SIST EN ISO 7010:2020/A7:2025
(Amendment)Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 7 (ISO 7010:2019/Amd 7:2023)
Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 7 (ISO 7010:2019/Amd 7:2023)
Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte Sicherheitszeichen - Änderung 7 (ISO 7010:2019/Amd 7:2023)
Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité enregistrés - Amendement 7 (ISO 7010:2019/Amd 7:2023)
Grafični simboli - Varnostne barve in varnostni znaki - Registrirani varnostni znaki - Dopolnilo 7 (ISO 7010:2019/Amd 7:2023)
General Information
Relations
Overview
EN ISO 7010:2020/A7:2024 is Amendment 7 to the harmonized European adoption of ISO 7010 (Graphical symbols - Safety colours and safety signs). Approved by CEN in December 2024, this amendment adds three registered safety signs to the ISO 7010 repertoire and clarifies implementation notes. The amendment is identical to ISO 7010:2019/Amd 7:2023 and will be adopted as a national standard across CEN member countries by mid‑2025.
Key topics and requirements
- New registered safety signs added
- P075 - Do not stare at light source
- Function: prohibit staring at a light source.
- Image content: human eye + light source with seven radiating lines.
- Note: standardized/registered as IEC 60417‑6159‑1.
- W079 - Warning; Hot content
- Function: warn of hot contents (liquid, gas or other media).
- Image content: three parallel vertical S‑shaped lines in a circle.
- W080 - Warning; Hot steam
- Function: warn of emission of hot steam.
- Image content: plume of steam above a horizontal line.
- Note: symbol standardized as IEC 60417‑5597 (“Steam, low jet”).
- P075 - Do not stare at light source
- Sign metadata required: each registered sign is documented with referent, function, image content, hazard, intended human behaviour and additional information.
- Comprehension/testing guidance: ISO 9186‑1 test data are not available for these three signs; therefore a supplementary text sign is recommended to increase comprehension unless the sign is supported by manuals, instructions or training.
- Colour matching: electronic colour reproduction is not reliable; for colourimetric and photometric properties, follow ISO 3864‑4.
- Availability: all signs are available on the ISO Online Browsing Platform (OBP).
Practical applications
- Use these registered safety signs in workplaces and installations where optical radiation, high‑temperature contents or hot steam present hazards - e.g., manufacturing plants, food and beverage processing, boiler rooms, laboratory equipment, medical/laser devices.
- Typical users:
- Safety managers and EHS professionals implementing hazard communication
- Sign and label manufacturers creating compliant pictograms
- Machinery and equipment designers integrating safety markings
- Training and technical documentation authors providing supporting text
- National standards bodies and compliance officers responsible for adoption
Related standards
- ISO 7010 (main standard for registered safety signs)
- ISO 3864‑4 (colourimetric and photometric properties for safety colours)
- ISO 9186‑1 (graphical symbol legibility and comprehensibility testing)
- IEC 60417 (registered graphical symbols database; referenced IEC numbers for P075 and W080)
This amendment helps organizations maintain consistent, standardized hazard communication by expanding the ISO 7010 symbol set and providing implementation guidance for new pictograms.
Frequently Asked Questions
SIST EN ISO 7010:2020/A7:2025 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 7 (ISO 7010:2019/Amd 7:2023)". This standard covers: Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 7 (ISO 7010:2019/Amd 7:2023)
Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 7 (ISO 7010:2019/Amd 7:2023)
SIST EN ISO 7010:2020/A7:2025 is classified under the following ICS (International Classification for Standards) categories: 01.080.10 - Public information symbols. Signs. Plates. Labels; 01.080.20 - Graphical symbols for use on specific equipment; 13.200 - Accident and disaster control. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 7010:2020/A7:2025 has the following relationships with other standards: It is inter standard links to SIST EN ISO 7010:2020. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN ISO 7010:2020/A7:2025 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2025
Grafični simboli - Varnostne barve in varnostni znaki - Registrirani varnostni znaki
- Dopolnilo 7 (ISO 7010:2019/Amd 7:2023)
Graphical symbols - Safety colours and safety signs - Registered safety signs -
Amendment 7 (ISO 7010:2019/Amd 7:2023)
Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte
Sicherheitszeichen - Änderung 7 (ISO 7010:2019/Amd 7:2023)
Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité
enregistrés - Amendement 7 (ISO 7010:2019/Amd 7:2023)
Ta slovenski standard je istoveten z: EN ISO 7010:2020/A7:2024
ICS:
01.080.10 Simboli za javno obveščanje. Public information symbols.
Znaki. Table. Označbe Signs. Plates. Labels
13.200 Preprečevanje nesreč in Accident and disaster control
katastrof
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 7010:2020/A7
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 01.080.20; 01.080.10
English Version
Graphical symbols - Safety colours and safety signs -
Registered safety signs - Amendment 7 (ISO
7010:2019/Amd 7:2023)
Symboles graphiques - Couleurs de sécurité et signaux Graphische Symbole - Sicherheitsfarben und
de sécurité - Signaux de sécurité enregistrés - Sicherheitszeichen - Registrierte Sicherheitszeichen -
Amendement 7 (ISO 7010:2019/Amd 7:2023) Änderung 7 (ISO 7010:2019/Amd 7:2023)
This amendment A7 modifies the European Standard EN ISO 7010:2020; it was approved by CEN on 15 December 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7010:2020/A7:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 7010:2019/Amd 7:2023 has been prepared by Technical Committee ISO/TC 145
"Graphical symbols” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 7010:2020/A7:2024 by CCMC.
This Amendment to the European Standard EN ISO 7010:2020 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2025, and
conflicting national standards shall be withdrawn at the latest by June 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 7010:2019/Amd 7:2023 has been approved by CEN as EN ISO 7010:2020/A7:2024
without any modification.
INTERNATIONAL ISO
STANDARD 7010
Third edition
2019-07
AMENDMENT 7
2023-07
Graphical symbols — Safety colours
and safety signs — Registered safety
signs
AMENDMENT 7
Symboles graphiques — Couleurs de sécurité et signaux de sécurité —
Signaux de sécurité enregistrés
AMENDEMENT 7
Reference number
ISO 7010:2019/Amd.7:2023(E)
ISO 7010:2019/Amd.7:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
i
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...