iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 752-3:1996

(Main)

Drain and sewer systems outside buildings - Part 3: Planning

Drain and sewer systems outside buildings - Part 3: Planning

This European Standard is applicable to drain and sewer systems, which operate essentially under gravity, from the point where the sewage leaves a building or roof drainage system, or enters a road gully, to the point where it is discharged into a treatment works or receiving water.

Entwässerungssysteme außerhalb von Gebäuden - Teil 3: Planung

Diese Europäische Norm gilt für Entwässerungssysteme, welche hauptsächlich als Freispiegelsysteme betrieben werden. Sie gilt von dem Punkt an, wo das Abwasser das Gebäude bzw. die Dachentwässerung verläßt oder in einen Straßenablauf fließt, bis zu dem Punkt, wo das Abwasser in eine Behandlungsanlage oder einen Vorfluter eingeleitet wird.

Réseaux d'évacuation et d'assainissement à l'extérieur des bâtiments - Partie 3: Etablissement de l'avant-projet

La présente norme européenne est applicable aux réseaux d'évacuation et d'assainissement qui fonctionnent principalement à écoulement libre, depuis le point où l'effluent quitte le bâtiment ou le système d'évacuation de la toiture ou atteint un caniveau de chaussée, jusqu'au point où il est déversé dans une usine d'épuration ou le milieu récepteur.

Sistemi za odvod odpadne vode in kanalizacijo zunaj zgradb - 3. del: Projektiranje

General Information

Status
Withdrawn
Publication Date
23-Jul-1996
Withdrawal Date
22-Jan-2008
ICS
13.060.30 - Sewage water
23.040.05 - Pipeline and its parts for external sewage systems
93.030 - External sewage systems
Technical Committee
CEN/TC 165 - Waste water engineering
Drafting Committee
CEN/TC 165/WG 22 - Drainage outside buildings
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
23-Jan-2008
Completion Date
23-Jan-2008
Directive
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
SIST EN 752-3:1996 - Drain and sewer systems outside buildings - Part 3: Planning

Relations

Replaced By
EN 752:2008 - Drain and sewer systems outside buildings
Effective Date
22-Dec-2008

Buy Standard

EN 752-3:1996EN 752-3:1996
PreviousNext
Standard
EN 752-3:1996
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 752-3:1996
01-december-1996
Sistemi za odvod odpadne vode in kanalizacijo zunaj zgradb - 3. del: Projektiranje
Drain and sewer systems outside buildings - Part 3: Planning
Entwässerungssysteme außerhalb von Gebäuden - Teil 3: Planung
Réseaux d'évacuation et d'assainissement a l'extérieur des bâtiments - Partie 3:
Etablissement de l'avant-projet
Ta slovenski standard je istoveten z: EN 752-3:1996
ICS:
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
SIST EN 752-3:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 752-3:1996

---------------------- Page: 2 ----------------------

SIST EN 752-3:1996

---------------------- Page: 3 ----------------------

SIST EN 752-3:1996

---------------------- Page: 4 ----------------------

SIST EN 752-3:1996

---------------------- Page: 5 ----------------------

SIST EN 752-3:1996

---------------------- Page: 6 ----------------------

SIST EN 752-3:1996

---------------------- Page: 7 ----------------------

SIST EN 752-3:1996

---------------------- Page: 8 -----
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 3581:2023(Main)
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2023)
SIST EN ISO 3581:2023

This document specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels.
This document is a combined standard providing for classification utilizing a system based upon classification according to nominal composition or utilizing a system based upon classification according to alloy type.
a)       Paragraphs and tables which carry the label “classification according to nominal composition-A” or “ISO 3581-A” are applicable only to products classified to that system.
b)       Paragraphs and tables which carry the label “classification according to alloy type-B” or “ISO 3581-B” are applicable only to products classified to that system.
c)        Paragraphs and tables which carry neither label are applicable to products classified according to either or both systems.
Annex B gives information on considerations on weld metal ferrite content.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11363-1:2018/A1:2023(Amendment)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
SIST EN ISO 11363-1:2018/A1:2023
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4880:2023(Main)
Aerospace series - General technical specification for standard parts
kSIST FprEN 4880:2022
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18743:2015/A1:2023(Amendment)
Microbiology of the food chain - Detection of Trichinella larvae in meat by artificial digestion method - Amendment 1: Method validation studies and performance characteristics (ISO 18743:2015/Amd 1:2023)
SIST EN ISO 18743:2015/A1:2023
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52924:2023(Main)
Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
SIST EN ISO/ASTM 52924:2023

This document establishes the required or the achievable classes of part properties for additive manufactured polymer parts in order to get a common understanding on part quality. It is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of part properties with the aid of this document. The classification is based on mechanical, physical and geometrical properties. Further properties can be defined between buyer and provider of manufacturing.
This document is applicable to parts that have been manufactured from a thermoplastic polymer by means of thermal reaction fusion of material typically applied by a powder bed fusion (PBF) or material extrusion (MEX) processes. This document is also applicable to thermoplastic parts made by other processes, provided that due consideration is given to process-specific topics.
The classification of part properties applies to parts in as-built condition, that have been unpacked from the build space, with all support structures removed, but prior to any post-processing operations.
Specific industries (e.g. aerospace and medical) typically specify additional requirements.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11267:2023(Main)
Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants (ISO 11267:2023)
SIST EN ISO 11267:2023

This document specifies one of the methods for evaluating the habitat function of soils and determining effects of soil contaminants and substances on the reproduction of Folsomia candida Willem by dermal and alimentary uptake. This document also provides information on how to use this method for testing substances under temperate conditions.
The chronic test described is applicable to soils and soil materials of unknown quality, e.g. from contaminated sites, amended soils, soils after remediation, industrial, agricultural or other sites of concern and waste materials.
The method is not applicable to volatile substances, i.e. substances for which H (Henry's constant) or the air/water partition coefficient is greater than 1, or for which the vapour pressure exceeds 300 Pa at 25 °C.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19111:2020/A2:2023(Amendment)
Geographic information - Referencing by coordinates - Amendment 2 (ISO 19111:2019/Amd 2:2023)
SIST EN ISO 19111:2020/oprA2:2023
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12341:2023(Main)
Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
SIST EN 12341:2023

This European Standard describes a standard method for determining the PM10 or PM2,5 mass concentrations of suspendedparticulate matter in ambient air by sampling the particulate matter on filters and weighing them by means of a balance.
Measurements are performed with samplers with inlet designs as specified in Annex A, operating at a nominal flow rate of 2,3 m3/h,over a nominal sampling period of 24 h. Measurement results are expressed in μg/m3, where the volume of air is the volume atambient conditions near the inlet at the time of sampling.
The range of application of this European Standard is for 24 h measurements from approximately 1 μg/m3 (i.e. the limit of detection ofthe standard measurement method expressed as its uncertainty) up to 150 μg/m3 for PM10 and 120 μg/m3 for PM2,5.
This European Standard describes procedures and gives requirements for the testing and use of so-called sequential samplers,equipped with a filter changer, suitable for extended stand-alone operation. Sequential samplers are commonly used throughout theEuropean Union for the measurement of concentrations in ambient air of PM10 or PM2,5. However, this European Standard does notexclude the use of single-filter samplers.
This European Standard represents an evolution of earlier European Standards (EN 12341:1998 and 2014, EN 14907:2005). Newequipment procured shall comply fully with this European Standard.
Older versions of these samplers, including those described in EN 12341:2014 Annex B, have a special status in terms of their use. These samplers can still be used for monitoring purposes and for ongoing quality control, provided that a well justified additionalallowance is made to their uncertainties
This European Standard also provides guidance for the selection and testing of filters with the aim of reducing the measurementuncertainty of the results obtained when applying this European Standard.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 45001:2023(Main)
Occupational health and safety management systems - Requirements with guidance for use (ISO 45001:2018)
SIST EN ISO 45001:2023
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23537-2:2023(Main)
Requirements for sleeping bags - Part 2: Fabric and material properties (ISO 23537-2:2023)
kSIST FprEN ISO 23537-2:2023

This document specifies the fabric and material properties as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities.
This document does not apply to sleeping bags intended for specific purposes such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day