EN 13523-10:2010
(Main)Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
This European Standard specifies the basic principles and procedure for determining the resistance of an organic coating on a metallic substrate (coil coating) to a combination of fluorescent UV radiation, and water condensation and temperature under controlled conditions.
Due to varied conditions which occur during natural weathering and the extreme nature of accelerated testing, correlation between the two cannot be expected.
Not all organic coatings will perform on an equal basis but a degree of correlation between the same generic type might be observed.
Bandbeschichtete Metalle - Prüfverfahren - Teil 10: Beständigkeit gegen UV-Strahlung mit Leuchtstofflampen und Kondensation von Wasser
Diese Europäische Norm legt die Grundsätze und das Verfahren zum Bestimmen der Beständigkeit einer organischen Beschichtung auf einem metallischen Substrat (Bandbeschichtung) gegen eine Kombination von UV Strahlung, Kondensation von Wasser und Temperatur unter geregelten Bedingungen fest.
Wegen der vielfältigen Bedingungen, die bei der Freibewitterung auftreten können, und der extremen Art der beschleunigten Prüfung kann eine Korrelation zwischen diesen beiden nicht erwartet werden.
Nicht alle organischen Beschichtungen verhalten sich gleichartig, und ein gewisser Grad von Korrelation bei Beschichtungen desselben Grundtyps ist möglich.
Tôles prélaquées - Méthodes d'essai - Partie 10 : Résistance à un rayonnement UV fluorescent et à la condensation de l'eau
La présente partie de l’EN 13523 spécifie les principes de base et le mode opératoire à appliquer pour déterminer la résistance d’un revêtement organique appliqué sur un support métallique (prélaquage), à une combinaison d’un rayonnement UV fluorescent, de condensation d’eau et de température, dans des conditions contrôlées.
Compte tenu des diverses conditions qui règnent pendant le processus de vieillissement naturel et de la nature extrême des essais accélérés, aucune corrélation ne peut être escomptée entre les deux.
Tous les revêtements organiques ne se comporteront pas de la même manière, mais un certain degré de corrélation peut apparaître entre ceux de même type générique.
Kovine, prevlečene v svitkih - Metode preskušanja - 10. del: Odpornost proti fluorescentni ultravijolični svetlobi in kondenzaciji vode
Ta del EN 13523 opisuje osnovna načela in postopke za ugotavljanje odpornosti organskih prevlek na kovinskem substratu (prevleke v svitkih) proti kombinaciji fluorescentne UV-svetlobe, proti kondenzaciji vode in temperaturi v nadzorovanih pogojih.
Zaradi spremenljivih pogojev, do katerih prihaja med naravnim preperevanjem, in ekstremne narave pospešenega preskušanja korelacije med njima ni mogoče pričakovati.
Vse organske prevleke niso enako učinkovite, vendar je v okviru iste generične vrste mogoče opaziti določeno stopnjo korelacije.
General Information
- Status
- Withdrawn
- Publication Date
- 23-Mar-2010
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 139 - Paints and varnishes
- Drafting Committee
- CEN/TC 139/WG 9 - Testing of coil coated metals
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 22-Feb-2017
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 27-Mar-2010
- Effective Date
- 01-Mar-2017
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 13523-10:2010 is a standard published by the European Committee for Standardization (CEN). Its full title is "Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation". This standard covers: This European Standard specifies the basic principles and procedure for determining the resistance of an organic coating on a metallic substrate (coil coating) to a combination of fluorescent UV radiation, and water condensation and temperature under controlled conditions. Due to varied conditions which occur during natural weathering and the extreme nature of accelerated testing, correlation between the two cannot be expected. Not all organic coatings will perform on an equal basis but a degree of correlation between the same generic type might be observed.
This European Standard specifies the basic principles and procedure for determining the resistance of an organic coating on a metallic substrate (coil coating) to a combination of fluorescent UV radiation, and water condensation and temperature under controlled conditions. Due to varied conditions which occur during natural weathering and the extreme nature of accelerated testing, correlation between the two cannot be expected. Not all organic coatings will perform on an equal basis but a degree of correlation between the same generic type might be observed.
EN 13523-10:2010 is classified under the following ICS (International Classification for Standards) categories: 17.180.20 - Colours and measurement of light; 25.220.60 - Organic coatings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13523-10:2010 has the following relationships with other standards: It is inter standard links to EN 13523-10:2001, EN 13523-10:2017, EN 13523-14:2023, EN 13523-22:2024, EN ISO 16474-1:2013, EN 13523-3:2024, EN 13523-0:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13523-10:2010 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bandbeschichtete Metalle - Prüfverfahren - Teil 10: Beständigkeit gegen UV-Strahlung mit Leuchtstofflampen und Kondensation von WasserTôles prélaquées - Méthodes d'essai - Partie 10 : Résistance à un rayonnement UV fluorescent et à la condensation de l'eauCoil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation25.220.60Organske prevlekeOrganic coatings17.180.20Barve in merjenje svetlobeColours and measurement of lightICS:Ta slovenski standard je istoveten z:EN 13523-10:2010SIST EN 13523-10:2011en,fr,de01-november-2011SIST EN 13523-10:2011SLOVENSKI
STANDARDSIST EN 13523-10:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13523-10
March 2010 ICS 25.220.60 Supersedes EN 13523-10:2001English Version
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
Tôles prélaquées - Méthodes d'essai - Partie 10 : Résistance à un rayonnement UV fluorescent et à la condensation de l'eau
Bandbeschichtete Metalle - Prüfverfahren - Teil 10: Beständigkeit gegen UV-Strahlung mit Leuchtstofflampen und Kondensation von Wasser This European Standard was approved by CEN on 20 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13523-10:2010: ESIST EN 13523-10:2011
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...