EN 13523-10:2001
(Main)Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV light and water condensation
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV light and water condensation
This part of EN 13523 describes the basic principal and procedure for determining the resistance of an organic coating on a metallic substrate to a combination of fluorescent UV light and water condensation. Due to varied conditions which occur during natural weathering and the extreme nature of accelerated testing, correlation between the two cannot be expected. Not all organic coatings will perform on an equal basis but a degree of correlation between the same generic type may be observed.
Bandbeschichtete Metalle - Prüfverfahren - Teil 10: Beständigkeit gegen fluoreszierende UV-Strahlung und Kondensation von Wasser
Dieser Teil von EN 13523 beschreibt die Grundsätze und das Verfahren zum Bestimmen der Beständigkeit einer organischen Beschichtung auf einem metallischen Substrat gegen eine Kombination von UV-Strahlung und Kondensation von Wasser. Wegen der vielfältigen Bedingungen, die bei der Freibewitterung auftreten können, und der extremen Art der beschleunigten Prüfung kann eine Korrelation zwischen diesen beiden nicht erwartet werden. Nicht alle organischen Beschichtungen verhalten sich gleichartig, und ein gewisser Grad von Korrelation bei Beschichtungen desselben Grundtyps ist möglich.
Tôles prélaquées - Méthodes d'essai - Partie 10: Résistance aux UV fluorescentes et à la condensation de l'eau
La présente partie de l'EN 13523 décrit les principes de base et la méthode de détermination de la résistance d'une peinture organique, sur un support métallique, à une combinaison d'UV florescentes et de condensation d'eau. Compte tenu des diverses conditions qui règnent pendent le processus de vieillissement naturel et de la nature extrême des essais accélérés, on ne peut pas escompter de corrélation entre les deux. Toutes les peintures organiques ne se comporteront pas de la même manière, mais on pourra observer un certain degré de corrélation entre celles de même type générique.
Kovine, zaščitene po postopku coil-coating - Metode preskušanja - 10. del: Odpornost proti fluorescentni ultravijolični svetlobi in kondenzaciji vode
General Information
- Status
- Withdrawn
- Publication Date
- 23-Jan-2001
- Withdrawal Date
- 23-Mar-2010
- Technical Committee
- CEN/TC 139 - Paints and varnishes
- Drafting Committee
- CEN/TC 139/WG 9 - Testing of coil coated metals
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 24-Mar-2010
- Completion Date
- 24-Mar-2010
Relations
- Effective Date
- 27-Mar-2010
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
BSMI (Bureau of Standards, Metrology and Inspection)
Taiwan's standards and inspection authority.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
Sponsored listings
Frequently Asked Questions
EN 13523-10:2001 is a standard published by the European Committee for Standardization (CEN). Its full title is "Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV light and water condensation". This standard covers: This part of EN 13523 describes the basic principal and procedure for determining the resistance of an organic coating on a metallic substrate to a combination of fluorescent UV light and water condensation. Due to varied conditions which occur during natural weathering and the extreme nature of accelerated testing, correlation between the two cannot be expected. Not all organic coatings will perform on an equal basis but a degree of correlation between the same generic type may be observed.
This part of EN 13523 describes the basic principal and procedure for determining the resistance of an organic coating on a metallic substrate to a combination of fluorescent UV light and water condensation. Due to varied conditions which occur during natural weathering and the extreme nature of accelerated testing, correlation between the two cannot be expected. Not all organic coatings will perform on an equal basis but a degree of correlation between the same generic type may be observed.
EN 13523-10:2001 is classified under the following ICS (International Classification for Standards) categories: 17.180.20 - Colours and measurement of light; 25.220.60 - Organic coatings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13523-10:2001 has the following relationships with other standards: It is inter standard links to EN 13523-10:2010, EN 13523-14:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13523-10:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bandbeschichtete Metalle - Prüfverfahren - Teil 10: Beständigkeit gegen fluoreszierende UV-Strahlung und Kondensation von WasserTôles prélaquées - Méthodes d'essai - Partie 10: Résistance aux UV fluorescentes et a la condensation de l'eauCoil coated metals - Test methods - Part 10: Resistance to fluorescent UV l
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...