ISO 2374:1983
(Main)Lifting appliances - Range of maximum capacities for basic models
Lifting appliances - Range of maximum capacities for basic models
Sets forth the recommended range of maximum capacities of cranes from 0,1 to 1000 t. Applies to all types of cranes.
Appareils de levage — Gamme des charges nominales pour les modèles de base
General Information
- Status
- Published
- Publication Date
- 31-Oct-1983
- Technical Committee
- ISO/TC 96/SC 2 - Terminology
- Drafting Committee
- ISO/TC 96/SC 2 - Terminology
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 04-Jan-2023
- Completion Date
- 13-Dec-2025
Overview
ISO 2374:1983 is an international standard published by the International Organization for Standardization (ISO) that establishes the recommended range of maximum lifting capacities for basic models of cranes. Covering capacities from 0.1 tonne to 1,000 tonnes, this standard applies universally to all types of cranes and lifting appliances. It aims to provide consistency in the classification and rating of crane lifting capacities across various industries and countries.
The standard was developed by ISO Technical Committee ISO/TC 96, which specializes in cranes, lifting appliances, and related equipment. It was approved by member bodies of numerous countries, ensuring broad international acceptance and relevance.
Key Topics
Maximum Capacity (Safe Working Load)
The maximum load that a lifting appliance is designed to safely suspend. This is based on design calculations and applies to specific crane types and conditions. Different nomenclatures such as lifting capacity and safe working load are synonymous but “maximum capacity” is preferred.Basic Model Definition
The basic model refers to the primary version of a lifting appliance. This version serves as the foundation for various modifications involving changes in jib length, running gear type, rope systems, and more, while retaining the same fundamental design capacity.Range of Capacities
The standard lists recommended maximum capacities organized within ranges from 0.1 t to 1,000 t. These values are intended to help manufacturers and users standardize crane designations and compare equipment effectively.Application to All Crane Types
ISO 2374:1983 applies to all crane types irrespective of their configurations, ensuring a harmonized approach across the crane manufacturing and operational spectrum.
Applications
ISO 2374:1983 is essential for various stakeholders involved in crane design, manufacturing, procurement, and operation, including:
- Manufacturers benefit by adhering to an internationally recognized capacity range, facilitating design consistency, and easing product classification.
- Purchasers and Operators can use the standard to select suitable cranes with reliable, standardized maximum capacities ensuring safety and compatibility with operational requirements.
- Regulatory Bodies and Safety Inspectors apply the standard to verify compliance with safe lifting limits and contribute to workplace safety enforcement.
- Engineering and Design Teams rely on ISO 2374 to guide the development of crane variants and adaptations based on a solid foundation model.
Related Standards
- ISO 9927 – Inspection, maintenance, and operation of cranes
- ISO 8686 – Calculation of load capacities for cranes
- ISO 4301 – Classification of cranes
- ISO 12480 – Crane operator training and qualification
Each of these standards complements ISO 2374 by addressing specific aspects of crane safety, design, testing, and operation, giving a comprehensive framework for crane industry best practices.
Keywords: ISO 2374, crane capacities standard, lifting appliance capacity, crane maximum load, safe working load, crane classification, lifting equipment standards, crane design, lifting appliance regulation
ISO 2374:1983 - Lifting appliances -- Range of maximum capacities for basic models
ISO 2374:1983 - Appareils de levage -- Gamme des charges nominales pour les modeles de base
ISO 2374:1983 - Appareils de levage -- Gamme des charges nominales pour les modeles de base
Frequently Asked Questions
ISO 2374:1983 is a standard published by the International Organization for Standardization (ISO). Its full title is "Lifting appliances - Range of maximum capacities for basic models". This standard covers: Sets forth the recommended range of maximum capacities of cranes from 0,1 to 1000 t. Applies to all types of cranes.
Sets forth the recommended range of maximum capacities of cranes from 0,1 to 1000 t. Applies to all types of cranes.
ISO 2374:1983 is classified under the following ICS (International Classification for Standards) categories: 53.020.01 - Lifting appliances in general. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 2374:1983 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWMEIKAYHAPOL1HAR OPTAHM3AUHR fl0 CTAH~APTl43ALWl@ORGANISATION INTERNATIONALE DE NORMALISATION
Lifting appliances - Range of maximum capacities for
basic models
Gamme des charges nominales pour les modeles de base
Appareils de levage -
First edition - 1983-11-15
UDC 621.873/.877 : 62-18 Ref. No. ISO 2374-1983 (EI
Gi
-
Descriptors : Iifting equipment, cranes (hoists), ratings, nominal capacity.
E
Price based on 1 page
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bedies). The work of developing International
Standards is carried out through ISO technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard 2374 was developed by Technical Committee ISO/TC 96,
Cranes, lifting appliances and related eguipment, and was circulated to the member
bodies in February 1983.
lt has been approved by the member bodies of the following countries:
Australia
Fin land Netherlands
Austria France Norway
Belgium
Germany, F. R. Poland
Brazil India United Kingdom
China
Israel USSR
Czechoslovakia Italy
Egypt, Arab Rep. of
Korea, Dem. P. Rep. of
No member body expressed disapproval sf the document.
0 International Organkation for Standardkation, 1983
Printed in Switzerland
ISO 2374-1983 (E)
IINTERNATIONAL STA
...
Norme internationale @ 2374
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION*ME~YHAPO~HAfl OPrAHHIAUHfl Il0 CTAHIIAPTb43AUHHWRGANlSATlON INTERNATIONALE DE NORMAL ISATlnN
Appareils de levage - Gamme des charges nominales
pour les modèles de base
Lifting appliances - Range of maximum capacities for basic models
Première édition - 1983-11-15
CDU 621.873/ .877 : 62-18 Rbf. no : IS0 2374-1983 (FI
Descripteurs : appareil de levage, grue, caractéristique nominale, capacit6 nominale.
Prix basé sur 1 page
Avant-propos
L‘ISO (Organisation internationale de normalisation) est une fédération mondiale
d‘organismes nationaux de normalisation (comités membres de I’ISO). L‘élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale IS0 2374 a été élaborée par le comité technique ISO/TC 96,
Grues, appareils de levage et dquipernents correspondants, et a été soumise aux comi-
tés membres en février 1983.
Les comités membres des pays suivants l‘ont approuvée:
Allemagne, R. F. Egypte, Rép. arabe d’ Pays-Bas
Australie Finlande Pologne
Autriche France Royaume-Uni
Belgique inde Tchécoslovaquie
Brésil Israël URSS
Chine Italie
Corée, Rép. dém. p. de Norvhge
Aucun comité membre ne l’a désapprouvée.
0 Organisation internationale de normalisation, 1983 0
lrnorirnb en Suisse
NOR M E I NTE R NAT1 O NA LE IS0 2374-19
...
e internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION~ME~YHAPOfiHAR OPTAHM3AL&lR fl0 CTAH~APTbl3A~MM~ORGANISATION INTERNATIONALE DE NORMALISATION
Appareils de levage - Gamme des charges nominales
pour les modèles de base
Lifting appliances - Range of maximum capacities for basic models
Première édition - 1983-11-15
Réf. no : ISO 2374-1983 (F)
CDU 621.8731.877 : 62-18
Descripteurs : appareil de levage, grue, caractéristique nominale, capacité nominale.
Prix basé sur 1 page
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 2374 a été élaborée par le comité technique ISO/TC 96,
Grues, appareils de levage et équipements correspondants, et a été soumise aux comi-
tés membres en février 1983.
Les comites membres des pays suivants l’ont approuvée:
Allemagne, R.F.
Égypte, Rép. arabe d’ Pays-Bas
Australie
Finlande Pologne
Autriche
France Royaume-Uni
Belgique Inde Tchécoslovaquie
Brésil
Israël URSS
Chine Italie
Corée, Rép. dém. p. de Norvége
Aucun comité membre ne l’a désapprouvée.
0 Organisation internationale de normalisation, 1983
Imprimé en Suisse
~~
NORME INTERNATIONALE ISO 2374-1983 (F)
Appareils de levage - Gamme des charges nominales
pour les modèles de base
1 Objet et
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...