IEC 60364-5-52:2009/COR1:2011

SLOVENSKI SIST IEC 60469-2:2005

STANDARD
junij 2005
Impulzna tehnika in naprave – 2. del: Merjenje in analiza impulzov, splošna
določila
Pulse techniques and apparatus – Part 2: Pulse measurement and analysis,
general considerations
ICS 17.080 Referenčna številka
SIST IEC 60469-2:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

NORME
CEI
INTERNATIONALE IEC
60469-2
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
1987-12
Techniques des impulsions et appareils
Deuxième partie:
Mesure et analyse des impulsions,
considérations générales
Pulse techniques and apparatus
Part 2:
Pulse measurement and analysis,
general considerations
© IEC 1987 Droits de reproduction réservés — Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
P
PRICE CODE
International Electrotechnical Commission
IEC MemsnyHaponuaH 3neKrporexHuvecKan Horouccua
Pour prix, voir catalogue en vigueur
•
For price, see current catalogue

---------------------- Page: 2 ----------------------

469-2 © I EC 1987 – 3 –
CONTENTS
Page
FOREWORD 5
PREFACE 5
Clause
1. General 7
1.1 Scope 7
1.2 Object 7
2. Definitions 7
2.1 Pulse measurement terms 7
2.2 Statistical terms 9
2.3 Waveform formats 9
11
2.4 Waveform epoch expansion and contraction
13
2.5 Reference pulse waveforms
3. Measurement of pulse characteristics 13
13
3.1 The distinction between waves and waveforms
15
3.2 Description of the pulse measurement process
15 3.3 Pulse to pulse waveform conversion
17
4. Pulse waveform analysis
17
4.1 Generality of pulse waveform analysis
19
4.2 Waveform epoch determination
19
4.3 Analysis of the single-pulse waveform
5. Analysis of transition waveforms 25
25
6. Analysis of complex waveforms
25 6.1 Analysis of combinations of pulses and transitions
25
6.2 Analysis of waveforms produced by magnitude superposition
27 6.3 Analysis of waveforms produced by pulse trains
27
6.4 Analysis of waveforms produced by pulse bursts
27
7. Analysis of time relationships between different waveforms
27
8. Analysis of pulse waveform distortion
27 9. Analysis of jitter and fluctuation
27
9.1 Analysis of jitter
29
9.2 Analysis of fluctuation
30
FIGURES

---------------------- Page: 3 ----------------------

469-2 © I E C 1987 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
PULSE TECHNIQUES AND APPARATUS
Part 2: Pulse measurement and analysis, general considerations
FOREWORD
1) The formal decisions or agreements of the I E C on technical matters, prepared by Technical Committees on which all the
National Committees having a special interest therein are represented, express, as nearly as possible, an international
consensus of opinion on the subjects dealt with.
2) ational use and they are accepted by the National Committees in that sense.
They have the form of recommendations for inte rn
3) In order to promote international unification, the I E C expresses the wish that all National Committees should adopt the text
of the I E C recommendation for their national rules in so far as national conditions will permit. Any divergence between the
I E C recommendation and the corresponding national rules should, as far as possible, be clearly indicated in the latter.
PREFACE
This standard has been prepared by Sub-Committee 66A: Generators, of IEC Technical Committee
No. 66 : Measuring Equipment for Electronic Techniques.
The text of this standard is based upon the following documents :
Six Months' Rule Report on Voting
66A(CO)39
66A(CO)37
Full information on the voting for the approval of this standard can be found in the Voting Report
indicated in the above table.
The following IEC publication is quoted in this standard:
Publication No. 469-1 (1987): Pulse Techniques and Apparatus, Part 1: Pulse Terms and Definitions.
Other publication quoted:
ISO Standard 3534 (1977): Statistics – Vocabulary and Symbols.

---------------------- Page: 4 ----------------------

469-2 © I E C 1987 – 7 -
PULSE TECHNIQUES AND APPARATUS
Part 2: Pulse measurement and analysis, general considerations
1. General
1.1 Scope
This standard provides definitions and descriptions of the techniques and procedures for time
domain pulse measurements. The defin
...