SIST EN ISO 3822-2:1999
(Main)Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995)
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995)
Describes the mounting and operating conditions to be used for draw-off taps and mixing valves when measuring noise emmission resulting from water flow. Replaces the first edition, which has been technically revised.
Prüfung des Geräuschverhaltens von Armaturen und Geräten der Wasserinstallation im Laboratorium - Teil 2: Anschluß- und Betriebsbedingungen für Auslaufarmaturen und für Mischbatterien (ISO 3822-2:1995)
Acoustique - Mesurage en laboratoire du bruit émis par les robinetteries et les équipements hydrauliques utilisés dans les installations de distribution d'eau - Partie 2: Conditions de montage et de fonctionnement des robinets de puisage et des robinetteries (ISO 3822-2:1995)
La présente partie de l'ISO 3822 définit les conditions de montage et de fonctionnement à utiliser pour mesurer le bruit, résultant de l'écoulement de l'eau, émis par les robinets de puisage et les robinetteries sanitaires. Les méthodes décrites sont d'une utilisation générale pour tous les types de robinets de puisage, de mélangeurs et de mitigeurs de conception conventionnelle et s'appliquent à un intervalle de pression recommandé allant de 0,1 MPa à 0,5 MPa 1). Les conditions de montage et de fonctionnement s'appliquent aux ensembles robinets de puisage, mélangeurs et mitigeurs équipés des accessoires d'entrée et de sortie qui sont normalement fournis avec ces robinets tels que coudes, raccords, etc., mais en excluant les accessoires de sortie interchangeables tels qu'aérateurs, flexibles de douche, douches, brise-jet, etc. Ces accessoires sont remplacés par des résistances hydrauliques de débit acoustiques normalisées de classe inférieure. Quand les accessoires de sortie précités ne so 900nt ni interchangeables, ni amovibles, les essais sont alors menés avec ces accessoires maintenus en place. Les accessoires interchangeables sont essayés séparément, conformément aux méthodes décrites dans les autres parties de cette norme internationale. Les mitigeurs thermostatiques destinés à alimenter une installation comprenant plusieurs robinets de puisage indépendants et des robinets de bidets par alimentation par gorge dans le corps de celui-ci ne sont pas considérés comme des équipements conventionnels et ne sont pas couverts par la présente partie de l'ISO 3822. De même, les robinets actionnés électriquement sont considérés comme des appareils combinés (électrovalve et orifices de sortie) et ne sont pas couverts par la présente partie de l'ISO 3822. Les méthodes d'essais couvrent un intervalle de pressions dynamiques allant de 0,1 MPa à 0,5 MPa.
Akustika - Laboratorijski preskusi emisije hrupa armatur in naprav pri inštalacijah za oskrbo z vodo - 2. del: Pogoji za priključitev in delovanje izpustnih armatur in mešalnih ventilov (ISO 3822-2:1995)
General Information
- Status
- Published
- Publication Date
- 31-Oct-1999
- Technical Committee
- AKU - Acoustics
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Nov-1999
- Due Date
- 01-Nov-1999
- Completion Date
- 01-Nov-1999
- Directive
- 89/106/EEC - Construction products
Overview
EN ISO 3822-2:1995 is a CEN-adopted acoustics standard that defines the mounting and operating conditions to be used in laboratory tests of noise emission from draw-off taps and mixing valves in water supply installations. Part 2 of the ISO 3822 series focuses specifically on how these fixtures should be installed and operated during controlled acoustic measurements so results are reproducible and comparable between test laboratories. This edition replaces the first technically revised edition.
Key topics
- Scope and purpose: clarifies that the standard applies to laboratory measurement of noise generated by water flow through taps and mixing valves used in building water supply systems.
- Mounting conditions: requirements for how taps and mixing valves are to be fixed to test rigs or panels to simulate realistic installation while minimizing extraneous structure-borne noise.
- Operating conditions: guidance on the flow and pressure conditions, valve positions, and operating modes to be used during acoustic tests to ensure consistent and repeatable measurements.
- Test environment and reproducibility: considerations for laboratory set-up to reduce background noise and variability, enabling meaningful comparison across tests.
- Measurement protocol and reporting: expectations for documenting test set-up, operating parameters, and measured noise emissions so results are traceable and useful for product assessment.
(Note: the standard text provides detailed procedural requirements; this summary avoids inventing specific numerical test values or thresholds.)
Applications
EN ISO 3822-2:1995 is practical for:
- Manufacturers of draw-off taps and mixing valves seeking to evaluate and reduce hydraulic noise during product development.
- Independent test laboratories performing standardized noise emission tests for compliance, product data sheets, or comparative studies.
- Acoustic and plumbing engineers assessing fixture selection and installation impacts on sanitary system noise in buildings.
- Product certification bodies and specifiers who require standardized noise data for procurement and compliance decisions.
Using this standard helps stakeholders produce reliable, repeatable acoustic data that can inform quieter product designs and better installation practices in residential, commercial, and institutional water supply systems.
Related standards
- Other parts of the ISO 3822 series and national/adopted versions (EN ISO) cover laboratory noise tests for additional appliances and equipment used in water supply installations.
- Complementary standards on acoustic measurement, plumbing system testing, and product noise declaration may be referenced when establishing a complete test program.
Keywords: EN ISO 3822-2, acoustics standard, noise emission, draw-off taps, mixing valves, water supply installations, laboratory tests, mounting conditions, operating conditions, noise testing.
Frequently Asked Questions
SIST EN ISO 3822-2:1999 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995)". This standard covers: Describes the mounting and operating conditions to be used for draw-off taps and mixing valves when measuring noise emmission resulting from water flow. Replaces the first edition, which has been technically revised.
Describes the mounting and operating conditions to be used for draw-off taps and mixing valves when measuring noise emmission resulting from water flow. Replaces the first edition, which has been technically revised.
SIST EN ISO 3822-2:1999 is classified under the following ICS (International Classification for Standards) categories: 17.140.20 - Noise emitted by machines and equipment; 91.140.60 - Water supply systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 3822-2:1999 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/BC/CEN/91/8. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN ISO 3822-2:1999 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-1999
$NXVWLND/DERUDWRULMVNLSUHVNXVLHPLVLMHKUXSDDUPDWXULQQDSUDYSULLQãWDODFLMDK
]DRVNUER]YRGRGHO 3RJRML]DSULNOMXþLWHYLQGHORYDQMHL]SXVWQLKDUPDWXULQ
PHãDOQLKYHQWLORY ,62
Acoustics - Laboratory tests on noise emission from appliances and equipment used in
water supply installations - Part 2: Mounting and operating conditions for draw-off taps
and mixing valves (ISO 3822-2:1995)
Prüfung des Geräuschverhaltens von Armaturen und Geräten der Wasserinstallation im
Laboratorium - Teil 2: Anschluß- und Betriebsbedingungen für Auslaufarmaturen und für
Mischbatterien (ISO 3822-2:1995)
Acoustique - Mesurage en laboratoire du bruit émis par les robinetteries et les
équipements hydrauliques utilisés dans les installations de distribution d'eau - Partie 2:
Conditions de montage et de fonctionnement des robinets de puisage et des
robinetteries (ISO 3822-2:1995)
Ta slovenski standard je istoveten z: EN ISO 3822-2:1995
ICS:
17.140.20 Emisija hrupa naprav i
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...