iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 1459:1973

(Main)

Metallic coatings - Protection against corrosion by hot dip galvanizing - Guiding principles

Metallic coatings - Protection against corrosion by hot dip galvanizing - Guiding principles

Revêtements métalliques — Protection contre la corrosion par galvanisation à chaud — Principes directeurs

General Information

Status
Withdrawn
Publication Date
30-Jun-1973
Withdrawal Date
30-Jun-1973
ICS
25.220.40 - Metallic coatings
Technical Committee
ISO/TC 107/SC 4 - Hot dip coatings (galvanized, etc.)
Drafting Committee
ISO/TC 107/SC 4 - Hot dip coatings (galvanized, etc.)
Current Stage
9599 - Withdrawal of International Standard
Start Date
04-Feb-1999
Completion Date
13-Dec-2025
Ref Project

Relations

Revised
ISO 1461:1999 - Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods
Effective Date
15-Apr-2008
ISO 1459:1973 - Metallic coatings — Protection against corrosion by hot dip galvanizing — Guiding principles Released:7/1/1973ISO 1459:1973 - Metallic coatings — Protection against corrosion by hot dip galvanizing — Guiding principles Released:7/1/1973
PreviousNext
Standard
ISO 1459:1973 - Metallic coatings — Protection against corrosion by hot dip galvanizing — Guiding principles Released:7/1/1973
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Frequently Asked Questions

ISO 1459:1973 is a standard published by the International Organization for Standardization (ISO). Its full title is "Metallic coatings - Protection against corrosion by hot dip galvanizing - Guiding principles". This standard covers: Metallic coatings - Protection against corrosion by hot dip galvanizing - Guiding principles

Metallic coatings - Protection against corrosion by hot dip galvanizing - Guiding principles

ISO 1459:1973 is classified under the following ICS (International Classification for Standards) categories: 25.220.40 - Metallic coatings. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 1459:1973 has the following relationships with other standards: It is inter standard links to ISO 1461:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO 1459:1973 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO 1461:2022(Main)
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods

This document specifies the general properties of hot dip galvanized coatings and test methods for hot dip galvanized coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). This document does not apply to the following: a) sheet, wire and woven or welded mesh products that are continuously hot dip galvanized; b) tube and pipe that are hot dip galvanized in automatic plants; c) hot dip galvanized products (e.g. fasteners) for which specific standards exist and which can include additional requirements or requirements which are different from those of this document. NOTE Individual product standards can incorporate this document for the galvanized coating by quoting its number, or can incorporate it with modifications specific to the product. Different requirements can also be made for galvanized coatings on products intended to meet specific regulatory requirements. This document does not apply to after-treatment or additional coating of hot dip galvanized articles.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
ISO
ISO 1460:2020(Main)
Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area

This document specifies a method of determining the mass per unit area of hot dip galvanized coatings on ferrous materials. Since an exact knowledge of the area of the surface is essential, this document is mainly applicable to shapes whose areas are easy to determine. If, with heavy samples, the specifications of Clause 7 cannot be met, then the hot dip galvanized coating mass is determined by another method.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 14713-2:2019(Main)
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing

This document gives guidelines and recommendations for the general principles of design appropriate to articles to be hot dip galvanized after fabrication (e.g. in accordance with ISO 1461) for the corrosion protection of, for example, articles that have been manufactured in accordance with EN 1090-2. This document does not apply to hot dip galvanized coatings applied to continuous wire or sheet (e.g. to EN 10346).

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    23 pages
    French language
    sale 15% off
ISO
ISO 14713-3:2017(Main)
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing

ISO 14713-3:2017 provides guidelines and recommendations regarding the general principles of design that are appropriate for articles to be sherardized for corrosion protection. The protection afforded by the sherardized coating to the article will depend upon the method of application of the coating, the design of the article and the specific environment to which the article is exposed. The sherardized article can be further protected by application of additional coatings (outside the scope of this document), such as organic coatings (wet paints or powder coatings). When applied to sherardized articles, this combination of coatings is often known as a "duplex system". General guidance on this subject can be found in ISO 12944‑5 and EN 13438. The maintenance of corrosion protection in service for steel with sherardized coatings is outside the scope of this document. Specific product-related requirements (e.g. for sherardized coatings on fasteners or tubes, etc.) will take precedence over these general recommendations.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 14713-1:2017(Main)
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance

ISO 14713-1:2017 provides guidelines and recommendations regarding the general principles of design which are appropriate for articles to be zinc coated for corrosion protection and the level of corrosion resistance provided by zinc coatings applied to iron or steel articles, exposed to a variety of environments. Initial protection is covered in relation to - available standard processes, - design considerations, and - environments for use. ISO 14713-1:2017 applies to zinc coatings applied by the following processes: a) hot dip galvanized coatings (applied after fabrication); b) hot dip galvanized coatings (applied onto continuous sheet); c) sherardized coatings; d) thermal sprayed coatings; e) mechanically plated coatings; f) electrodeposited coatings. These guidelines and recommendations do not deal with the maintenance of corrosion protection in service for steel with zinc coatings. Guidance on this subject can be found in ISO 12944‑5 and ISO 12944‑8.

  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    22 pages
    French language
    sale 15% off
ISO
ISO 17668:2016(Main)
Zinc diffusion coatings on ferrous products - Sherardizing - Specification

ISO 17668:2016 specifies minimum thickness requirements for six classes of zinc diffusion layers applied to ferrous products by the sherardizing process for the purpose of protection against corrosion and wear. ISO 17668:2016 does not specify any requirements for the surface condition (finish or roughness) of the basis material before sherardizing. Post-treatments (conversion coatings), after-treatments or organic over-coatings (Duplex) of sherardized articles are not in the scope of this International Standard. NOTE 1 For general information about post-treatments, see Annex C and Annex D. ISO 17668:2016 does not apply to sherardized products (e.g. fasteners, tubes) for which specific standards exist and which might include additional requirements or requirements which are different from those of this International Standard. NOTE 2 Individual product standards can incorporate this International Standard for the coating by quoting its number, or can incorporate it with modification specific to the product.

  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off
ISO
ISO 2081:2025(Main)
Metallic and other inorganic coatings - Electroplated coatings on iron and steel using zinc treated with solutions containing chromium (VI)

This document specifies requirements for electroplated coatings of zinc with supplementary treatments using hexavalent chromium compounds on iron or steel. It includes information to be supplied by the purchaser to the electroplater, and the requirements for heat treatment before and after electroplating. This document is not applicable to zinc coatings applied: - to sheet, strip or wire in the non-fabricated form; - to close-coiled springs; - for purposes other than protective and decorative. This document does not specify requirements for the surface condition of the basis metal prior to electroplating with zinc. However, defects in the surface of the basis metal can adversely affect the appearance and performance of the coating. The coating thickness that can be applied to threaded components can be limited by dimensional requirements, including class or fit.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
ISO
ISO 12994:2025(Main)
Electrodeposited nickel plus chromium coatings for automobile plastic parts - Specification and test requirements

This document specifies requirements for electrodeposited metallic decorative coatings for automobile plastic parts, including test requirements. This document does not apply to such coatings on plastics to be used for aerospace, electronics and engineering fields other than automobile applications. This document applies to automobile plastic parts. It differs from ISO 4525, which is not applicable for engineering purposes.

  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 24251-1:2025(Main)
Prevention of hydrogen assisted brittle fracture of high-strength steel components - Part 1: Fundamentals and measures

This document provides guidance on the prevention of hydrogen assisted brittle fracture, known as hydrogen embrittlement (HE), that results from the manufacturing process or operating conditions. This document is applicable to components or parts made of high strength steels. This document provides guidance on the relationship between material selection, manufacturing (including heat treatment) and coating. NOTE 1 For hot-dip galvanizing components, see ISO 14713-2. NOTE 2 This document does not consider applications under pressurised hydrogen.

  • Standard
    23 pages
    English language
    sale 15% off
ISO
ISO 2361:2025(Main)
Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method

This document specifies the method for non-destructive thickness measurement via the magnetic type of electrodeposited nickel coatings, also called “e-nickel”, on magnetic or non-magnetic substrates. It is possible that the method is not applicable to autocatalytic (electroless) nickel coatings, since these coatings are often non-magnetic due to their chemical composition. For the purposes of this document, two types of substrates are distinguished: a) nickel coatings on magnetic substrates (type A coatings); b) nickel coatings on non-magnetic substrates (type B coatings). Not all instruments are applicable to both types of coating. The effective measuring ranges of instruments using the principle of magnetic attraction are up to 50 µm for type A coatings and up to 25 µm for type B coatings. For instruments using the principle of reluctance, the effective ranges are much greater, up to 1 mm or even more. This method is applicable to both types of coatings.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off