iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 81400-4:2005/Cor 1:2005

(Corrigendum)

Wind turbines — Part 4: Design and specification of gearboxes — Technical Corrigendum 1

Wind turbines — Part 4: Design and specification of gearboxes — Technical Corrigendum 1

This standard applies to gearboxes for wind turbines with power capacities ranging from40 kWto 2MW. It applies to all parallel axis, one stage epicyclic, and combined one stage epicyclic and parallel shaft enclosed gearboxes. The provisions made in this standard are based on field experience with wind turbines having the above power capacities and configurations. Guidelines of this standard may be applied to higher capacity wind turbines provided the specifications are appropriately modified to accommodate the characteristics of higher capacity wind turbines. Life requirements apply to wind turbines with a minimum design lifetime of 20 years.

Aérogénérateurs — Partie 4: Conception et spécifications relatives aux boîtes de vitesses — Rectificatif technique 1

Vetrne elektrarne – 4. del: Oblikovanje in določitev gonil – Tehnični popravek 1

General Information

Status
Withdrawn
Publication Date
06-Dec-2005
Withdrawal Date
06-Dec-2005
ICS
21.200 - Gears
27.180 - Wind turbine energy systems
Technical Committee
ISO/TC 60 - Gears
Drafting Committee
ISO/TC 60 - Gears
Current Stage
9599 - Withdrawal of International Standard
Completion Date
05-Dec-2012
Ref Project
SIST ISO 81400-4:2006/TC1:2006 - ISO 81400-4:2005/Cor 1:2005

Relations

Revised
IEC 61400-4:2012 - Wind turbines — Part 4: Design requirements for wind turbine gearboxes
Effective Date
15-Apr-2008
Corrects
ISO 81400-4:2005 - Wind turbines — Part 4: Design and specification of gearboxes
Effective Date
06-Jun-2022
Child
ISO 81400-4:2005 - Wind turbines — Part 4: Design and specification of gearboxes
Effective Date
15-Apr-2008
Child
SIST ISO 81400-4:2006 - Wind turbines -- Part 4: Design and specification of gearboxes
Effective Date
12-May-2008

Buy Standard

ISO 81400-4:2006/TC1:2006ISO 81400-4:2006/TC1:2006
PreviousNext
Corrigendum
ISO 81400-4:2006/TC1:2006
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SIST ISO 81400-4:2006/TC1:2006SLOVENSKIdecember 2006
STANDARDVetrne elektrarne – 4. del: Oblikovanje in določitev gonil – Tehnični popravek 1Wind turbines - Part 4: Design and specification of
gearboxes - Technical Corrigendum 1©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST ISO 81400-4:2006/TC1:2006(en)ICS21.200; 27.180







ICS
21.200;
27.180 Ref. No. ISO 81400-4:2005/Cor.1:2005(E)©
ISO 2005 – All rights reserved Printed in Switzerland
INTERNATIONAL STANDARD ISO 81400-4:2005 TECHNICAL CORRIGENDUM 1 Published 2005-12-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
•
•
ORGANISATION INTERNATIONALE DE NORMALISATION
Wind turbines —
Part 4: Design and specification of gearboxes TECHNI
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
IEC 61400-4:2012(Main)
Wind turbines — Part 4: Design requirements for wind turbine gearboxes

IEC 61400-4:2012(E) is applicable to enclosed speed increasing gearboxes for horizontal axis wind turbine drivetrains with a power rating in excess of 500 kW. This standard applies to wind turbines installed onshore or offshore. It Standard provides guidance on the analysis of the wind turbine loads in relation to the design of the gear and gearbox elements. The gearing elements covered by this standard include such gears as spur, helical or double helical and their combinations in parallel and epicyclic arrangements in the main power path. The standard is based on gearbox designs using rolling element bearings. Also included is guidance on the engineering of shafts, shaft hub interfaces, bearings and the gear case structure in the development of a fully integrated design that meets the rigours of the operating conditions. Lubrication of the transmission is covered along with prototype and production testing. Finally, guidance is provided on the operation and maintenance of the gearbox.

  • Standard
    146 pages
    English language
    sale 15% off
ISO
IEC 61400-4:2012(Main)
Wind turbines — Part 4: Design requirements for wind turbine gearboxes

IEC 61400-4:2012(E) is applicable to enclosed speed increasing gearboxes for horizontal axis wind turbine drivetrains with a power rating in excess of 500 kW. This standard applies to wind turbines installed onshore or offshore. It Standard provides guidance on the analysis of the wind turbine loads in relation to the design of the gear and gearbox elements. The gearing elements covered by this standard include such gears as spur, helical or double helical and their combinations in parallel and epicyclic arrangements in the main power path. The standard is based on gearbox designs using rolling element bearings. Also included is guidance on the engineering of shafts, shaft hub interfaces, bearings and the gear case structure in the development of a fully integrated design that meets the rigours of the operating conditions. Lubrication of the transmission is covered along with prototype and production testing. Finally, guidance is provided on the operation and maintenance of the gearbox.

  • Standard
    146 pages
    English language
    sale 15% off
ISO
ISO 20200:2023(Main)
Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test

This document specifies a method of determining the degree of disintegration of plastic materials when exposed to a laboratory-scale composting environment. The method is not applicable to the determination of the biodegradability of plastic materials under composting conditions. Further testing is necessary to be able to claim compostability.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 9241-221:2023(Main)
Ergonomics of human-system interaction — Part 221: Human-centred design process assessment model

This document specifies the process references model (PRM) for human-centred design (HCD) according to ISO 9241-220, as well as the process assessment model (PAM) for assessing these processes, based on ISO/IEC 33020 and in accordance with the requirements of ISO/IEC 33004. This HCD PAM contains a set of indicators to be considered while interpreting the intent of the HCD PRM defined in ISO 9241-220. These indicators can also be applied when implementing a process improvement programme post an assessment. NOTE 1 The PRM in this document focuses on assessing HCD processes rather than system life cycle, for example as in ISO/IEC/IEEE 15288, or software life cycle, as in ISO/IEC/IEEE 12207. NOTE 2 If processes beyond the scope of ISO 9241-220 are required, appropriate processes from other PRMs, such as ISO/IEC/IEEE 12207, ISO/IEC/IEEE 15288 or ISO/TS 18152, can be added based on the business needs of the organization. The intended application of this document is computer-based interactive systems. While the processes apply to interactive systems that deliver services, they do not cover the design of those services. The relevant aspects of the processes can also be applied to simple or non-computer-based interactive systems. NOTE 3 HCD concentrates on the human-centred aspects of design and not on other aspects of design, such as mechanical construction, programming or the basic design of services. The process descriptions in this document provide the basis for a rigorous assessment of an enterprise’s capability to carry out human-centred processes in conformity with the ISO/IEC 33004 and ISO/IEC 33020. This document is intended for use by organizations that want to address and improve their treatment of human-centred design of either their internal systems or the products and services they provide, and the procurement of systems and parts of systems. The processes can be applied by small- and medium-sized enterprises as well as by large organizations. NOTE 4 The scope of application of the PAM is the same as that of the PRM, which is described in ISO 9241-220:2019, Clause 1.

  • Standard
    102 pages
    English language
    sale 15% off
ISO
ISO/TS 24665:2023(Main)
Playground and recreational areas — Framework for the competence of playground inspectors and playground maintenance technicians

This document gives guidance and requirements for the education, examination and evaluation of the inspectors’ and maintenance technicians’ competence concerning public playground and recreational areas. This document describes the knowledge and competence required for each specific task an inspector or technician performs. This document is intended primarily for public playgrounds, but the principles are applicable to other recreational areas. This document does not include benefit/risk assessment methods. This document does not cover the competence of staff conducting product certification. NOTE 1 The different types of inspections covered are: routine visual inspection; operational inspection; annual main inspection; post-installation inspection; post-accident inspection; pre-installation consultation; mid-installation surveillance. NOTE 2 This document can be applicable to: roller-sport infrastructure; multi-sport arenas; outdoor exercise equipment; bouldering walls; portable and permanent socketed goals; parkour facilities; adventure playgrounds; ropes courses; inflatable play equipment.

  • Technical specification
    23 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
ISO
ISO 19642-1:2023(Main)
Road vehicles — Automotive cables — Part 1: Vocabulary and design guidelines

This document defines terms in the field of cables applied in road vehicle general purpose applications, for use in the other parts of the ISO 19642 series.

  • Standard
    27 pages
    English language
    sale 15% off
ISO
ISO 23316-7:2023(Main)
Tractors and machinery for agriculture and forestry — Electrical high-power interface 700 V DC / 480 V AC — Part 7: Mechanical integration

This document instructs the manufacturers of tractors and implements how to integrate mechanically and use the HPI. NOTE The terms "tractor" and "implement” are used instead of “supply system” and “consumer system” for better understanding in this part.

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO/IEC 9797-1:2011/Amd 1:2023(Amendment)
Information technology — Security techniques — Message Authentication Codes (MACs) — Part 1: Mechanisms using a block cipher — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
ISO
ISO 5714:2023(Main)
Clean cookstoves and clean cooking solutions — Test protocols for institutional cookstoves

This document provides testing methods to evaluate the energy performance, emissions, safety and durability of institutional cookstoves. For general guidance (not a requirement), institutional cookstoves typically have firepower greater than 10 kW and/or cooking vessel volume greater than 25 l. The evaluation of household cookstoves is covered in ISO19867-1 and ISO19869 and is not addressed in this document. This document provides the following: — quantitative and qualitative measurements of performance and safety of institutional cookstoves – methods include uncontrolled and controlled cooking tests; — guidance for the measurement of air pollution, and; — guidance for prioritizing measurements that balance comprehensiveness and feasibility. This document includes testing methods for energy performance, emissions and durability that are applicable to institutional cookstoves that burn solid, liquid, and gaseous fuels and for energy performance, safety and durability that are applicable to institutional cookstoves powered by solar thermal energy. Safety testing methods are applicable to institutional solar cookstoves and cookstoves that burn solid fuels and are not applicable to cookstoves that burn liquid or gaseous fuels, such as LPG (liquefied petroleum gas), alcohol, plant oil or kerosene. Safety evaluation of gas-fuelled cookstoves can be found in ISO 23550 and the ISO 23551 series. Safety evaluation of liquid-fuelled cookstoves is not found in existing ISO standards. This document is not applicable to electric cookstoves.

  • Standard
    17 pages
    English language
    sale 15% off
ISO
ISO 7055:2023(Main)
Natural gas — Upstream area — Determination of drag reduction in laboratory for slick water

This document specifies a method for the determination of drag reduction of slick water, which is mainly used to evaluate the drag reduction performance of slick water. This document uses the pipeline method to evaluate the drag reduction, which is currently recognized as the best method to evaluate the drag reduction performance. This document describes the device, experimental conditions and operating steps in detail. The drag reduction value obtained by evaluation according to this document can effectively represent the on-site drag reduction performance.

  • Standard
    5 pages
    English language
    sale 15% off