13.200 - Accident and disaster control

This document specifies the standard data concepts that comprise the "Minimum Set of Data" (MSD) to be transferred from a vehicle to a 'Public Safety Answering Point' (PSAP) in the event of a crash or emergency via an 'eCall' communication transaction.
Optional additional data concepts may also be transferred.
The communications media protocols and methods for the transmission of the eCall message are not specified in this document.

This part of IEC 63005 describes test methods on evaluating performance of basic
functionalities of EVDR described in IEC 63005-1.

This document defines the accuracy, credibility and confidence in the results of virtual crash test to roadside safety devices through the definition of procedures for verification, validation and development of numerical models for roadside safety application. Finally it defines a list of indications to ensure the competences of an expert/organization in the domain of virtual testing.

IEC TR 60479-4:2020 (E) summarizes the basic parameters for lightning and its variability insofar as they apply to human beings and livestock.
The possible direct and indirect interactions of strikes with bodies of living beings are indicated. The resulting effects caused by lightning currents for the organism are described.
This document shows the differences of effects on human beings and livestock due to lightning strokes versus those effects of electric shocks derived from electrical syste...view more

IEC 60479-2 describes the effects on the human body when a sinusoidal alternating current in the frequency range above 100 Hz passes through it. The effects of current passing through the human body for: - alternating sinusoidal current with DC components, - alternating sinusoidal current with phase control, and - alternating sinusoidal current with multicycle control are given but are only deemed applicable for alternating current frequencies from 15 Hz up to 100 Hz. Means of extending the freq...view more

IEC 60479-1 provides basic guidance on the effects of shock current on human beings and livestock. For a given current path through the human body, the danger to persons depends mainly on the magnitude and duration of the current flow. However, the time/current zones specified in the following clauses are, in many cases, not directly applicable in practice for designing measures of protection against electrical shock. The necessary criterion is the admissible limit of touch voltage (i.e. the pro...view more

This document prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation.
The shape and colour of each safety sign are according to ISO 3864‑1 and the design of the graphical symbols is according to ISO 3864‑3.
This document is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic...view more

IEC TR 60479-4:2020 (E) summarizes the basic parameters for lightning and its variability insofar as they apply to human beings and livestock.
The possible direct and indirect interactions of strikes with bodies of living beings are indicated. The resulting effects caused by lightning currents for the organism are described.
This document shows the differences of effects on human beings and livestock due to lightning strokes versus those effects of electric shocks derived from electrical syste...view more

The purpose of this new standard is to specify test methods and performance requirements for remotely monitored breath alcohol testing devices. It covers remote alcohol monitoring devices intended to be used by participants in programmes designed to monitor abstinence or restricted alcohol consumption.

This document defines an eCall "Optional Additional Data" concept for the "Minimum Set of Data" (MSD) to be transferred from a vehicle to a 'Public Safety Answering Point' (PSAP) in the event of a crash or emergency via an 'eCall' communication transaction.
This document defines:
a)   Protocol requirements to ensure phone user consent to the provision of the linked 'phone number to the PSAP in the event of an eCall triggering incident;
b)   Definition of the OAD concept "Linked mobile Telephone N...view more

This document defines an eCall "Optional Additional Data" concept for the "Minimum Set of Data" (MSD) to be transferred from a vehicle to a 'Public Safety Answering Point' (PSAP) in the event of a crash or emergency via an 'eCall' communication transaction.
This document defines:
a)   Protocol requirements to ensure phone user consent to the provision of the linked 'phone number to the PSAP in the event of an eCall triggering incident;
b)   Definition of the OAD concept "Linked mobile Telephone N...view more

This document specifies requirements for the impact performance of systems designed for the reduction of impact severity for PTW riders impacting safety barriers whilst sliding along the ground, having fallen from their PTW vehicle. The protection systems concerned are those fitted to barriers or barriers that have an inherent PTW rider protection or risk reduction capability. This document excludes the assessment of the vehicle restraint capabilities of barriers and the risk that they represent...view more

This document specifies requirements for the impact performance of systems designed for the reduction of impact severity for PTW riders impacting safety barriers whilst sliding along the ground, having fallen from their PTW vehicle. The protection systems concerned are those fitted to barriers or barriers that have an inherent PTW rider protection or risk reduction capability. This document excludes the assessment of the vehicle restraint capabilities of barriers and the risk that they represent...view more

IEC 60479-2:2019 describes the effects on the human body when a sinusoidal alternating current in the frequency range above 100 Hz passes through it.
The effects of current passing through the human body for:
– alternating sinusoidal current with DC components,
– alternating sinusoidal current with phase control, and
– alternating sinusoidal current with multicycle control
are given but are only deemed applicable for alternating current frequencies from 15 Hz up to 100 Hz.
Means of extendi...view more

The purpose of this new standard is to define a list of functionalities for a standard connector / interface between the vehicle and the alcohol interlock, which can be used for communication between the vehicle and the alcohol interlock in both directions for information exchange. It specifies the interface for an aftermarket installation of alcohol interlocks

IEC 60479-1:2018(E) provides basic guidance on the effects of shock current on human beings and livestock.
This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. It is not intended for use by manufacturers or certification bodies.

This part of IEC 63005 describes basic requirements for event video data recorders (EVDRs)
for road vehicle accidents, used for identifying and analysing causes of accidents based on
video from a front-mounted camera and other information obtained before and after such
events. In addition to video from a front-mounted camera and vehicle behaviour, these
products can record side and/or rear video data for enhanced functionalities in determining
causes of accidents and analysing collision eve...view more

The present document describes the protocol specifications for emergency service caller location determination and
transport architecture as specified in ETSI ES 203 178 [1].

IEC 60799:2018 is also available as IEC 60799:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60799:2018 specifies requirements for cord sets and interconnection cord sets for household and similar general purpose equipment. It does not apply to cord sets for industrial purposes (with plugs and connectors according to IEC 60309) nor to cord extension sets. This third edition cancels ...view more