EN 846-9:2016

SLOVENSKI STANDARD
01-junij-2016
1DGRPHãþD
SIST EN 846-9:2001
Metode preskušanja dodatnih komponent zidovja - 9. del: Ugotavljanje upogibne in
strižne nosilnosti preklad
Methods of test for ancillary components for masonry - Part 9: Determination of flexural
resistance and shear resistance of lintels
Prüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil 9: Bestimmung der Biege-
und Schubwiderstandsfähigkeit von Stürzen
Méthodes d'essai des composants accessoires de maçonnerie - Partie 9: Détermination
de la résistance à la flexion et de la résistance au cisaillement des linteaux
Ta slovenski standard je istoveten z: EN 846-9:2016
ICS:
91.080.30 Zidane konstrukcije Masonry
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 846-9
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2016
EUROPÄISCHE NORM
ICS 91.060.10; 91.080.30 Supersedes EN 846-9:2000
English Version
Methods of test for ancillary components for masonry -
Part 9: Determination of flexural resistance and shear
resistance of lintels
Méthodes d'essai des composants accessoires de Prüfverfahren für Ergänzungsbauteile für Mauerwerk -
maçonnerie - Partie 9: Détermination de la résistance à Teil 9: Bestimmung der Biege- und
la flexion et de la résistance au cisaillement des Schubwiderstandsfähigkeit von Stürzen
linteaux
This European Standard was approved by CEN on 3 January 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 846-9:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Principle . 4
4 Symbols . 4
5 Materials . 4
5.1 Structural shell casing units . 4
5.2 Composite lintels . 4
6 Apparatus . 4
7 Sampling . 5
8 Procedure. 5
8.1 General . 5
8.2 Method of support . 5
8.3 Conditioning of lintels finished in situ . 5
8.4 Lateral restraint or composite action . 5
8.5 Loading. 5
8.5.1 General requirements . 5
8.5.2 Flexural resistance . 5
8.5.3 Shear resistance. 6
8.5.4 Deflection monitoring . 6
8.6 Test procedure for single, composite and combined lintels . 6
8.6.1 Flexural resistance . 6
8.6.2 Shear resistance. 6
9 Expression of result . 6
10 Evaluation of results . 7
11 Test report . 7
Bibliography . 10

European foreword
This document (EN 846-9:2016) has been prepared by Technical Committee CEN/TC 125 “Masonry”,
the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2016, and conflicting national standards
shall be withdrawn at the latest by December 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 846-9:2000.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
Provision has been made in this standard for the restraint of ‘L’ shape lintels against excessive torsion
during testing.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
1 Scope
This European Standard specifies methods for determining the flexural and shear resistan
...