SIST EN ISO 11117:2020/oprA1:2026

SLOVENSKI STANDARD
01-marec-2026
Plinske jeklenke - Zaščitne kape in varovala ventilov plinskih jeklenk -
Konstruiranje, izdelava in preskusi - Dopolnilo A1 (ISO 11117:2019/DAM 1:2026)
Gas cylinders - Valve protection caps and guards - Design, construction and tests -
Amendment 1 (ISO 11117:2019/DAM 1:2026)
Gasflaschen - Ventilschutzkappen und Schutzkörbe - Auslegung, Bau und Prüfungen -
Änderung 1 (ISO 11117:2019/DAM 1:2026)
Bouteilles à gaz - Chapeaux fermés et chapeaux ouverts de protection des robinets -
Conception, construction et essais - Amendement 1 (ISO 11117:2019/DAM 1:2026)
Ta slovenski standard je istoveten z: EN ISO 11117:2019/prA1
ICS:
23.020.35 Plinske jeklenke Gas cylinders
23.060.99 Drugi ventili Other valves
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
Amendment
ISO 11117:2019/
DAM 1
ISO/TC 58/SC 2
Gas cylinders — Valve protection
Secretariat: AFNOR
caps and guards — Design,
construction and tests
Voting begins on:
2026-01-15
AMENDMENT 1
Voting terminates on:
2026-04-09
Bouteilles à gaz — Chapeaux fermés et chapeaux ouverts de
protection des robinets — Conception, construction et essais
AMENDEMENT 1
ICS: 23.020.35; 11.040.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO 11117:2019/DAM 1:2026(en)
DRAFT
ISO 11117:2019/DAM 1:2026(en)
Amendment
ISO 11117:2019/
DAM 1
ISO/TC 58/SC 2
Gas cylinders — Valve protection
Secretariat: AFNOR
caps and guards — Design,
construction and tests
Voting begins on:
AMENDMENT 1
Voting terminates on:
Bouteilles à gaz — Chapeaux fermés et chapeaux ouverts de
protection des robinets — Conception, construction et essais
AMENDEMENT 1
ICS: 23.020.35; 11.040.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2026
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO 11117:2019/DAM 1:2026(en)
ii
ISO 11117:2019/DAM 1:2026(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters
...