EN 60384-8:2015

SLOVENSKI STANDARD
01-september-2015
1DGRPHãþD
SIST EN 60384-8:2005
3ULWUMHQLNRQGHQ]DWRUML]DXSRUDERYHOHNWURQVNLRSUHPLGHO3RGURþQD
VSHFLILNDFLMDSULWUMHQLNRQGHQ]DWRUMLVNHUDPLþQLPGLHOHNWULNRPUD]UHG
Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed
capacitors of ceramic dielectric, Class 1
Condensateurs fixes utilisés dans les équipements électroniques - Partie 8: Spécification
intermédiaire: Condensateurs fixes à diélectrique en céramique, Classe 1
Condensateurs fixes utilisés dans les équipements électroniques - Partie 8: Spécification
intermédiaire: Condensateurs fixes à diélectrique en céramique, Classe 1
Ta slovenski standard je istoveten z: EN 60384-8:2015
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60384-8
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2015
ICS 31.060.20 Supersedes EN 60384-8:2005
English Version
Fixed capacitors for use in electronic equipment - Part 8:
Sectional specification: Fixed capacitors of ceramic dielectric,
Class 1
(IEC 60384-8:2015)
Condensateurs fixes utilisés dans les équipements Festkondensatoren zur Verwendung in Geräten der
électroniques - Partie 8: Spécification intermédiaire: Elektronik - Teil 8: Rahmenspezifikation - Keramik-
Condensateurs fixes à diélectrique en céramique, Classe 1 Festkondensatoren, Klasse 1
(IEC 60384-8:2015) (IEC 60384-8:2015)
This European Standard was approved by CENELEC on 2015-04-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60384-8:2015 E
Foreword
The text of document 40/2338/FDIS, future edition 4 of IEC 60384-8, prepared by IEC TC 40, "Capacitors
and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60384-8:2015.
The following dates are fixed:
(dop) 2016-01-14
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-04-14
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60384-8:2005.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60384-8:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60384-14 NOTE Harmonized as EN 60384-14.
IEC 60384-21 NOTE Harmonized as EN 60384-21.

- 3 - EN 60384-8:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year

IEC 60063 1963 Preferred number series for resistors and - -
capacitors
+A1 1967  - -
+A2 1977  - -
IEC 60068-1 2013 Environmental testing -- Part 1: General and EN 60068-1 2014
guidance
IEC 60384-1 2008 Fixed capacitors for use in electronic EN 60384-1 2009
equipment -- Part 1: Generic specification
IEC 61193-2 2007 Quality assessment systems -- Part 2: EN 61193-2 2007
Selection and use of sampling plans for
inspection of electronic components and
packages
ISO 3 1973 Preferred numbers; Series of preferred - -
numbers
IEC 60384-8 ®
Edition 4.0 2015-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –

Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1

Condensateurs fixes utilisés dans les équipements électroniques –

Partie 8: Spécification intermédiaire: Condensateurs fixes à diélectrique en

céramique, Classe 1
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.060.20 ISBN 978-2-8322-2283-6

– 2 – IEC 60384-8:2015 © IEC 2015
CONTENTS
FOREWORD . 6
1 General . 8
1.1 Scope . 8
1.2 Object . 8
1.3 Normative references . 8
1.4 Information to be given in a detail specification . 8
1.4.1 General . 8
1.4.2 Outline drawing and dimensions . 9
1.4.3 Mounting . 9
1.4.4 Ratings and characteristics . 9
1.4.5 Marking . 10
1.5 Terms and definitions . 10
1.6 Marking . 10
1.6.1 General . 10
1.6.2 Marking for code of temperature coefficient . 11
1.6.3 Marking on the body . 11
1.6.4 Marking of the packaging . 11
1.6.5 Additional marking . 11
2 Preferred ratings and characteristics . 11
2.1 Preferred characteristics . 11
2.2 Preferred values of ratings . 11
2.2.1 Rated temperature . 11
2.2.2 Rated voltage (U ) . 12
R
2.2.3 Category voltage (U ) . 12
C
2.2.4 Preferred values of nominal capacitance and associated tolerance
values . 12
2.2.5 Temperature coefficient (α) . 12
3 Quality assessment procedures . 16
3.1 Primary stage of manufacture . 16
3.2 Structurally similar components . 16
3.3 Certified test records of released lots . 16
3.4 Qualification approval . 16
3.4.1 General . 16
3.4.2 Qualification approval on the basis of the fixed sample size procedure . 16
3.4.3 Tests . 17
3.5 Quality conformance inspection . 22
3.5.1 Formation of inspection lots . 22
3.5.2 Test schedule . 23
3.5.3 Delayed delivery . 23
3.5.4 Assessment levels . 23
4 Test and measurement procedures . 24
4.1 General . 24
4.2 Visual examination and check of dimensions . 24
4.3 Electrical tests . 24
4.3.1 Capacitance . 24
4.3.2 Tangent of loss angle (tan δ) . 25

IEC 60384-8:2015 © IEC 2015 – 3 –
4.3.3 Insulation resistance (R ) . 25
i
4.3.4 Voltage proof . 26
4.4 Temperature coefficient (α) and temperature cyclic drift of capacitance . 27
4.4.1 General . 27
4.4.2 Preliminary drying . 27
4.4.3 Measuring conditions . 27
4.4.4 Requirements . 27
4.5 Robustness of terminations . 27
4.6 Resistance to soldering heat . 27
4.6.1 General . 27
4.6.2 Initial measurement . 27
4.6.3 Test conditions . 27
4.6.4 Final inspection, measurements and requirements. 27
4.7 Solderability . 28
4.7.1 General . 28
4.7.2 Test conditions . 28
4.7.3 Final inspection, measurements and requirements. 28
4.8 Rapid change of temperature (if required) . 28
4.8.1 General .
...