Oil and gas industries including lower carbon energy - Cathodic protection of pipeline systems - Part 1: On-land pipelines (ISO/DIS 15589-1:2024)

ISO 15589-1:2015 specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, installation, commissioning, operation, inspection, and maintenance of cathodic protection systems for on-land pipelines, as defined in ISO 13623 or EN 14161 for the petroleum, petrochemical, and natural gas industries, and in EN 1594 or EN 12007‑1 and EN 12007‑3 used by gas supply industries in Europe.
All contents of this part of ISO 15589 are applicable to on-land pipelines and piping systems used in other industries and transporting other media such as industrial gases, waters, or slurries.
ISO 15589-1:2015 applies to buried pipelines, landfalls of offshore pipeline sections protected by on-shore based cathodic protection installations, and to immersed sections of on-land pipelines such as river or lake crossings.
ISO 15589-1:2015 specifies requirements for pipelines of carbon steel, stainless steel, cast iron, galvanized steel, or copper. If other pipeline materials are used, the criteria to apply are defined under the responsibility of the pipeline operator.
ISO 15589-1:2015 does not apply to pipelines made of reinforced concrete for which EN 12696 can be applied.
NOTE Special conditions sometimes exist where cathodic protection is ineffective or only partially effective. Such conditions can include shielding (e.g. disbonded coatings, thermal-insulating coatings, rocky soil, etc.) and unusual contaminants in the electrolyte.

Öl- und Gasindustrie einschließlich kohlenstoffarmer Energieträger - Kathodischer Korrosionsschutz für Rohrleitungssysteme - Teil 1: Rohrleitungen an Land (ISO/DIS 15589-1:2024)

Industries du pétrole et du gaz y compris les énergies à faible teneur en carbone - Protection cathodique des systèmes de transport par conduites - Partie 1: Conduites terrestres (ISO/DIS 15589-1:2024)

La présente partie de l'ISO 15589 spécifie les exigences et donne des recommandations pour les études de préinstallation, la conception, les matériaux, l'équipement, l'installation, la mise en service, l'exploitation, l'inspection et la maintenance des systèmes de protection cathodique destinés aux conduites terrestres. Les conduites terrestres sont définies dans l'ISO 13623 ou l'EN 14161 relatives aux industries du pétrole, pétrochimiques et du gaz naturel. Elles sont également décrites dans l'EN 1594, l'EN 12007-1 et l'EN 12007-3 utilisées par les industries de fourniture de gaz en Europe.
La présente partie de l'ISO 15589 est applicable aux conduites terrestres et aux systèmes de conduites utilisés dans d'autres industries et transportant d'autres fluides comme les gaz industriels, les eaux ou les boues liquides.
Dans l'ensemble du présent document, le terme « conduites terrestres » désigne :
—    les conduites qui sont enterrées ;
—    les atterrages de tronçons de conduites en mer protégées par des installations de protection cathodique basées à terre ;
—    les tronçons immergés de conduites terrestres tels que les traversées de cours d'eau ou de lacs.
La présente partie de l'ISO 15589 spécifie les exigences concernant les conduites en acier au carbone, en acier inoxydable, en fonte, en acier galvanisé et en cuivre. Si d'autres matériaux sont utilisés pour les conduites, les critères de protection à appliquer doivent être placés sous la responsabilité de l'exploitant des conduites.
La présente partie de l'ISO 15589 ne s'applique pas aux conduites constituées de béton armé. L'ISO 12696 peut être appliquée aux conduites de ce type.
Note         Dans des conditions particulières, la protection cathodique peut s'avérer inefficace ou seulement partiellement efficace. De telles conditions peuvent comprendre un effet d'écran (par exemple, des décollements de revêtements, des revêtements thermo-isolants, un sol rocheux, des selles de poids et des coussins de soutien non conducteurs) et la présence de contaminants inhabituels dans l'électrolyte.

Naftna in plinska industrija, vključno z nizkoogljično energijo - Katodna zaščita cevovodov - 1. del: Cevovodi na kopnem (ISO/DIS 15589-1:2024)

General Information

Status
Not Published
Public Enquiry End Date
26-Jun-2024
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
11-Apr-2024
Due Date
29-Aug-2024

Relations

Buy Standard

Draft
prEN ISO 15589-1:2024
English language
89 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 15589-1:2024
01-junij-2024
Naftna in plinska industrija, vključno z nizkoogljično energijo - Katodna zaščita
cevovodov - 1. del: Cevovodi na kopnem (ISO/DIS 15589-1:2024)
Oil and gas industries including lower carbon energy - Cathodic protection of pipeline
systems - Part 1: On-land pipelines (ISO/DIS 15589-1:2024)
Öl- und Gasindustrie einschließlich kohlenstoffarmer Energieträger - Kathodischer
Korrosionsschutz für Rohrleitungssysteme - Teil 1: Rohrleitungen an Land (ISO/DIS
15589-1:2024)
Industries du pétrole et du gaz y compris les énergies à faible teneur en carbone -
Protection cathodique des systèmes de transport par conduites - Partie 1: Conduites
terrestres (ISO/DIS 15589-1:2024)
Ta slovenski standard je istoveten z: prEN ISO 15589-1
ICS:
75.200 Oprema za skladiščenje Petroleum products and
nafte, naftnih proizvodov in natural gas handling
zemeljskega plina equipment
oSIST prEN ISO 15589-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 15589-1:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 15589-1:2024
DRAFT
International
Standard
ISO/DIS 15589-1
ISO/TC 67/SC 2
Oil and gas industries including
Secretariat: UNI
lower carbon energy — Cathodic
Voting begins on:
protection of pipeline systems —
2024-04-05
Part 1:
Voting terminates on:
2024-06-28
On-land pipelines
Industries du pétrole, de la pétrochimie et du gaz naturel —
Protection cathodique des systèmes de transport par conduites —
Partie 1: Conduites terrestres
ICS: 75.200
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 15589-1:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 15589-1:2024
DRAFT
ISO/DIS 15589-1:2024(en)
International
Standard
ISO/DIS 15589-1
ISO/TC 67/SC 2
Oil and gas industries including
Secretariat: UNI
lower carbon energy — Cathodic
Voting begins on:
protection of pipeline systems —
Part 1:
Voting terminates on:
On-land pipelines
Industries du pétrole, de la pétrochimie et du gaz naturel —
Protection cathodique des systèmes de transport par conduites —
Partie 1: Conduites terrestres
ICS: 75.200
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 15589-1:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 15589-1:2024
ISO/DIS 15589-1:2024(en)
Contents Page
Foreword .vi
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.