SIST EN ISO 22568-1:2019/A1:2026

SLOVENSKI STANDARD
01-marec-2026
Ščitniki nog in stopal - Zahteve in preskusne metode za sestavne dele obutve - 1.
del: Kovinske zaščitne kapice - Dopolnilo A1 (ISO 22568-1:2019/Amd 1:2025)
Foot and leg protectors - Requirements and test methods for footwear components - Part
1: Metallic toecaps - Amendment 1 (ISO 22568-1:2019/Amd 1:2025)
Fuß- und Beinschutz - Anforderungen und Prüfverfahren für Schuhkomponenten - Teil 1:
Metallische Zehenkappen - Änderung 1 (ISO 22568-1:2019/Amd 1:2025)
Protecteurs du pied et de la jambe - Exigences et méthodes d'essais pour les
composants de chaussure - Partie 1: Embouts métalliques - Amendement 1 (ISO 22568-
1:2019/Amd 1:2025)
Ta slovenski standard je istoveten z: EN ISO 22568-1:2019/A1:2025
ICS:
13.340.50 Varovanje nog in stopal Leg and foot protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 22568-1:2019/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2025
EUROPÄISCHE NORM
ICS 13.340.50
English Version
Foot and leg protectors - Requirements and test methods
for footwear components - Part 1: Metallic toecaps -
Amendment 1 (ISO 22568-1:2019/Amd 1:2025)
Protecteurs du pied et de la jambe - Exigences et Fuß- und Beinschutz - Anforderungen und
méthodes d'essais pour les composants de chaussure - Prüfverfahren für Schuhkomponenten - Teil 1:
Partie 1: Embouts métalliques - Amendement 1 (ISO Metallische Zehenkappen - Änderung 1 (ISO 22568-
22568-1:2019/Amd 1:2025) 1:2019/Amd 1:2025)
This amendment A1 modifies the European Standard EN ISO 22568-1:2019; it was approved by CEN on 13 March 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22568-1:2019/A1:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 22568-1:2019/A1:2025) has been prepared by Technical Committee ISO/TC 94
"Personal safety -- Personal protective equipment" in collaboration with Technical Committee CEN/TC
161 “Foot and leg protectors” the secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 22568-1:2019 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2026, and
conflicting national standards shall be withdrawn at the latest by June 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 22568-1:2019/Amd 1:2025 has been approved by CEN as EN ISO 22568-
1:201
...