SIST EN ISO 14823-1:2024

SLOVENSKI STANDARD
01-julij-2024
Nadomešča:
SIST EN ISO 14823:2017
Inteligentni transportni sistemi - Seznam grafičnih simbolov - 1. del: Specifikacija
(ISO 14823-1:2024)
Intelligent transport systems - Graphic data dictionary - Part 1: Specification (ISO 14823-
1:2024)
Intelligente Verkehrssysteme - Graphisches Verzeichnis - Teil 1: Spezifikation (ISO
14823-1:2024)
Systèmes de transport intelligents - Dictionnaire de données graphiques - Partie 1:
Spécification (ISO 14823-1:2024)
Ta slovenski standard je istoveten z: EN ISO 14823-1:2024
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 14823-1
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2024
EUROPÄISCHE NORM
ICS 35.240.60; 43.040.15 Supersedes EN ISO 14823:2017
English Version
Intelligent transport systems - Graphic data dictionary -
Part 1: Specification (ISO 14823-1:2024)
Systèmes de transport intelligents - Dictionnaire de Intelligente Verkehrssysteme - Graphisches
données graphiques - Partie 1: Spécification (ISO Verzeichnis - Teil 1: Spezifikation (ISO 14823-1:2024)
14823-1:2024)
This European Standard was approved by CEN on 7 March 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14823-1:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 14823-1:2024) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2024, and conflicting national standards
shall be withdrawn at the latest by November 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14823:2017.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 14823-1:2024 has been approved by CEN as EN ISO 14823-1:2024 without any
modification.
International
Standard
ISO 14823-1
First
Intelligent transport systems —
edition
Graphic data dictionary —
2024-05
Part 1:
Specification
Systèmes de transport intelligents — Dictionnaire de données
graphiques —
Partie 1: Spécification
Reference number
ISO 14823-1:2024(en) © ISO 2024

ISO 14823-1:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 14823-1:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 3
5 Conformance . 3
6 Requirements . 3
7 Structure of pictogram code. 4
7.1 General .4
7.2 Current and deprecated signs .4
7.3 Relative object identifier .5
7.4 Country code .5
7.5 Pictogram code and object identifier (OID) node information .6
8 Numbering of pictogram codes . 8
8.1 General .8
8.2 Mnemonic of the pictogram code .8
8.3 Pictogram code (without country code) no. 11111 to no. 11999: Traffic sign pictograms
(danger warning) .8
8.4 Pictogram code (without country code) no. 12111 to no. 12999: Traffic sign pictograms
(regulatory) . 15
8.5 Pictogram code (without country code) no. 13111 to no. 13992: Traffic sign pictograms
(informative) .24
8.6 Pictogram code (without country code) no. 21111 to no. 21999: Public facilities
pictograms (public facilities) . 33
8.7 Pictogram code (without country code) no. 31111 to no. 31999: Ambient conditions
pictograms (ambient condition) . . 35
8.8 Pictogram code (without country code) no. 32111 to no. 32999: Ambient conditions
pictograms (road condition) . 36
8.9 Pictogram code (without country code) no. 41111 to no. 41999: Supplementary panel
pictograms . 36
Annex A (normative) ASN.1 description of GDD (version 2) .42
Annex B (normative) Attributes of GDD (version 2) .43
Annex C (informative) UML diagram of GDD (version 2) .53
Annex D (normative) Specializations (version 2) .56
Annex E (normative) ASN.1 description of GDD (version 1) .58
Annex F (normative) Attributes of GDD (version 1) .59
Annex G (informative) UML diagram of GDD (version 1) .65
Annex H (normative) List of directions at diverging point .66
Annex I (informative) Example GDD data set for the United Nations (UN) and selected countries .70
Annex J (informative) Pictogram code and OID node information (version 1) .71
Bibliography .73

iii
ISO 14823-1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are describe
...