EN 771-2:2011+A1:2015
(Main + Amendment)Specification for masonry units - Part 2: Calcium silicate masonry units
Specification for masonry units - Part 2: Calcium silicate masonry units
This European Standard specifies the characteristics and performance requirements of calcium silicate masonry units for which the main intended uses are inner walls, outer walls, cellars, foundations and external chimney masonry.
This European Standard is intended to apply to all calcium silicate masonry units, including those of an overall nonrectangular parallelepiped shape, specially shaped and accessory units.
It defines the performance related to e.g. strength, density and dimensional accuracy, measured according to the corresponding test methods contained in separate European Standards.
It provides for the !assessment and verification of constancy of performance (AVCP)" of the product to this European Standard. The marking requirement for products covered by this document is also included.
This European Standard does not specify standard sizes for calcium silicate masonry units, nor standard work dimensions and angles of specially shaped and accessory units.
It does not cover units with more than 60 % volume of voids, nor products made from shale as a major raw material.
It does not cover storey height panels.
It does not cover units intended for use as a damp proof course, nor units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire, nor chimney flue units.
Festlegungen für Mauersteine - Teil 2: Kalksandsteine
Spécifications pour éléments de maçonnerie - Partie 2: Éléments de maçonnerie en silico-calcaire
Specifikacija za zidake - 2. del: Apneno peščeni zidaki
Ta evropski standard določa značilnosti in zahteve za zmogljivost apneno peščenih zidakov, ki so predvideni predvsem za uporabo pri zidavi notranjih sten, zunanjih sten, kleti, temeljev in zunanjosti dimnikov.
Ta evropski standard velja za vse apneno peščene zidake, vključno z zidaki nepravokotne paralelepipedne oblike, zidaki posebnih oblik in pomožnimi zidaki.
Opredeljuje zmogljivosti v zvezi z npr. močjo, gostoto in dimenzijsko natančnostjo, izmerjeno v skladu z ustreznimi preskusnimi metodami, navedenimi v ločenih evropskih standardih..
Omogoča »ocenjevanje in preverjanje nespremenljivosti zmogljivosti (AVCP)« proizvodov v skladu s tem evropskim standardom. Vključena je tudi zahteva za označevanje proizvodov, ki jih zajema ta dokument.
Ta evropski standard ne določa standardnih velikosti za opečne zidake niti ne določa standardnih delovnih dimenzij, kotov in polmerov opečnih zidakov posebnih oblik.
Ne zajema zidakov z več kot 60 % praznega prostora in proizvodov, narejenih iz skrilavca kot glavne surovine.
Ne zajema panelov etažne višine.
Ne zajema zidakov, ki se uporabljajo kot izolacijska zaščita pred vlago, zidakov z vgrajenim materialom za toplotno izolacijo, vezanim na stranice zidaka, ki so lahko izpostavljene ognju, ali zidakov za dimne cevi dimnikov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2015
1DGRPHãþD
SIST EN 771-2:2011
6SHFLILNDFLMD]D]LGDNHGHO $SQHQRSHãþHQL]LGDNL
Specification for masonry units - Part 2: Calcium silicate masonry units
Festlegungen für Mauersteine - Teil 2: Kalksandsteine
Spécifications pour éléments de maçonnerie - Partie 2: Eléments de maçonnerie en
silico-calcaire
Ta slovenski standard je istoveten z: EN 771-2:2011+A1:2015
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 771-2:2011+A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2015
ICS 91.100.25 Supersedes EN 771-2:2011
English Version
Specification for masonry units - Part 2: Calcium silicate
masonry units
Spécifications pour éléments de maçonnerie - Partie 2: Festlegungen für Mauersteine - Teil 2: Kalksandsteine
Eléments de maçonnerie en silico-calcaire
This European Standard was approved by CEN on 10 March 2011 and includes Amendment 1 approved by CEN on 11 January 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 771-2:2011+A1:2015 E
worldwide for CEN national Members.
Contents Page
European foreword .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .6
4 Materials and manufacture .8
5 Requirements for calcium silicate masonry units .8
5.1 General .8
5.2 Dimensions and tolerances .9
5.2.1 Dimensions .9
5.2.2 Dimensional tolerances . 10
5.3 Configuration . 10
5.4 Dry density . 11
5.4.1 Gross dry density . 11
5.4.2 Net dry density . 11
5.5 Compressive strength . 12
5.6 Thermal properties . 12
5.7 Durability . 12
5.8 Water vapour permeability . 13
5.9 Reaction to fire . 13
5.10 Water absorption . 13
5.11 Moisture movement . 13
5.12 Bond strength . 14
5.12.1 General . 14
5.12.2 Declaration based on fixed values . 14
5.12.3 Declaration based on tests . 14
5.13 Dangerous substances . 14
6 !Description, designation, designation code and classification of calcium silicate
masonry units" . 14
6.1 Description and designation . 14
6.2 Designation codes . 15
6.3 Classification . 17
7 Marking . 17
8 !Assessment and verification of constancy of performance (AVCP)" . 17
8.1 General . 17
8.2 Product type determination . 17
8.3 Factory production control . 18
8.3.1 General . 18
8.3.2 Testing and measuring equipment . 19
8.3.3 Production Equipment . 19
8.3.4 Raw materials . 19
8.3.5 Production process . 19
8.3.6 Finished product testing . 19
8.3.7 Statistical techniques . 19
8.3.8 Marking and stock control of products . 20
8.3.9 Traceability . 20
8.3.10 Nonconforming products . 20
Annex A (normative) !Sampling for product type determination tests and for independent
testing of consignments" . 21
A.1 General . 21
A.2 Sampling procedure . 21
A.2.1 General . 21
A.2.2 Random sampling . 21
A.2.3 Representative sampling . 21
A.2.4 Dividing the sample . 22
A.2.5 Number of masonry units required for testing . 22
Annex B (normative) Cutting schemes . 24
B.1 General . 24
B.2 Representative portions for compressive strength determination . 24
B.3 Representative portions for determination of freeze-thaw resistance . 25
Annex C (normative) Tolerances on accessory units . 26
C.1 Dimensions of rectangular and non-rectangular accessory calcium silicate masonry units . 26
C.2 Tolerances for accessory calcium silicate masonry units . 28
Annex D (informative) Classification systems . 30
D.1 Classification based on compressive strength . 30
D.2 Classification based on gross dry density . 30
Annex E (informative) Guidance for test frequencies for designing a FPC system to demonstrate
conformity of finished products with the requirements of the standard and the
declaration of the manufacturer . 32
Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the
EU Construction Products Regulation" . 34
ZA.1 Scope and relevant characteristics . 34
ZA.2 Procedure for AVCP of calcium silicate masonry units . 36
ZA.2.1 System(s) of AVCP . 36
ZA.2.2 Declaration of performance (DoP) . 38
ZA.3 CE marking and labelling. 42
Bibliography . 45
European foreword
This document (EN 771-2:2011+A1:2015) has been prepared by Technical Committee CEN/TC 125
“Masonry”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2016, and conflicting national standards shall be withdrawn
at the latest by May 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes !EN 771-2:2011".
This document includes Amendment 1 approved by CEN on 2015-01-11.
The start and finish of text introduced or altered by amendment is indicated in the text by tags !".
This document has been prepared
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.