iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 62976:2019/A1:2022

(Amendment)

Industrial non-destructive testing equipment - Electron linear accelerator

Industrial non-destructive testing equipment - Electron linear accelerator

Industrielle Ausrüstung für die zerstörungsfreie Prüfung - Elektronenlinearbeschleuniger

This document gives the rules of naming, technical requirements, test methods, inspection, marking, packaging, transportation, storage and accompanying documents for electron linear accelerator equipment for Non-Destructive Testing (NDT). This document applies to NDT electron linear accelerator equipment in the X-ray energy range of 1 MeV to 15 MeV, including the accelerator equipment for radiographic film, computed radiography with imaging plates, real-time imaging, digital detector array and industrial computerized tomography.

Appareils destinés aux essais non destructifs pour le secteur industriel - Accélérateur électronique linéaire

Oprema za industrijsko neporušitveno preskušanje - Elektronski linearni pospeševalnik - Dopolnilo A1 (IEC 62976:2017/AMD1:2021)

General Information

Status
Published
Publication Date
15-Dec-2022
ICS
27.120.01 - Nuclear energy in general
Technical Committee
CLC/TC 45B - Radiation protection instrumentation
Drafting Committee
CLC/TC 45B - Radiation protection instrumentation
Current Stage
6060 - Document made available - Publishing
Start Date
16-Dec-2022
Due Date
18-Nov-2024
Completion Date
16-Dec-2022
Ref Project
SIST EN IEC 62976:2019/A1:2023 - Industrial non-destructive testing equipment - Electron linear accelerator (IEC 62976:2017/AMD1:2021)

Relations

Amends
EN IEC 62976:2019 - Industrial non-destructive testing equipment - Electron linear accelerator
Effective Date
26-Apr-2022

Buy Standard

EN IEC 62976:2019/A1:2023EN IEC 62976:2019/A1:2023
PreviousNext
Amendment
EN IEC 62976:2019/A1:2023
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2023
Oprema za industrijsko neporušitveno preskušanje - Elektronski linearni
pospeševalnik - Dopolnilo A1 (IEC 62976:2017/AMD1:2021)
Industrial non-destructive testing equipment - Electron linear accelerator (IEC
62976:2017/AMD1:2021)
Industrielle Ausrüstung für die zerstörungsfreie Prüfung - Elektronenlinearbeschleuniger
(IEC 62976:2017/AMD1:2021)
Appareils destinés aux essais non destructifs pour le secteur industriel - Accélérateur
électronique linéaire (IEC 62976:2017/AMD1:2021)
Ta slovenski standard je istoveten z: EN IEC 62976:2019/A1:2022
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
27.120.01 Jedrska energija na splošno Nuclear energy in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62976:2019/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM December 2022
ICS 27.120.01
English Version
Industrial non-destructive testing equipment - Electron linear
accelerator
(IEC 62976:2017/AMD1:2021)
Appareils destinés aux essais non destructifs pour le Industrielle Ausrüstung für die zerstörungsfreie Prüfung -
secteur industriel - Accélérateur électronique linéaire Elektronenlinearbeschleuniger
(IEC 62976:2017/AMD1:2021) (IEC 62976:2017/AMD1:2021)
This amendment A1 modifies the European Standard EN IEC 62976:2019; it was approved by CENELEC on 2022-05-24. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62976:2019/A1:2022 E

European foreword
This document (EN IEC 62976:2019/A1:2022) consists of the text of document
IEC 62976:2019/AMD1:2021, prepared by IEC/SC 45B “Radiation protection instrumentation” of
IEC/TC 45 "Nuclear instrumentation".
The following dates are fixed:
• latest date by which this document has to be (dop) 2023-06-16
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2025-12-16
conflicting with this document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN-CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN and CENELEC
websites.
Endorsement notice
The text of the International Standard IEC 62976:2019/AMD1:2021 was approved by CEN-CENELEC
as a European Standard without any modification.

IEC 62976 ®
Edition 1.0 2021-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Industrial non-destructive testing equipment – Electron linear accelerator
Appareils destinés aux essais non destructifs pour le secteur industriel –
Accélérateur électronique linéaire
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.120.01 ISBN 978-2-8322-5462-2
– 2 – IEC 62976:2017/AMD1:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL NON-DESTRUCTIVE TESTING EQUIPMENT –
ELECTRON LINEAR ACCELERATOR
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62372:2022(Main)
Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resolution
SIST EN IEC 62372:2023

This document is applicable to housed scintillators for registration and spectrometry of alpha-, beta-, gamma-, X-ray and neutron radiation. Their basic parameters such as a light output and intrinsic resolution are established. The document does not apply to gas or liquid scintillators and scintillators for counting or current measurement.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63047:2021(Main)
Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement
SIST EN IEC 63047:2021

This document specifies the format of binary list-mode data at the output of digital data acquisition devices used for the detection and measurement of radiation. Such data acquisition devices may employ digital signal processors (DSP) and field-programmable gate arrays (FPGA) in combination with memory and a communication interface with a computer.

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62976:2019(Main)
Industrial non-destructive testing equipment - Electron linear accelerator
SIST EN IEC 62976:2019

This document gives the rules of naming, technical requirements, test methods, inspection, marking, packaging, transportation, storage and accompanying documents for electron linear accelerator equipment for Non-Destructive Testing (NDT). This document applies to NDT electron linear accelerator equipment in the X-ray energy range of 1 MeV to 15 MeV, including the accelerator equipment for radiographic film,computed radiography with imaging plates, real-time imaging, digital detector array and industrial computerized tomography.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62372:2022(Main)
Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resolution
SIST EN IEC 62372:2023

This document is applicable to housed scintillators for registration and spectrometry of alpha-, beta-, gamma-, X-ray and neutron radiation. Their basic parameters such as a light output and intrinsic resolution are established. The document does not apply to gas or liquid scintillators and scintillators for counting or current measurement.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63047:2021(Main)
Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement
SIST EN IEC 63047:2021

This document specifies the format of binary list-mode data at the output of digital data acquisition devices used for the detection and measurement of radiation. Such data acquisition devices may employ digital signal processors (DSP) and field-programmable gate arrays (FPGA) in combination with memory and a communication interface with a computer.

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62976:2019(Main)
Industrial non-destructive testing equipment - Electron linear accelerator
SIST EN IEC 62976:2019

This document gives the rules of naming, technical requirements, test methods, inspection, marking, packaging, transportation, storage and accompanying documents for electron linear accelerator equipment for Non-Destructive Testing (NDT). This document applies to NDT electron linear accelerator equipment in the X-ray energy range of 1 MeV to 15 MeV, including the accelerator equipment for radiographic film,computed radiography with imaging plates, real-time imaging, digital detector array and industrial computerized tomography.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-9:2024(Main)
Rotating electrical machines - Part 9: Noise limits
SIST EN IEC 60034-9:2025

IEC 60034-9:2021 specifies test methods for the determination of sound power level of rotating electrical machines and specifies maximum A-weighted sound power levels for factory acceptance testing of network-supplied, rotating electrical machines in accordance with lEC 60034-1, having methods of cooling according to lEC 60034-6 and degrees of protection according to lEC 60034-5, and having the following characteristics: - standard design, either AC or DC, without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level - rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA) - rated speed not greater than 3 750 min–1 This fifth edition cancels and replaces the fourth edition, published in 2003 and its amendment 1, published in 2007. This edition includes the following significant technical changes with respect to the previous edition: a) In Table 2 and Table 3 cooling methods IC01, IC11, IC21 and IC31, IC71, IC81 are now covered. b) This edition adds Table 3 for 60 Hz machines, whereas Table 2, which covers only 50 Hz machines, has no change in levels. c) In Table 3, grade A is added to harmonize the highest levels seen in IEC and NEMA, whereas grade B was added to harmonize the lowest, more restrictive levels seen in IEC and NEMA. d) The clause “Determination of noise increments caused by converter supply” has been shifted to Annex B and renamed “Information on typical noise increments caused by converter supply”.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-12:2024(Main)
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
SIST EN IEC 60034-12:2025

IEC 60034-12:2024 is available as IEC 60034-12:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-12:2024 specifies the parameters for eight designs of starting performance of single-speed three-phase 50 Hz or 60 Hz cage induction motors in accordance with IEC 60034‑1 that: - have a rated voltage up to 1 000 V; - are intended for direct-on-line or star-delta starting; - are rated on the basis of duty type S1; - are constructed to any degree of protection as defined in IEC 60034-5 and explosion protection. This document also applies to dual voltage motors provided that the flux saturation level is the same for both voltages. This fourth edition cancels and replaces the third edition published in 2016. Aligned with the requirements for explosion protected motors from TC31 WG27 - new clause on methods for measuring locked-rotor current and torque; - new informative annex on the general current and torque characteristics with locked rotor; - new informative annex on correction of voltage and frequency; - aligned with the requirements for explosion protected motors from TC31 WG27.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60335-2-39:2024(Main)
Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
SIST EN IEC 60335-2-39:2025

IEC 60335-2-39:2012 deals with the safety of electrically operated commercial multi-purpose cooking pans not intended for household and similar use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. This standard also deals with pressurized appliances and appliances with pressurized parts. These appliances are used for processing food for commercial consumption, for example in kitchens of restaurants, canteens, hospitals and in commercial enterprises such as bakeries, butcheries, etc. The electrical part of appliances making use of other forms of energy is also within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by these types of appliances. Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary. The principal changes in this edition as compared with the fifth edition of IEC 60335-2-39 are as follows (minor changes are not listed): - addition to definition of portable appliances, atmospheric multi-purpose cooking and rated pressure; - deletion of equipotential symbol 5021 of IEC 60417 covered by Part 1; - addition of instructions for multi-purpose cooking pans; - modification on leakage current permissible for portable class l appliances; - addition to abnormal test requirements; - addition to mechanical hazard test for multi-purpose cooking pans; - addition of construction test for multi-purpose cooking pans; - addition to construction requirements for lids and theirs grips; - addition to construction requirements for positioning of pressure reliefs; - addition to construction's fixed appliances which are moved forward and backward for cleaning purposes.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: Multi-purpose cooking pans.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60335-2-40:2024(Main)
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
SIST EN IEC 60335-2-40:2025

This European Standard deals with the safety of electric heat pumps, sanitary hot water heat pumps and air conditioners, incorporating motor-compressors as well as hydronic fan coils units, dehumidifiers (with or without motor-compressors), thermoelectric heat pumps and partial units. Their maximum rated voltage being not more than 300 V for single phase appliances and 600 V for multi-phase appliances. Appliances not intended for normal household use but which nevertheless can be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.

  • Draft
    158 pages
    English language
    sale 10% off
    e-Library read for
    1 day