Base materials for printed circuits - Part 1: Test methods

Describes methods for testing electrical, mechanical and other properties of base materials in sheet or roll form for application in the field of printed circuits irrespective of the nature of the insulating base material.

Basismaterialien für gedruckte Schaltungen - Teil 1: Prüfverfahren

Matériaux de base pour circuits imprimés - Partie 1: Méthodes d'essai

Décrit les méthodes d'essai des propriétés électriques, mécaniques et autres des supports isolants en feuilles ou en rouleaux utilisés dans le domaine des circuits imprimés, indépendamment de la nature du support isolant de base.

Base materials for printed circuits - Part 1: Test methods

General Information

Status
Withdrawn
Publication Date
22-Aug-1993
Withdrawal Date
31-Jan-2006
Technical Committee
CLC/SR 91 - Electronics assembly technology
Drafting Committee
IEC/TC 91 - IEC_TC_91
Parallel Committee
IEC/TC 91 - IEC_TC_91
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Feb-2006
Completion Date
01-Feb-2006
Ref Project
SIST EN 60249-1:2002 - Base materials for printed circuits -- Part 1: Test methods

Relations

Refers
EN 148-1:1999 - Respiratory protective devices - Threads for facepieces - Part 1: Standard thread connection
Effective Date
09-Feb-2026
Refers
HD 323.2.3 S2:1987 - Basic environmental testing procedures - Part 2: Tests - Test Ca: Damp heat, steady state
Effective Date
03-Feb-2026
Refers
HD 429 S1:1983 - Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
Effective Date
03-Feb-2026
Refers
HD 214 S2:1980 - Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
Effective Date
03-Feb-2026
Refers
HD 323.2.20 S3:1988 - Basic environmental testing procedures - Part 2: Tests - Test T: Soldering
Effective Date
03-Feb-2026
Referred By
EN 61189-2:1997 - Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
Effective Date
03-Feb-2026
Referred By
EN 60926:1996 - Auxiliaries for lamps - Starting devices (other than glow starters) - General and safety requirements
Effective Date
03-Feb-2026
Referred By
EN 61086-2:2004 - Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
Effective Date
03-Feb-2026
Referred By
EN 61249-7-1:1995 - Materials for interconnection structures - Part 7: Sectional specification set for restraining core materials - Section 1: Copper/Invar/copper
Effective Date
03-Feb-2026
Referred By
EN 60249-2-3:1994 - Base materials for printed circuits - Part 2: Specifications - Specification No. 3: Epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test)
Effective Date
03-Feb-2026
Referred By
EN 60249-2-8:1994 - Base materials for printed circuits - Part 2: Specifications - Specification No. 8: Flexible copper-clad polyester (PETP) film
Effective Date
03-Feb-2026
Referred By
EN 61249-3-5:1999 - Materials for printed boards and other interconnecting structures - Part 3-5: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Transfer adhesive films
Effective Date
03-Feb-2026
Referred By
EN 60730-1:2000/A2:2008 - Automatic electrical controls for household and similar use - Part 1: General requirements
Effective Date
03-Feb-2026
Referred By
EN 61347-1:2001 - Lamp controlgear - Part 1: General and safety requirements
Effective Date
03-Feb-2026
Referred By
EN 60922:1997 - Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - General and safety requirements
Effective Date
03-Feb-2026

Frequently Asked Questions

EN 60249-1:1993 is a standard published by CLC. Its full title is "Base materials for printed circuits - Part 1: Test methods". This standard covers: Describes methods for testing electrical, mechanical and other properties of base materials in sheet or roll form for application in the field of printed circuits irrespective of the nature of the insulating base material.

Describes methods for testing electrical, mechanical and other properties of base materials in sheet or roll form for application in the field of printed circuits irrespective of the nature of the insulating base material.

EN 60249-1:1993 has the following relationships with other standards: It is inter standard links to EN 148-1:1999, HD 323.2.3 S2:1987, HD 429 S1:1983, HD 214 S2:1980, HD 323.2.20 S3:1988, EN 61189-2:1997, EN 60926:1996, EN 61086-2:2004, EN 61249-7-1:1995, EN 60249-2-3:1994, EN 60249-2-8:1994, EN 61249-3-5:1999, EN 60730-1:2000/A2:2008, EN 61347-1:2001, EN 60922:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 60249-1:1993 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...