Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments

This Part of this European Standard specifies a method of measuring the total and diffuse luminous reflectance characteristics of aluminium surfaces, using integrating-sphere instruments. The method described is applicable also to the measurement of specular reflectance (principal gloss value), specularity, and diffuseness. The method is unsuitable for use with lighting reflectors.

Aluminium und Aluminiumlegierungen - Anodisieren - Teil 12: Messung der Reflexionseigenschaften von Aluminiumoberflächen mit Hilfe Ulbrichtscher Kugeln

Dieser Teil dieser Europäischen Norm legt ein Verfahren zur Bestimmung des Reflexionsvermögens von Aluminiumoberflächen fest. indem der gesamte und diffuse Lichtreflexionsgrad mit Ulbrichtschen Kugeln gemessen wird. Das beschriebene Verfahren ist ebenso zur Messung des gerichteten Reflexionsgrades (Hauptglanzwert), der gerichteten ist auf Reflektoren nicht anwendbar. Das Verfahren ist auf Reflektoren nicht anwendbar.

Aluminium et alliages d'aluminium - Anodisation - Partie 12: Mesurage des caractéristiques de réflectivité des surfaces d'aluminium à l'aide d'instruments intégrateurs sphériques

Cette partie de la présente Norme européenne spécifie une méthode de mesurage des caractéristiques de réflectivité lumineuse totale et diffuse des surfaces d'aluminium à l'aide d'instruments intégrateurs sphériques. La méthode décrite est également applicable au mesurage de la réflectivité spéculaire (valeur de brillance principale), de la réflectivité totale et de la réflectivité diffuse. La méthode n'est pas utilisable pour les réflecteurs lumineux.

Aluminij in aluminijeve zlitine - Anodizacija - 12. del: Merjenje značilnic odbojnosti aluminijevih površin z napravami z integriranimi kroglicami

General Information

Status
Withdrawn
Publication Date
22-Aug-2000
Withdrawal Date
14-Oct-2010
ICS
25.220.20 - Surface treatment
 
77.120.10 - Aluminium and aluminium alloys
Technical Committee
CEN/TC 132 - Aluminium and aluminium alloys
Drafting Committee
CEN/TC 132/WG 15 - Aluminium anodisation
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Oct-2010
Completion Date
15-Oct-2010
Ref Project
SIST EN 12373-12:2002 - Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments

Relations

Replaced By
EN ISO 6719:2010 - Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010)
Effective Date
23-Oct-2010

Get Certified

Connect with accredited certification bodies for this standard

National Aerospace and Defense Contractors Accreditation Program (NADCAP)

Global cooperative program for special process quality in aerospace.

ANAB United States Verified
Visit Website

CARES (UK Certification Authority for Reinforcing Steels)

UK certification for reinforcing steels and construction.

UKAS United Kingdom Verified
Visit Website

DVS-ZERT GmbH

German welding certification society.

DAKKS Germany Verified
Visit Website

Sponsored listings

Frequently Asked Questions

EN 12373-12:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments". This standard covers: This Part of this European Standard specifies a method of measuring the total and diffuse luminous reflectance characteristics of aluminium surfaces, using integrating-sphere instruments. The method described is applicable also to the measurement of specular reflectance (principal gloss value), specularity, and diffuseness. The method is unsuitable for use with lighting reflectors.

This Part of this European Standard specifies a method of measuring the total and diffuse luminous reflectance characteristics of aluminium surfaces, using integrating-sphere instruments. The method described is applicable also to the measurement of specular reflectance (principal gloss value), specularity, and diffuseness. The method is unsuitable for use with lighting reflectors.

EN 12373-12:2000 is classified under the following ICS (International Classification for Standards) categories: 25.220.20 - Surface treatment; 77.120.10 - Aluminium and aluminium alloys. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 12373-12:2000 has the following relationships with other standards: It is inter standard links to EN ISO 6719:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 12373-12:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Anodisieren - Teil 12: Messung der Reflexionseigenschaften von Aluminiumoberflächen mit Hilfe Ulbrichtscher KugelnAluminium et alliages d'aluminium - Anodisation - Partie 12: Mesurage des caractéristiques de réflectivité des surfaces d'aluminium a l'aide d'instruments intégrateurs sphériquesAluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...