EN 10284:2000
(Main)Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
This standard specifies the requirements for the design, performance and testing of fittings made of malleable cast iron (see also clause 5 Materials) with compression ends for polyethylene piping systems. It applies to piping systems in polyethylene (PE) materials for different application fields, such as water and gas supply, water distribution, irrigation and gaseous fuel systems.
Tempergußfittings mit Klemmanschlüssen für Polyethylen(PE)-Rohrleitungssysteme
Diese Norm legt Anforderungen an die Konstruktion, Gebrauchseigenschaften und Prüfung von Fittings aus Temperguß (siehe auch 5 Werkstoffe) mit Klemmanschlüssen für Polyethylen-Rohrleitungsysteme fest. Sie gilt für Rohrleitungssysteme aus Polyethylen (PE)-Werkstoffe für unterschiedliche Anwendungsgebiete, wie z.B. die Wasser- und Gasversorgung, Wasserveteilung, Bewässerung sowie Brenngassysteme.
Raccords en fonte malléable avec joints à compression pour systèmes de canalisation en polyéthylène (PE)
La présente norme spécifie les exigences relatives à la conception, aux performances et aux essais des raccords en fonte malléable (voir également en 5, Matériaux) avec joints à compression pour systèmes de canalisation en polyéthylène. Elle s'applique aux systèmes de canalisation en polyéthylène (PE) utilisables dans différents domaines comme l'adduction d'eau ou l'alimentation en gaz, la distribution d'eau, l'irrigation et les systèmes transportant des combustibles de type gazeux.
Fitingi iz temprane litine s koničnimi priključki za polietilenske (PE) cevovode
General Information
- Status
- Withdrawn
- Publication Date
- 21-Mar-2000
- Withdrawal Date
- 16-Dec-2025
- Technical Committee
- ECISS/TC 110 - Steel tubes, and iron and steel fittings
- Drafting Committee
- ECISS/TC 29/SC 3/WG 3 - Malleable cast iron fittings
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 22-Dec-2010
- Completion Date
- 22-Dec-2010
Relations
- Effective Date
- 18-Jan-2023
Frequently Asked Questions
EN 10284:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems". This standard covers: This standard specifies the requirements for the design, performance and testing of fittings made of malleable cast iron (see also clause 5 Materials) with compression ends for polyethylene piping systems. It applies to piping systems in polyethylene (PE) materials for different application fields, such as water and gas supply, water distribution, irrigation and gaseous fuel systems.
This standard specifies the requirements for the design, performance and testing of fittings made of malleable cast iron (see also clause 5 Materials) with compression ends for polyethylene piping systems. It applies to piping systems in polyethylene (PE) materials for different application fields, such as water and gas supply, water distribution, irrigation and gaseous fuel systems.
EN 10284:2000 is classified under the following ICS (International Classification for Standards) categories: 23.040.40 - Metal fittings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10284:2000 has the following relationships with other standards: It is inter standard links to EN 10284:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10284:2000 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 10284:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tempergußfittings mit Klemmanschlüssen für Polyethylen(PE)-RohrleitungssystemeRaccords en fonte malléable avec joints a compression pour systemes de canalisation en polyéthylene (PE)Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems23.040.40Kovinski fitingiMetal fittingsICS:Ta slovenski standard je istoveten z:EN 10284:2000SIST EN 10284:2001en01-november-2001SIST EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...