EN 1052-3:2002
(Main)Methods of test for masonry - Part 3: Determination of initial shear strength
Methods of test for masonry - Part 3: Determination of initial shear strength
This European Standard specifies a method for determining the in plane initial shear strength of horizontal bed joints in masonry using a specimen tested in shear.
Guidance is given on the preparation of the specimens, the conditioning required before testing, the testing machine, the method of test, the method of calculation and the contents of the test report.
Prüfverfahren für Mauerwerk - Teil 3: Bestimmung der Anfangsscherfestigkeit (Haftscherfestigkeit)
Diese Europäische Norm legt ein Verfahren zur Bestimmung der in der Tragwerksebene wirkenden Anfangs-
Scherfestigkeit (Haftscherfestigkeit) von horizontalen Lagerfugen in Mauerwerk fest. Dabei wird ein Prüfkörper auf
Abscheren geprüft.
Sie enthält Anleitungen zur Herstellung der Prüfkörper, zu der erforderlichen Konditionierung vor der Prüfung, zur
Prüfmaschine, zum Prüfverfahren, zum Berechnungsverfahren und zum Inhalt des Prüfberichtes.
Méthodes d'essai de la maçonnerie - Partie 3: Détermination de la résistance initiale au cisaillement
La présente norme européenne décrit une méthode de détermination de la résistance initiale au cisaillement dans le plan de joints d'assises horizontaux dans la maçonnerie à l'aide d'un corps d'épreuve soumis à un essai de cisaillement.
Des indications sont données sur la préparation des corps d'épreuve, le conditionnement nécessaire avant l'essai, la machine d'essai, la méthode d'essai, la méthode de calcul et le contenu du rapport d'essai.
Metode preskušanja zidovine - 3. del: Določevanje začetne strižne trdnosti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prüfverfahren für Mauerwerk - Teil 3: Bestimmung der Anfangsscherfestigkeit (Haftscherfestigkeit)Méthodes d'essai de la maçonnerie - Partie 3: Détermination de la résistance initiale au cisaillementMethods of test for masonry - Part 3: Determination of initial shear strength91.080.30Zidane konstrukcijeMasonryICS:Ta slovenski standard je istoveten z:EN 1052-3:2002SIST EN 1052-3:2004en01-januar-2004SIST EN 1052-3:2004SLOVENSKI
STANDARD
SIST EN 1052-3:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1052-3July 2002ICS 91.080.30English versionMethods of test for masonry - Part 3: Determination of initialshear strengthMéthodes d'essai de la maçonnerie - Partie 3:Détermination de la résistance initiale au cisaillementPrüfverfahren für Mauerwerk - Teil 3: Bestimmung derAnfangsscherfestigkeit (Haftscherfestigkeit)This European Standard was approved by CEN on 11 April 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1052-3:2002 ESIST EN 1052-3:2004
EN 1052-3:2002 (E)2ContentspageForeword.31 Scope.42 Normative references.43 Principle.44 Terms, definitions and symbols.55 Materials.66 Apparatus.67 Preparation and curing of specimens.78 Procedure.89 Calculations.1110 Evaluation of results.1111 Test report.12Annex A
(informative)
Types of failure.13Bibliography.14SIST EN 1052-3:2004
EN 1052-3:2002 (E)3ForewordThis document EN 1052-3:2002 has been prepared by Technical Committee CEN/TC 125 "Masonry", thesecretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by January 2003, and conflicting national standards shall bewithdrawn at the latest by January 2003.Annex A of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.