EN 15876-1:2016

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektronsko pobiranje pristojbin - Vrednotenje skladnosti opreme v vozilu in v obcestni napravi s standardom EN 15509 - 1. del: Zgradba preskuševalnega niza in namen preskušanjaElektronische Gebührenerhebung - Konformitätsprüfung von Fahrzeuggeräten und straßenseitigen Einrichtungen nach EN 15509 - Teil 1: Struktur und Zweck des PrüfprogrammsPerception de télépéage - Evaluation de conformité de l'équipement embarqué et de l'équipement au sol à la EN 15509 - Partie 1: Structure des suites de tests et intention des testsElectronic fee collection - Conformity evaluation of on-board and roadside equipment to EN 15509 - Part 1: Test suite structure and test purposes43.040.15Car informatics. On board computer systems35.240.60Uporabniške rešitve IT v prometuIT applications in transport03.220.20Cestni transportRoad transportICS:Ta slovenski standard je istoveten z:EN 15876-1:2016SIST EN 15876-1:2017en,fr,de01-april-2017SIST EN 15876-1:2017SLOVENSKI
STANDARDSIST EN 15876-1:2010+A1:20121DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15876-1
October
t r s x ICS
u wä t v rä x r Supersedes EN
s w z y xæ sã t r s r ªA sã t r s tEnglish Version
Electronic fee collection æ Evaluation of onæboard and roadside equipment for conformity to EN
s w w r { æ Part
sã Test suite structure and test purposes Perception de tßlßpßage æ Evaluation de conformitß de l 5ßquipement embarquß et de l 5ßquipement au sol à la EN
s w w r { æ Partie
sã Structure des suites de tests et intention des tests
Elektronische Gebührenerhebung æ Konformitätsprüfung von Fahrzeuggeräten und straßenseitigen Einrichtungen nach EN
s w w r { æ Teil
sã Struktur und Zweck des Prüfprogramms This European Standard was approved by CEN on
w September
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s w z y xæ sã t r s x ESIST EN 15876-1:2017

Test Purposes for On-Board Units . 16 A.1 Introduction . 16 A.2 Physical Layer . 16 A.2.1 BV Test Purposes . 16 A.2.2 BI Test Purposes . 18 A.3 MAC . 18 A.3.1 BV Test Purposes . 18 A.3.2 BI Test Purposes . 19 A.4 LLC . 24 A.4.1 BV Test Purposes . 24 A.4.2 BI Test Purposes . 25 A.5 Application Layer . 27 A.5.1 Introduction and general conventions . 27 A.5.2 Structure of BST and VST . 28 A.5.2.1 BST . 28 A.5.2.2 VST . 29 A.5.3 PDUs Parameters . 32 A.5.3.1 Parameters of request PDUs (security level 0) . 32 A.5.3.2 Parameters of request PDUs (security level 1) . 33 A.5.3.3 Parameters of response PDUs . 35 A.5.4 Application I-kernel test purposes for On-Board Unit, security level 0 (AP-0BAS) . 36 A.5.4.1 Data Structures . 36 SIST EN 15876-1:2017

Test Purposes for Roadside Equipment . 74 B.1 Introduction . 74 B.2 Physical layer . 74 B.2.1 BV test purposes . 74 B.2.2 BI test purposes . 76 B.3 MAC Sublayer . 76 B.3.1 BV test purposes . 76 B.3.2 BI test purposes . 78 B.4 LLC Sublayer . 83 B.4.1 BV test purposes . 83 B.4.2 BI test purposes . 84 B.5 Application Layer Test Purposes . 85 B.5.1 Introduction and general conventions . 85 B.5.2 Application initialization phase test purposes, security level 0 (AP-0BAS) . 86 B.5.2.1 Introduction . 86 B.5.2.2 BV test purposes . 88 B.5.2.3 BI test purposes . 88 B.5.3 Application GET-rq PDU test purposes, security level 0 (AP-0GET) . 88 B.5.3.1 General . 88 B.5.3.2 BV test purposes . 88 B.5.3.3 BI test purposes . 89 B.5.4 Application SET-rq PDU test purposes, security level 0 (AP-0SET) . 90 B.5.4.1 General . 91 B.5.4.2 BV test purposes . 91 B.5.4.3 BI test purposes . 94 B.5.5 Application GET-STAMPED-rq PDU test purposes, security level 0 (AP-0STA) . 94 B.5.5.1 General . 94 B.5.5.2 BV test purposes . 94 B.5.5.3 BI test purposes . 95 B.5.6 Application SET-MMI-rq PDU test purposes, security level 0 (AP-0MMI) . 97 B.5.6.1 General . 97 B.5.6.2 BV Test Purposes . 97 B.5.6.3 BI Test Purposes . 98 B.5.7 Application ECHO-rq PDU test purposes, security level 0 (AP-0ECH) . 98 B.5.7.1 General . 98 SIST EN 15876-1:2017

PCTR Proforma for On-Board Units . 107 C.1 Introduction. 107 C.2 Identification summary . 107 C.2.1 Protocol conformance test report . 107 C.2.2 DUT identification . 107 C.2.3 Testing environment . 108 SIST EN 15876-1:2017

PCTR Proforma for Roadside Equipment . 121 D.1 Introduction . 121 D.2 Identification summary . 121 D.2.1 Protocol conformance test report . 121 D.2.2 DUT identification . 121 D.2.3 Testing environment . 122 D.2.4 Limits and reservation . 122 D.2.5 Comments . 122 D.3 DUT Conformance status . 123 D.4 Static conformance summary . 123 D.5 Dynamic conformance summary . 123 D.6 Static conformance review report . 124 D.7 Test campaign report . 125 D.8 Observations . 129 Bibliography . 130
— EN 15876-2, Evaluation of on-board and roadside equipment for conformity to EN 15509
Together, the two parts of EN 15876 provide the necessary foundation for implementation of the interoperability requirements as stated in EN 15509: — industry is provided with an easy-to-use toolbox for product assessment; — operators can easily assess conformity to EN 15509 and reference to the standard in tendering processes; — authorities and joint undertakings may reference to the test standard when stating interoperability requirements; — certification organisations are given an effective tool for certification of products. SIST EN 15876-1:2017

wã -1) EN ISO 14816, Road transport and traffic telematics — Automatic vehicle and equipment identification —
EN ISO 14906:2011, Electronic fee collection — Application interface definition for dedicated short-range
CEN ISO/TS 14907-2, Electronic fee collection — Test procedures for user and fixed equipment — Part
xã Conformance test for the on-- ETSI EN 300 674-1:2004,
- ETSI/TS 102 486-1-2:2008, Part
wã DSRC data link layerã medium access and logical link controlâ Sub-Part
xã Test Suite Structure and
ETSI/TS 102 486-2-2:2008, Intelligent Transport SyPart
xã DSRC application layerâ Sub- 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 attribute addressable package of data consisting of a single data element or structured sequences of data elements [SOURCE: ISO 17575-1:2016, 3.2] SIST EN 15876-1:2017

TP ID The TP ID is a unique identifier. It shall be specified according to the TP naming conventions defined in the sub-clause below. Title Short description of Test Purpose objective. Reference The reference should contain the references of the subject to be validated by the actual TP (specification reference, clause, and paragraph). TP origin Indicates if the TP is identical to a TP defined in another test standard, derived from a TP defined in another test standard, or specific for this standard profile. Initial condition The condition defines in which initial state the DUT has to be to apply the actual TP. Stimulus and expected behaviour Definition of the events the tester performs, and the events that are expected from the DUT to conform to the base specification. SIST EN 15876-1:2017

PHY Physical layer
MAC MAC sublayer
LLC LLC sublayer
AP-0BAS Application layer – I Kernel support Security level 0
AP-0FUN Application layer – T Kernel support Security level 0
AP-0DAT Application layer – Data attributes support Security Level 0
AP-0SEC Application layer – Security Level 0 support
AP-0TRA Application layer – Transaction support Security level 0
AP-1BAS Application layer – I Kernel support Security level 1
AP-1FUN Application layer – T Kernel support Security level 1
AP-1DAT Application layer – Data attributes support Security Level 1
AP-1SEC Application layer – Security Level 1 support
AP-1TRA Application layer – Transaction support Security level 1
AP-0BAS Application layer – Initialisation phase support Security level 0
AP-0GET Application layer - GET-rq PDU test purposes, security level 0
AP-0SET Application layer - SET-rq PDU test purposes, security level 0
AP-0STA Application layer - GET-STAMPED-rq PDU test purposes, security level 0
AP-0MMI Application layer - SET-MMI-rq PDU test purposes security level 0
AP-0ECH Application layer - ECHO-rq PDU test purposes, security level 0
AP-0REL Application layer - EVENT-REPORT-rq PDU test purposes, security level 0
AP-1BAS Application layer - initialization phase test purposes, security level 1
AP-1GET Ap
...