EN 15016-1:2004
(Main)Technical drawings - Railway applications - Part 1: General Principles
Technical drawings - Railway applications - Part 1: General Principles
This European Standard lays down requirements for the preparation, administration and reproduction of technical drawings for railway applications. It complies with the requirements of EN, ISO or IEC Standards for technical drawings. It applies to technical drawings for railways, irrespective of technology i.e. mechanical, pneumatic, hydraulic, electronic etc.
The European Standard applies throughout the total life span of the drawings. It applies to all the railway organizations and parties concerned with technical drawings, and to suppliers preparing drawings for railway applications. This standard does not apply to the technical contents of the document. Neither does the standard apply to building documentation.
Technische Zeichnungen - Bahnanwendungen - Teil 1: Allgemeine Grundsätze
Diese Europäische Norm legt die Anforderungen für die Anfertigung, Verwaltung und Reproduktion von technischen Zeichnungen für Bahnanwendungen fest. Sie steht in Übereinstimmung mit den Anforderungen von EN-, ISO- bzw. IEC-Normen für technische Zeichnungen und gilt für technische Zeichnungen für Bahnanwendungen unabhängig von der angewandten, d. h. mechanischen, pneumatischen, hydraulischen, elektronischen oder sonstigen Technik.
Diese Europäische Norm gilt für die gesamte Nutzungsdauer der Zeichnungen und betrifft alle Bahnorganisationen und beteiligten Kreise, die mit technischen Zeichnungen befasst sind, sowie Zulieferer, die Zeichnungen für Bahnanwendungen anfertigen. Sie gilt nicht für den technischen Inhalt der Dokumente und nicht für Dokumente von baulichen Anlagen.
Dessins techniques - Applications ferroviaires - Partie 1: Principes généraux
La présente Norme européenne prescrit des exigences d'exécution, de gestion et de reproduction des dessins techniques destinés à des applications ferroviaires. Elle se conforme aux exigences des normes EN, ISO ou CEI relatives aux dessins techniques. Elle s'applique aux dessins techniques pour le ferroviaire, indépendamment de la technologie, qu'elle soit mécanique, pneumatique, hydraulique, électronique etc.
La Norme européenne s'applique pendant toute la durée de vie des dessins. Elle s'applique à toutes les organisations ferroviaires et à toutes les parties concernées par les dessins techniques, et aux fournisseurs qui exécutent les dessins pour les applications ferroviaires. Elle ne s'applique pas aux contenus techniques du document. Elle ne s'applique pas non plus à la documentation du bâtiment.
Tehnično risanje – Železniške naprave – 1. del: Osnovna načela
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Technische Zeichnungen - Bahnanwendungen - Teil 1: Allgemeine GrundsätzeDessins techniques - Applications ferroviaires - Partie 1: Principes générauxTechnical drawings - Railway applications - Part 1: General Principles45.020Železniška tehnika na splošnoRailway engineering in general01.100.01Technical drawings in generalICS:Ta slovenski standard je istoveten z:EN 15016-1:2004SIST EN 15016-1:2004en01-november-2004SIST EN 15016-1:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15016-1June 2004ICS 01.100.01English versionTechnical drawings - Railway applications - Part 1: GeneralPrinciplesDessins techniques - Applications ferroviaires - Partie 1:Principes générauxTechnische Zeichnungen - Bahnanwendungen - Teil 1:Allgemeine GrundsätzeThis European Standard was approved by CEN on 9 January 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15016-1:2004: ESIST EN 15016-1:2004
Title block.11 Annex B (normative)
Complete title block with dimensions for the recommended and informative parts.18 Bibliography.20
latest by December 2004. This document has been prepared under a mandate (M024) given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). This document has been prepared under Mode 4 co-operation with CENELEC TC9X. In the event of an amendment being required to this standard, the co-op TC will be consulted before proceeding to amend this document. Particular considerations were made to standardize the computerised transfer of the content of the documents, its output on conventional information carrier and its reproduction without loss of quality. Remarks in international standards with regard to document handling are respected and supported by this standard and if necessary adopted or completed to the well-established procedures in the European railway business. This European Standard “Technical drawings — Railway applications” consists of the following parts: EN 15016-1: General principles EN 15016-2: Parts lists EN 15016-3: Handling of modifications of technical documents
prEN ISO 21267-4: Data exchange The annexes A and B are normative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 15016-1:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.