EN 10305-2:2010

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 2: Geschweißte kaltgezogene RohreTubes de précision en acier - Conditions techniques de livraison - Partie 2: Tubes soudés étirés à froidSteel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 10305-2:2009SIST EN 10305-2:2010en01-marec-2010SIST EN 10305-2:2010SLOVENSKI
STANDARDSIST EN 10305-2:20031DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10305-2
January 2010 ICS 77.140.75 Supersedes EN 10305-2:2002English Version
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
Tubes de précision en acier - Conditions techniques de livraison - Partie 2: Tubes soudés étirés à froid
Präzisionsstahlrohre - Technische Lieferbedingungen -Teil 2: Geschweißte kaltgezogene Rohre This European Standard was approved by CEN on 22 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10305-2:2010: ESIST EN 10305-2:2010

1) Under revision to become EN ISO 10893-1, Non-destructive testing of steel tubes
Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leak-tightness instead of the hydrostatic test (ISO/DIS 10893-1:2009). 2) Under revision to become EN ISO 10893-2, Non-destructive testing of steel tubes
Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO/DIS 10893-2:2009). 3) Under revision to become EN ISO 10893-3, Non-destructive testing of steel tubes
Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transversal imperfections (ISO/DIS 10893-3:2009). SIST EN 10305-2:2010

(ISO 6892-1:2009) EN ISO 8492, Metallic materials — Tube — Flattening test (ISO 8492:1998) EN ISO 8493, Metallic materials — Tube — Drift expanding test (ISO 8493:1998) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 10020:2000, EN 10021:2006,
EN 10052:1993, EN 10266:2003 and the following apply. 3.1 employer organization for which a person works on a regular basis NOTE The employer can be either the tube manufacturer or a third party organization providing non-destructive testing (NDT) services. 3.2 manufacturer party to produce and to deliver tubes in accordance with this document NOTE Where tubes are delivered by a supplier, see EN 10021:2006, Clause 6. 3.3 imperfection discontinuity in the wall or on the pipe surfaces detectable by methods described in this document NOTE Imperfections with a size complying with the acceptance criteria specified in this document are considered to have no practical implicatio
...