EN ISO 12216:2022
(Main)Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2020)
Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2020)
This document specifies technical requirements and test methods for windows, portlights, hatches, deadlights and doors on small craft with a length of hull, LH, as defined in ISO 8666:2016, of up to 24 m. It takes into account the type of craft, its design category, and the location of the appliance.
The appliances considered in this document are only those that are critical for the craft's watertightness.
Openings and non-opening devices fitted below area I (see 3.5.2) are excluded from the scope of this document.
Kleine Wasserfahrzeuge - Fenster, Bullaugen, Luken, Seeschlagblenden und Türen - Anforderungen an die Festigkeit und Wasserdichtheit (ISO 12216:2020)
Dieses Dokument legt unter Berücksichtigung der Fahrzeugart, der Auslegungskategorie und des Einbau¬bereiches der Vorrichtungen technische Anforderungen und Prüfverfahren für Fenster, Bullaugen, Luken, Seeschlagblenden und Türen auf kleinen Wasserfahrzeugen mit Rumpflängen LH bis 24 m, wie in ISO 8666:2016 festgelegt, fest.
Dieses Dokument gilt nur für die Vorrichtungen, die für die Wasserdichtheit des Fahrzeuges kritisch sind.
Öffnungen und nichtöffnende Einrichtungen, die unterhalb des Bereichs I angebracht sind (siehe 3.5.2), fallen nicht in den Anwendungsbereich dieses Dokuments.
Petits navires - Fenêtres, hublots, panneaux, tapes et portes - Exigences de résistance et d'étanchéité (ISO 12216:2020)
Le présent document spécifie les exigences techniques et les méthodes d'essai pour les fenêtres, hublots, panneaux, tapes et portes sur les petits navires d'une longueur de coque LH, comme définie dans l'ISO 8666:2016, inférieure ou égale à 24 m. Il prend en compte le type de bateau, sa catégorie de conception et l'emplacement de l'équipement.
Les équipements pris en compte dans le présent document sont uniquement ceux qui sont critiques pour l'étanchéité du bateau.
Les dispositifs ouvrants et non-ouvrants installées en dessous de la zone I (voir le 3.5.2) sont exclus du domaine d'application du présent document.
Mala plovila - Okna, lopute, pokrovi in vrata - Zahteve za trdnost in odpornost proti vodi (ISO 12216:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 12216:2022
01-december-2022
Nadomešča:
SIST EN ISO 12216:2018
Mala plovila - Okna, lopute, pokrovi in vrata - Zahteve za trdnost in odpornost proti
vodi (ISO 12216:2020)
Small craft - Windows, portlights, hatches, deadlights and doors - Strength and
watertightness requirements (ISO 12216:2020)
Kleine Wasserfahrzeuge - Fenster, Bullaugen, Luken, Seeschlagblenden und Türen -
Anforderungen an die Festigkeit und Wasserdichtheit (ISO 12216:2020)
Petits navires - Fenêtres, hublots, panneaux, tapes et portes - Exigences de résistance
et d'étanchéité (ISO 12216:2020)
Ta slovenski standard je istoveten z: EN ISO 12216:2022
ICS:
47.080 Čolni Small craft
91.060.50 Vrata in okna Doors and windows
SIST EN ISO 12216:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 12216:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 12216:2022
EN ISO 12216
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2022
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 12216:2018
English Version
Small craft - Windows, portlights, hatches, deadlights and
doors - Strength and watertightness requirements (ISO
12216:2020)
Petits navires - Fenêtres, hublots, panneaux, tapes et Kleine Wasserfahrzeuge - Fenster, Bullaugen, Luken,
portes - Exigences de résistance et d'étanchéité (ISO Seeschlagblenden und Türen - Anforderungen an die
12216:2020) Festigkeit und Wasserdichtheit (ISO 12216:2020)
This European Standard was approved by CEN on 6 June 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12216:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12216:2022
EN ISO 12216:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 12216:2022
EN ISO 12216:2022 (E)
European foreword
The text of ISO 12216:2020 has been prepared by Technical Committee ISO/TC 188 "Small craft” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 12216:2022 by
Technical Committee CEN/TC 464 “Small Craft” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2023, and conflicting national standards shall be
withdrawn at the latest by April 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12216:2018.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is included
in EN ISO 12216:2022/A1:2022.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.