EN 771-3:2011+A1:2015
(Main + Amendment)Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
This European Standard specifies the characteristics and performance requirements of aggregate concrete masonry units made from dense and lightweight aggregates or a combination of both for which the main intended uses are common, facing or exposed masonry in load bearing or non-load bearing building and civil engineering applications. The units are suitable for all forms of walling, including single leaf, external leaf to chimneys, cavity wall, partitions, retaining, and basement. They can provide fire protection, thermal insulation, sound insulation and sound absorption.
This European Standard includes aggregate concrete masonry units of an overall non-rectangular parallelepiped shape, !specially" shaped and accessory units.
It defines the performance related to e.g. strength, density, dimensional accuracy, and provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard. The marking requirement for products covered by this European Standard is included.
This European Standard does not specify standard sizes for aggregate concrete masonry units, nor standard work dimensions and angles of specially shaped aggregate concrete masonry units. It does not cover storey height panels, chimney flue linings nor units intended for use as a damp proof course. It does not cover units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire.
Festlegungen für Mauersteine - Teil 3: Mauersteine aus Beton (mit dichten und porigen Zuschlägen)
Spécifications pour éléments de maçonnerie - Partie 3: Éléments de maçonnerie en béton de granulats (granulats courants et légers)
Specifikacija za zidake - 3. del: Betonski zidaki (kompaktni in lahki agregati)
Ta evropski standard določa značilnosti in zahteve za zmogljivost betonskih zidakov, narejenih iz kompaktnih in lahkih agregatov ali kombinacije obojega, ki so predvideni predvsem za uporabo pri splošni, fasadni in izpostavljeni zidavi pri nosilnih ali nenosilnih visokih ali nizkih gradnjah. Zidaki so primerni za vse oblike sten, vključno z enojnim slojem in zunanjim slojem pri dimnikih, votlih zidovih, predelkih, opornih zidovih in kleteh. Zagotavljajo lahko zaščito pred požarom, toplotno izolacijo, zvočno izolacijo in zvočno absorpcijo.
Ta evropski standard vključuje betonske zidake nepravokotnih paralelepipednih oblik, zidake »posebnih« oblik in pomožne zidake.
Opredeljuje zmogljivost v zvezi z npr. močjo, gostoto in dimenzijsko natančnostjo ter omogoča ocenjevanje in preverjanje nespremenljivosti zmogljivosti (AVCP) proizvodov v skladu s tem evropskim standardom. Vključena je zahteva za označevanje proizvodov, ki jih zajema ta evropski standard.
Ta evropski standard ne določa standardnih velikosti za betonske zidake niti ne določa standardnih delovnih dimenzij in kotov betonskih zidakov posebnih oblik. Ne zajema panelov etažne višine, oblog za dimne cevi za dimnike ali zidakov, ki se uporabljajo kot izolacijska zaščita pred vlago. Ne zajema zidakov z vgrajenim materialom za toplotno izolacijo, vezanim na stranice zidaka, ki so lahko izpostavljene ognju.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2015
1DGRPHãþD
SIST EN 771-3:2011
Specifikacija za zidake - 3. del: Betonski zidaki (kompaktni in lahki agregati)
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and
lightweight aggregates)
Festlegungen für Mauersteine - Teil 3: Mauersteine aus Beton (mit dichten und porigen
Zuschlägen)
Spécifications pour éléments de maçonnerie - Partie 3: Éléments de maçonnerie en
béton de granulats (granulats courants et légers)
Ta slovenski standard je istoveten z: EN 771-3:2011+A1:2015
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 771-3:2011+A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2015
ICS 91.100.30 Supersedes EN 771-3:2011
English Version
Specification for masonry units - Part 3: Aggregate concrete
masonry units (Dense and lightweight aggregates)
Spécifications pour éléments de maçonnerie - Partie 3: Festlegungen für Mauersteine - Teil 3: Mauersteine aus
Éléments de maçonnerie en béton de granulats (granulats Beton (mit dichten und porigen Zuschlägen)
courants et légers)
This European Standard was approved by CEN on 10 March 2011 and includes Amendment 1 approved by CEN on 11 January 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 771-3:2011+A1:2015 E
worldwide for CEN national Members.
Contents Page
European foreword .4
1 Scope .5
2 Normative references .5
3 Terms, definitions and symbols .6
3.1 Terms and definitions .6
3.2 Symbols .8
4 Materials .8
5 Requirements for aggregate concrete masonry units .9
5.1 General .9
5.2 Dimensions and tolerances .9
5.2.1 Dimensions .9
5.2.2 Dimensional tolerances . 10
5.3 Configuration and appearance . 10
5.3.1 Configuration . 10
5.3.2 Appearance . 11
5.4 Density . 11
5.4.1 Gross dry density of the units . 11
5.4.2 Net dry density of the concrete . 12
5.4.3 Tolerances . 12
5.5 Mechanical strength . 12
5.5.1 Compressive strength . 12
5.5.2 Bending tensile strength . 13
5.6 Thermal properties . 13
5.7 Durability . 13
5.8 Water absorption by capillarity . 14
5.9 Moisture movement . 14
5.10 Water vapour permeability . 14
5.11 Reaction to fire . 14
5.12 Shear bond strength . 14
5.12.1 General . 14
5.12.2 Declaration based on fixed values . 15
5.12.3 Declaration based on tests . 15
5.13 Flexural bond strength . 15
5.14 Dangerous substances . 15
6 Description, designation and classification of aggregate concrete masonry units . 15
6.1 Description and designation of units . 15
6.2 Classification . 16
7 Marking . 16
8 !Assessment and verification of constancy of performance (AVCP)" . 16
8.1 General . 16
8.2 !Product type determination" . 17
8.3 Factory production control . 18
8.3.1 General . 18
8.3.2 Testing and measuring equipment . 18
8.3.3 Production equipment . 18
8.3.4 Raw materials . 18
8.3.5 Production process . 19
8.3.6 Finished product testing . 19
8.3.7 Statistical techniques . 19
8.3.8 Marking and stock control of products . 19
8.3.9 Traceability . 19
8.3.10 Nonconforming products . 19
Annex A (normative) !Sampling for determination of product type and for independent testing
of consignments" . 20
A.1 General . 20
A.2 Sampling procedure . 20
A.2.1 General . 20
A.2.2 Random sampling . 20
A.2.3 Representative sampling . 20
A.2.4 Dividing the sample . 21
A.2.5 Number of units required for testing . 21
A.3 Place and dates of inspection and testing . 22
Annex B (normative) !Compliance criteria for product type determination and for independent
testing of consignments" . 23
B.1 Dimensions and tolerances (see 5.2) . 23
B.2 Configuration and appearance (see 5.3) . 23
B.3 Density (see 5.4) . 23
B.4 Mechanical strength (see 5.5) . 23
B.4.1 Characteristic strength . 23
B.4.2 Mean strength . 23
B.5 Moisture movement and water absorption by capillarity (see 5.9 and 5.8) . 23
Annex C (informative) Examples of different shapes of aggregate concrete masonry units . 27
Annex D (informative) Guidance for test frequencies for designing a FPC system to demonstrate
conformity of finished products with the requirements of the standard and the
declaration of the manufacturer . 28
Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the
EU Construction Products Directive" . 30
ZA.1 Scope and relevant characteristics . 30
ZA.2 Procedure for AVCP of aggregate concrete masonry units . 32
ZA.2.1 System(s) of AVCP . 32
ZA.2.2 Declaration of performance (DoP) .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.