Amendment 1 - Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens

Amendement 1 - Appareils électrodomestiques et analogues - Sécurité - Partie 2-25: Règles particulières pour les fours à micro-ondes, y compris les fours à micro-ondes combinés

General Information

Status
Published
Publication Date
11-Aug-2014
Current Stage
DELPUB - Deleted Publication
Completion Date
08-Jan-2020
Ref Project

Relations

Buy Standard

Standard
IEC 60335-2-25:2010/AMD1:2014 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens Released:8/12/2014
English and French language
12 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60335-2-25 ®
Edition 6.0 2014-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Household and similar electrical appliances – Safety –
Part 2-25: Particular requirements for microwave ovens, including combination
microwave ovens
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-25: Règles particulières pour les fours à micro-ondes, y compris les
fours à micro-ondes combinés
IEC 60335-2-25:2010-09/AMD1:2014-08(en-fr)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie

et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des

questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 55 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 60335-2-25 ®
Edition 6.0 2014-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Household and similar electrical appliances – Safety –

Part 2-25: Particular requirements for microwave ovens, including combination

microwave ovens
Appareils électrodomestiques et analogues – Sécurité –

Partie 2-25: Règles particulières pour les fours à micro-ondes, y compris les

fours à micro-ondes combinés
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX F
ICS 97.040.20 ISBN 978-2-8322-1783-2

– 2 – IEC 60335-2-25:2010/AMD1:2014

© IEC 2014
FOREWORD
This amendment has been prepared by subcommittee 61B: Safety of microwave appliances

for household and commercial use, of IEC technical committee 61: Safety of household and

similar electrical appliances.

The text of this amendment is based on the following documents:

FDIS Report on voting
61B/494/FDIS 61B/505/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations can need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation
nationally not earlier than 12 months or later than 36 months from the date of publication.
_____________
2 Normative references
Add the following reference to the existing list:

IEC 60335-2-5:2012, Household and similar electrical appliances – Safety – Part 2-5:
Particular requirements for dishwashers
7 Marking and instructions
7.12 Addition:
Add, after the sixth dashed item, the following new dash:
– Metallic containers for food and beverages are not allowed during microwave cooking.
This requirement is not applicable if the manufacturer specifies size and shape of metallic
containers suitable for microwave cooking.
Add, after the last dashed item, the following new dash:
– The instructions for use for fixed appliances and built-in appliances being used equal or
higher than 900 mm above the floor and having detachable turntables shall state that care

© IEC 2014
should be taken not to displace the turntable when removing containers from the

appliance. This is not applicable for appliances with horizontal bottom hinged door.

Add, after the last paragraph, the following new paragraph:

The instructions for microwave ovens that are not in compliance with 22.118 shall state that

the appliance must not be installed equal or higher than 900 mm above the floor.

15 Moisture resistance
Add, after 15.101, the following new subclauses:

15.102 Microwave ovens intended to be built-in as underbench installation and therefore
subject to spillage of liquid from containers onto working surfaces shall be constructed so that
such spillage does not affect their electrical insulation.
Compliance is checked by the following test (see Figure 102).
The microwave oven is built-in as underbench installation as specified by the manufacturer.
The test cabinet including the working surface is tilted to an angle of 2° in the most
unfavourable direction. 500 ml of water containing approximately 1 % NaCl and approximately
0,6 % acid rinsing agent is poured steadily over a period of 20 s through a funnel onto the
complete width of the working surface above the microwave oven. The funnel has an outlet
diameter of approximately 8 mm and the lower edge of its outlet is positioned 20 mm above
the working surface. The centre of the funnel is positioned 15 mm inwards from the leading
edge of the working surface.
The leading edge of the working surface shall be rounded with a radius of 25 mm and the
working surface shall be 50 mm in thickness and free of any drain slots, drain edges, tearing
edges and similar.
Immediately after the test, the appliance shall withstand the electric strength test of 16.3 and
inspection shall show that there is no trace of water on insulation that could result in a
reduction of clearances or creepage distances below the values specified in Clause 29.
The composition of the water containing approximately 1 % NaCl and approximately 0,6 %
acid rinsing agent is described in Annex AA of IEC 60335-2-5:2012.
15.103 Microwave ovens intended to be built-in in cabinets underneath other built-in
appliances and therefore subject to spillage of liquid from filled containers which are handled
during usage of these other appliances shall be constructed so that such spillage does not

affect their electrical insulation.
Compliance is checked by the following test (see Figure 103).
The microwave oven is built-in as specified by the manufacturer. The test cabinet is tilted to
an angle of 2° in the most unfavourable direction. 200 ml of water containing approximately
1 % NaCl and approximately 0,6 % acid rinsing agent is poured steadily over a period of 8 s
through a funnel onto the complete width of the separation board above the microwave oven.
The funnel has an outlet diameter of approximately 8 mm and the lower edge of its outlet is
positioned 20 mm above the separation board. The centre of the funnel is positioned 15 mm
inwards from the leading edge of the separation board.
If the manufacturer states in the installation instructions that a separation board above the
microwave oven is not required, the test shall be repeated while pouring the water containing
approximately 1 % NaCl and approximately 0,6 % acid rinsing agent directly onto the
complete width of the top surface of the microwave oven. The lower edge of the funnel outlet

– 4 – IEC 60335-2-25:2010/AMD1:2014

© IEC 2014
is positioned 20 mm above the top surface of the microwave oven and its centre is

positioned 15 mm inwards from the leading edge of the microwave oven.

Immediately after the test, the appliance shall withstand the electric strength test of 16.3 and

inspection shall show that there is no trace of water on insulation that could result in a

reduction of clearances or creepage distances below the values specified in Clause 29.

The composition of the water containing approximately 1 % NaCl and approximately 0,6 %

acid rinsing agent is described in Annex AA of IEC 60335-2-5:2012.

22 Construction
Add, after 22.117, the following new subclause:
22.118 Inadvertent operations during handling of the container during normal use of fixed
appliances and built-in appliances being used equal or higher than 900 mm above the floor
having detachable turntables shall not lead to a hazardous situation due to falling down
turntables. This is not applicable for appliances with horizontal bottom hinged door.
Compliance is checked by inspection and the following test.
The bearing of the detachable turntable of microwave ovens shall be placed in the most
unfavourable position. A force which will be increased from 0 N up to the maximum of 10 N is
applied vertically downwards to the front edge of the turntable.
During the test, the turntable shall not slide out of the cavity and fall down.
A cylindrical container of borosilicate glass with a maximum thickness of 3 mm, an external
diameter of approximately 190 mm, a height of approximately 90 mm and an outer bottom
curvature of approximately 5 mm is filled with 1 000 g ± 50 g cold water and placed on the
turntable. With a horizontal force applied at the top of the container which will be increased
from 0 N up to the maximum of 10 N an attempt is m
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.