EN 60034-14:1996
(Main)Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration
Applies to d.c. and three-phase a.c. machines, with shaft heights 56 mm and higher and a rated power up to 50 MW, at nominal speeds from 600 rev/min up to and including 3 600 rev/min. For vertical machines, applies to those machines which are measured in a state of free suspension. This standard is not applicable to machines mounted in-situ
Drehende elektrische Maschinen - Teil 14: Mechanische Schwingungen von bestimmten Maschinen mit einer Achshöhe von 56 mm und höher - Messung, Bewertung und Grenzwerte der Schwingstärke
Machines électriques tournantes - Partie 14: Vibrations mécaniques de certaines machines de hauteur d'axe supérieure ou égale à 56 mm - Mesurage, évaluation et limites de la vibration
Applicable aux machines à courant continu et à courant alternatif triphasé de hauteur d'axe supérieure ou égale à 56 mm jusqu'à une puissance assignée de 50 MW, à des vitesses nominales de 600 tr/min. Pour les machines verticales, cette norme n'est applicable qu'à celles qui sont mesurées en état de suspension libre. Cette norme n'est pas applicable aux machines montées sur le site.
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration (IEC 60034-14:1996)
General Information
- Status
- Withdrawn
- Publication Date
- 12-Dec-1996
- Withdrawal Date
- 31-Jul-1997
- Technical Committee
- CLC/TC 2 - Rotating machinery
- Drafting Committee
- IEC/TC 2 - IEC_TC_2
- Parallel Committee
- IEC/TC 2 - IEC_TC_2
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Dec-2006
- Completion Date
- 01-Dec-2006
Relations
- Effective Date
- 29-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
UL Solutions
Global safety science company with testing, inspection and certification.
CEPREI Certification Center (Guangzhou Saibao)
Pioneer of third-party certification, subsidiary of Electronic Fifth Research Institute.
CESI Beijing Certification (Saisi)
Subsidiary of China Electronics Standardization Institute (CESI), established 1963.
Sponsored listings
Frequently Asked Questions
EN 60034-14:1996 is a standard published by CLC. Its full title is "Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration". This standard covers: Applies to d.c. and three-phase a.c. machines, with shaft heights 56 mm and higher and a rated power up to 50 MW, at nominal speeds from 600 rev/min up to and including 3 600 rev/min. For vertical machines, applies to those machines which are measured in a state of free suspension. This standard is not applicable to machines mounted in-situ
Applies to d.c. and three-phase a.c. machines, with shaft heights 56 mm and higher and a rated power up to 50 MW, at nominal speeds from 600 rev/min up to and including 3 600 rev/min. For vertical machines, applies to those machines which are measured in a state of free suspension. This standard is not applicable to machines mounted in-situ
EN 60034-14:1996 is classified under the following ICS (International Classification for Standards) categories: 17.160 - Vibrations, shock and vibration measurements; 29.160 - Rotating machinery. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60034-14:1996 has the following relationships with other standards: It is inter standard links to EN 60034-14:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60034-14:1996 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 60034-14:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1999
Rotating electrical machines - Part 14: Mechanical vibration of certain machines
with shaft heights 56 mm and higher - Measurement, evaluation and limits of
vibration (IEC 60034-14:1996)
Rotating electrical machines -- Part 14: Mechanical vibration of certain machines with
shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration
Drehende elektrische Maschinen -- Teil 14: Mechanische Schwingungen von bestimmten
Maschinen mit einer Achshöhe von 56 mm und höher - Messung, Bewertung und
Grenzwerte der Schwingstärke
Machines électriques tournantes -- Partie 14: Vibrations mécaniques de certaines
machines de hauteur d'axe supérieure ou égale à 56 mm - Mesurage, évaluation et
limites de la vibration
Ta slovenski standard je istoveten z: EN 60034-14:1996
ICS:
17.160 Vibracije, meritve udarcev in Vibrations, shock and
vibracij vibration measurements
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...