EN 13986:2002
(Main)Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
This European Standard defines wood-based panels and specifies the relevant characteristics and the appropriate test methods to determine these characteristics. It provides provisions for the evaluation of conformity and the requirement for marking these products.
Holzwerkstoffe zur Verwendung im Bauwesen - Eigenschaften, Bewertung der Konformität und Kennzeichnung
Panneaux à base de bois destinés à la construction - Caractéristiques, évaluation de conformité et marquage
La présente Norme européenne définit les panneaux à base de bois pour usage dans la construction et prescrit les caractéristiques pertinentes et méthodes d'essais appropriées afin de déterminer les caractéristiques des panneaux à base de bois, bruts, recouverts, plaqués ou revêtus :
· pour usage intérieur en milieu sec ) en tant que composants structurels ;
· pour usage intérieur en milieu humide ) (ou en extérieur protégé) en tant que composants structurels ;
· pour usage extérieur ) en tant que composants structurels ;
· pour un usage intérieur en milieu sec1) en tant que composants non structurels ;
· pour usage intérieur en milieu humide2) (ou en extérieur protégé) en tant que composants non structurels ;
· pour usage extérieur3) en tant que composants non structurels ;
· pour usage intérieur en milieu sec1) ou humide2) en tant que platelage de plancher structurel sur solives ;
· pour usage intérieur en milieu sec1) ou humide2) en tant que platelage de toiture structurel sur poutres ;
· pour usage intérieur en milieu sec1) ou humide2) en tant que paroi de mur structurel sur poteaux.
La norme prévoit l'évaluation de la conformité et les exigences de marquage de ces produits.
Cette norme s'applique aux panneaux à base de bois sous forme de bois panneautés, lamibois ), contreplaqué, OSB, et de panneaux de particules, soit des panneaux de particules liés au ciment ou à la résine et des panneaux de fibres obtenus par procédé humide (panneaux durs, panneaux mi-durs, panneaux isolants) et panneaux de fibres obtenus par procédé à sec (MDF) destinés à la construction. Ils peuvent contenir des agents chimiques en vue d'améliorer leur réaction au feu et résister aux attaques biologiques, par exemple celles des champignons et des insectes.
Cette norme n'est pas applicable aux panneaux à base de bois destinés à des usages autres que la construction.
Lesne plošče za uporabo v gradbeništvu - Lastnosti, ocenjevanje skladnosti in označevanje
General Information
- Status
- Withdrawn
- Publication Date
- 18-Jun-2002
- Withdrawal Date
- 26-Oct-2004
- Technical Committee
- CEN/TC 112 - Woodbased panels
- Drafting Committee
- CEN/TC 112 - Woodbased panels
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 27-Oct-2004
- Completion Date
- 27-Oct-2004
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Building products evaluation and certification.
QAI Laboratories
Building and construction product testing and certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 13986:2002 is a standard published by the European Committee for Standardization (CEN). Its full title is "Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking". This standard covers: This European Standard defines wood-based panels and specifies the relevant characteristics and the appropriate test methods to determine these characteristics. It provides provisions for the evaluation of conformity and the requirement for marking these products.
This European Standard defines wood-based panels and specifies the relevant characteristics and the appropriate test methods to determine these characteristics. It provides provisions for the evaluation of conformity and the requirement for marking these products.
EN 13986:2002 is classified under the following ICS (International Classification for Standards) categories: 01.040.79 - Wood technology (Vocabularies); 01.040.91 - Construction materials and building (Vocabularies); 79.060.01 - Wood-based panels in general; 91.080.20 - Timber structures. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13986:2002 has the following relationships with other standards: It is inter standard links to EN 13986:2004, EN 622-2:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13986:2002 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/113. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13986:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.R]QDþHYDQMHHolzwerkstoffe zur Verwendung im Bauwesen - Eigenschaften, Bewertung der Konformität und KennzeichnungPanneaux a base de bois destinés a la construction - Caractéristiques, évaluation de conformité et marquageWood-based panels for use in construction - Characteristics, evaluation of conformity and marking79.060.01Wood-based panels in generalICS:Ta slovenski standard je istoveten z:EN 13986:2002SIST EN 13986:2003en01-april-2003SIST EN 13986:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13986June 2002ICS 01.040.79; 01.040.91; 79.060.01; 91.080.20English versionWood-based panels for use in construction - Characteristics,evaluation of conformity and markingPanneaux à base de bois destinés à la construction -Caractéristiques, évaluation de conformité et marquageHolzwerkstoffe zur Verwendung im Bauwesen -Eigenschaften, Bewertung der Konformität undKennzeichnungThis European Standard was approved by CEN on 7 April 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13986:2002 ESIST EN 13986:2003
Technical classes for wood-based panels.32Annex B (normative)
Formaldehyde classes.35Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.37ZA.1Scope and relevant characteristics.37ZA.2Procedure for the attestation of conformity of wood-based panels.37ZA.3CE marking.39ZA.4Certificate and Declaration of Conformity.45Bibliography.46SIST EN 13986:2003
1)Dry conditions are defined in 3.8.2. Boards of this type are suitable for use in biological hazard class 1 of EN 335-3.2)Humid conditions are defined in 3.8.3. Boards of this type are suitable for use in biological hazard classes 1 and 2 ofEN 335-3.3)External conditions are defined in 3.8.4. Boards of this type are suitable for use in biological hazard classes 1, 2, 3 and 4 ofEN 335-3.4)Standards for LVL are under development. LVL panels will not be covered by this standard until the product standard ispublished.SIST EN 13986:2003
5)To be publishedSIST EN 13986:2003
1Bending strength5.1
2Bending stiffness(Modulus of Elasticity)5.2
3Bonding quality5.3—
4Internal bond(Tensile strength)—5.4
5Durability (Swelling inthickness)—5.5
6Release offormaldehyde5.7
7Reaction to fire5.8
8Water vapourpermeability5.9
9Airborne soundinsulation5.1010Sound absorption5.1111Thermal conductivity5.1212Strength and stiffnessfor structural use5.1313Mechanical durability5.1614Biological durability5.1715Content ofpentachlorophenol5.18SIST EN 13986:2003
1Bending strength5.1
2Bending stiffness(Modulus of Elasticity)5.2
3Bonding quality5.3—
4Internal bond(Tensile strength)—5.4
5Durability (Swelling inthickness)—5.5
6Durability(Moisture resistance)5.6.55.6.15.6.25.6.35.6.4
7Release offormaldehyde5.7
8Reaction to fire5.8
9Water vapourpermeability5.910Airborne soundinsulation5.1011Sound absorption5.1112Thermal conductivity5.1213Strength and stiffnessfor structural use5.1314Mechanical durability5.1615Biological durability5.1716Content ofpentachlorophenol5.18aIn these climatic conditions, the use of high density medium boards (MBH) and of dry process fibreboards (MDF) forstructural components is restricted to instantaneous or short-term load durations only.SIST EN 13986:2003
1Bending strength5.1
2Bending stiffness(Modulus
of elasticity)5.2
3Bonding quality5.3—
4Internal bond(Tensile strength)—5.4
5Durability (Swelling inthickness)—5.5
6Durability(Moisture resistance)5.6.55.6.3
7Reaction to fire5.8
8Water vapourpermeability5.9
9Airborne sound insulation5.1010Thermal conductivity5.1211Strength and stiffnessfor structural use5.1312Mechanical durability5.1613Biological durability5.1714Content ofpentachlorophenol5.18These wood-based panels should be used out of direct contact with the ground, soil or water.SIST EN 13986:2003
1Durability againstageing(Bending strength)—5.1
2Bonding quality5.3—
3Internal bond(Tensile strength)—5.4
4Release offormaldehyde5.7
5Reaction to fire5.8
6Water vapourpermeability5.9
7Airborne soundinsulation5.10
8Sound absorption5.11
9Thermal conductivity5.1210Biological durability5.1711Content ofpentachlorophenol5.18SIST EN 13986:2003
1Durability againstageing(Bending strength)—5.1
2Bonding quality5.3—
3Internal bond(Tensile strength)—5.4
4Durability (Swelling inthickness)—5.5
5Durability(Moisture resistance)5.6.55.6.15.6.25.6.35.6.4
6Release offormaldehyde5.7
7Reaction to fire5.8
8Water vapourpermeability5.9
9Airborne soundinsulation5.1010Sound absorption5.1111Thermal conductivity5.1212Biological durability5.1713Content ofpentachlorophenol5.18SIST EN 13986:2003
1Durability against ageing(Bending strength)—5.1
2Bonding quality5.3—
3Internal bond(Tensile strength)—5.4
4Durability(Moisture resistance)5.6.55.6.35.6.4
5Reaction to fire5.8
6Water vapourpermeability5.9
7Airborne soundinsulation5.10
8Thermal conductivity5.12
9Biological durability5.1710Content ofpentachlorophenol5.18aThese wood-based panels should be used out of direct contact with the ground, soil or water.bThese wood-based panels may only be used in exterior conditions if a treatment of proven exterior durability (coating orotherwise) has been applied to the relevant surfaces and edges.SIST EN 13986:2003
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...