EN IEC 62372:2022

SLOVENSKI STANDARD
01-februar-2023
Jedrska merilna oprema - Scintilatorji v ohišju - Metode preskušanja svetlobnega
toka in intrinzične ločljivosti (IEC 62372:2021)
Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic
resolution (IEC 62372:2021)
Strahlungsmessgeräte - Ummantelte Szintillatoren - Prüfverfahren für Lichtabgabe und
intrinsische Auflösung (IEC 62372:2021)
Instrumentation nucléaire - Scintillateurs montés - Méthodes de mesure de la lumière
sortante et de résolution intrinsèque (IEC 62372:2021)
Ta slovenski standard je istoveten z: EN IEC 62372:2022
ICS:
27.120.01 Jedrska energija na splošno Nuclear energy in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62372

NORME EUROPÉENNE
EUROPÄISCHE NORM December 2022
ICS 27.120.01
English Version
Nuclear instrumentation - Housed scintillators - Test methods of
light output and intrinsic resolution
(IEC 62372:2021)
Instrumentation nucléaire - Scintillateurs montés - Strahlungsmessgeräte - Ummantelte Szintillatoren -
Méthodes de mesure de la lumière sortante et de résolution Prüfverfahren für Lichtabgabe und intrinsische Auflösung
intrinsèque (IEC 62372:2021)
(IEC 62372:2021)
This European Standard was approved by CENELEC on 2022-05-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62372:2022 E
European foreword
This document (EN IEC 62372:2022) consists of the text of IEC 62372:2021 prepared by IEC/SC 45B
“Radiation protection instrumentation” of IEC/TC 45 "Nuclear instrumentation".
The following dates are fixed:
• latest date by which this document has to be (dop) 2023-06-16
implemented at national level by publication of an
identical national standard or by endorsement
latest date by which the national standards (dow) 2025-12-16
•
conflicting with this document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN-CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN and CENELEC
websites.
Endorsement notice
The text of the International Standard IEC 62372:2021 was approved by CEN-CENELEC as a European
Standard without any modification.

IEC 62372 ®
Edition 2.0 2021-02
INTERNATIONAL
STANDARD
Nuclear instrumentation – Housed scintillators – Test methods of light output

and intrinsic resolution
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 27.120.01 ISBN 978-2-8322-9322-5

– 2 – IEC 62372:2021 © IEC 2021
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, symbols and abbreviated terms . 5
3.1 Terms and definitions . 5
3.2 Symbols and abbreviated terms . 7
4 Test methods of basic parameters of housed scintillators . 9
4.1 General . 9
4.1.1 Test conditions . 9
4.1.2 The sources of ionizing radiation . 9
4.1.3 The assembly test conditions . 10
4.2 Test methods of nonlinearity and instability of the assembly . 10
4.2.1 Nonlinearity measurement . 10
4.2.2 Instability measurement . 12
4.3 Test methods of the intrinsic resolution, light output of the housed scintillator
and PMT spectrometric constant . 13
4.3.1 Equipment . 13
4.3.2 Measurements . 13
4.3.3 Processing of results . 14
4.4 Test methods of the light output . 15
4.4.1 General . 15
4.4.2 Measurements . 15
4.4.3 Processing of results . 16
4.5 Test methods of the intrinsic resolution . 16
4.5.1 Determination of PMT spectrometric constant . 16
4.5.2 Test method of the intrinsic resolution for housed scintillator . 17
Bibliography . 19

Table 1 – Source of ionizing radiation . 9

IEC 62372:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
NUCLEAR INSTRUMENTATION – HOUSED SCINTILLATORS –
TEST METHODS OF LIGHT OUTPUT AND INTRINSIC RESOLUTION

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62372 has been prepared by IEC technical committee 45: Nuclear
instrumentation.
This second edition cancels and replaces the first edition published in 2006. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
• Title has been modified.
• To review the existing requirements and to update the terminology, definitions and
normative references.
– 4 – IEC 62372:2021 © IEC 2021
The text of this International Standard is based on the following documents:
FDIS Report on voting
45/913/FDIS 45/915/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IEC 62372:2021 © IEC 2021 – 5 –
NUCLEAR INSTRUMENTATION – HOUSED SCINTILLATORS –
TEST METHODS OF LIGHT OUTPUT AND INTRINSIC RESOLUTION

1 Scope
This document is applicable to housed scintillators for registration and spectrometry of alpha-,
beta-, gamma-, X-ray and neutron radiation.
The main parameters, such as a light output and intrinsic resolution are established. This
document specifies the requirements for the testing equipment and test methods of the basic
parameters of housed scintillators, such as:
• the direct method is applicable to measure the light output of housed scintillators based on
scintillation material. The housed scintillators certified by this method can be used as
working standard of housed scintillators (hereinafter: working standard) when performing
measurements by a relative method of comparison.
• the relative method of comparison with the working standard is applicable to housed
scintillators based on the same scintillation material as the working standard.
This document does not apply to gas or liquid scintillators and scintillators for counting and
current modes.
The numerical values of the parameters are set to the specific type of scintillators in the
specifications.
2 Normative references
There are no normative references in this document.
3 Terms, definitions, symbols and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1.1
scintillator
luminescent material, usually liquid or solid, showing radioluminescence with a sh
...