iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 772-5:2016/AC:2017

(Corrigendum)

Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units

Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units

TC - clarification of Units

Prüfverfahren für Mauersteine - Teil 5: Bestimmung des Gehalts an aktiven löslichen Salzen von Mauerziegeln

Méthodes d'essai des éléments de maçonnerie - Partie 5: Détermination de la teneur en sels solubles actifs des éléments de maçonnerie en terre cuite

Metode preskušanja zidakov - 5. del: Določevanje vodotopnih soli v opečnih zidakih

General Information

Status
Published
Publication Date
21-Mar-2017
ICS
91.100.25 - Terracotta building products
Technical Committee
CEN/TC 125 - Masonry
Drafting Committee
CEN/TC 125/WG 4 - Test methods
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
22-Mar-2017
Completion Date
22-Mar-2017
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Mandate
M/116 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on masonry and related products
Ref Project
SIST EN 772-5:2016/AC:2017 - Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units

Relations

Corrects
EN 772-5:2016 - Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units
Effective Date
28-Dec-2016

Buy Standard

EN 772-5:2016/AC:2017EN 772-5:2016/AC:2017
PreviousNext
Corrigendum
EN 772-5:2016/AC:2017
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.]LGDNLKPrüfverfahren für Mauersteine - Teil 5: Bestimmung des Gehalts an aktiven löslichen Salzen von MauerziegelnMéthodes d'essai des éléments de maçonnerie - Partie 5: Détermination de la teneur en sels solubles actifs des éléments de maçonnerie en terre cuiteMethods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units91.100.25Gradbeni izdelki iz terakoteTerracotta building productsICS:Ta slovenski standard je istoveten z:EN 772-5:2016/AC:2017SIST EN 772-5:2016/AC:2017en,fr,de01-maj-2017SIST EN 772-5:2016/AC:2017SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 772-5:2016/AC
March
t r s y
Mars
t r s y
März
t r s y ICS
{ sä s r rä t w English version Version Française Deutsche Fassung
Methods of test for masonry units æ Part
wã Determination of the active soluble salts content of clay masonry units
Méthodes d 5essai des éléments de maçonnerie æ Partie
wã Détermination de la teneur en sels solubles actifs des éléments de maçonnerie en terre cuite
Prüfverfahren für Mauersteine æ Teil
wã Bestimmung des Gehalts an aktiven löslichen Salzen von Mauerziegeln This corrigen
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 772-22:2018(Main)
Methods of test for masonry units - Part 22: Determination of freeze/thaw resistance of clay masonry units
SIST EN 772-22:2019

This document specifies a method for determining the freeze/thaw resistance of clay masonry units in one of two categories F1 or F2.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16886:2016(Main)
Guidance on the application of statistical methods for determining the properties of masonry products
SIST-TP CEN/TR 16886:2017

In the masonry unit standards and in national legislation, some properties need to be declared based on a certain fractile and confidence level. To demonstrate compliance with that a statistical tool can be used.
The purpose of this Technical Report is to exemplify how a statistical tool can be used in practice. This document should not contradict nor extend the scope of the work and role of a Notified Body, nor impose additional burdens on the manufacturer, beyond those laid down in the Construction Products Regulation and the product standards.
Mechanical and other properties of building materials and components are in the report described by random variables with a certain type of probability distribution. The popular normal distribution (Laplace-Gauss distribution) is given in Annex A. Normal distribution may be used to approximate many actual symmetrical distributions. When a remarkable asymmetry is observed, then another type of distribution reflecting this asymmetry should be considered, leading to a more complex method to demonstrate compliance with the product standard. More information on the normality test of Shapiro-Wilk is given in Annex D.

  • Technical report
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 772-5:2016(Main)
Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units
SIST EN 772-5:2016

This European Standard specifies a method for determining the active soluble salts content of clay masonry units.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 771-2:2011+A1:2015(Main)
Specification for masonry units - Part 2: Calcium silicate masonry units
SIST EN 771-2:2011+A1:2015

This European Standard specifies the characteristics and performance requirements of calcium silicate masonry units for which the main intended uses are inner walls, outer walls, cellars, foundations and external chimney masonry.
This European Standard is intended to apply to all calcium silicate masonry units, including those of an overall nonrectangular parallelepiped shape, specially shaped and accessory units.
It defines the performance related to e.g. strength, density and dimensional accuracy, measured according to the corresponding test methods contained in separate European Standards.
It provides for the !assessment and verification of constancy of performance (AVCP)" of the product to this European Standard. The marking requirement for products covered by this document is also included.
This European Standard does not specify standard sizes for calcium silicate masonry units, nor standard work dimensions and angles of specially shaped and accessory units.
It does not cover units with more than 60 % volume of voids, nor products made from shale as a major raw material.
It does not cover storey height panels.
It does not cover units intended for use as a damp proof course, nor units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire, nor chimney flue units.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 771-1:2011+A1:2015(Main)
Specification for masonry units - Part 1: Clay masonry units
SIST EN 771-1:2011+A1:2015

This European Standard specifies the characteristics and performance requirements for masonry units manufactured from clay for which the main intended uses are protected or unprotected masonry structure (see definitions 3.3 and 3.4) (e.g. facing and rendered masonry, loadbearing or non-loadbearing masonry structures, including internal linings and partitions, for building and civil engineering).
(...)
This European Standard includes those clay masonry units of an overall non-rectangular parallelepiped shape.
It defines the performance related to e.g. dimensional tolerances, strength, density measured according to the corresponding test methods contained in separate European Standards.
It provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard.
The marking requirement for products covered by this European Standard is included.
This European Standard does not specify standard sizes for clay masonry units, nor does it specify standard work dimensions, angles and radii of specially shaped clay masonry units. This European Standard does not include method of measurement of angles and radii characteristics of specially shaped clay masonry units.
This European Standard does not cover requirements for the following: units for paving, flue liners and storey height clay masonry units and clay masonry units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire. It does, however, include clay masonry units for external chimney masonry.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 772-1:2011+A1:2015(Main)
Methods of test for masonry units - Part 1: Determination of compressive strength
SIST EN 772-1:2011+A1:2015

This European Standard specifies a method for determining the compressive strength of masonry units.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 772-16:2011(Main)
Methods of test for masonry units - Part 16: Determination of dimensions
SIST EN 772-16:2011

This European Standard specifies a method of determining the overall dimensions, thickness and combined thickness of shells and webs, depth of voids and plane parallelism of the bed faces of masonry units.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 772-18:2011(Main)
Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units
SIST EN 772-18:2011

This European Standard specifies a method of determining the freeze-thaw resistance of calcium silicate masonry units.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 17193(Main)
Clay blocks for concrete ribbed floor systems
oSIST prEN 17193:2018

This document specifies the characteristics for clay blocks in concrete ribbed floor systems. It specifies two types of clay blocks:
-   clay blocks for load-bearing"structural" use (semi-resisting clay blocks and resisting clay blocks)) with essential characteristics:
-   detailing:
-   dimensions;
-   minimum dimensions;
-   configuration;
-   density;
-   mechanical strength:
-   punching (resistance to concentrated loads);
-   longitudinal compressive strength;
-   bending strength;
-   fire:
-   resistance to fire;
-   reaction to fire;
-   thermal conductivity;
and:
-   clay blocks for non-load bearing-non-structural or light structural- use (low non-resisting clay blocks or non-resisting clay blocks) with essential characteristics:
-   detailing:
-   dimensions;
-   minimum dimensions;
-   configuration;
-   density;
-   mechanical strength:
-   punching (resistance to concentrated loads);
-   fire:
-   resistance to fire;
-   reaction to fire;
-   thermal conductivity.
The clay blocks are used with floor plates (EN 13747:2005+A2:2010) and in situ concrete, or only with in situ concrete for the construction of ribbed floor systems.
It includes the test/assessment methods and the way of expressing the test/assessment results.
It provides for the assessment and verification of constancy of performance (AVCP) of the product to maintain the performances related to the declared essential characteristics.
This document does not cover characteristics for clay blocks foreseen for beam-and-block floor systems as covered by EN 15037-3:2009+A1:2011.

  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 771-2:2011/FprA1(Amendment)
Specification for masonry units - Part 2: Calcium silicate masonry units
SIST EN 771-2:2011/kFprA1:2014

This document specifies the characteristics and performance requirements of calcium silicate masonry units for which the main intended uses are inner walls, outer walls, cellars, foundations and external chimney masonry. This document is intended to apply to all calcium silicate masonry units, including those of an overall nonrectangular parallelepiped shape, specially shaped and accessory units.It defines the performance related to e.g. strength, density and dimensional accuracy, measured according to the corresponding test methods contained in separate European Standards. It provides for the evaluation of conformity of the product to this European Standard. The marking requirement for products covered by this document is also included. This document does not specify standard sizes for calcium silicate masonry units, nor standard work dimensions and angles of specially shaped and accessory units. It does not cover units with more than 60 % volume of voids, nor products made from shale as a major raw material. It does not cover storey height panels. It does not cover units intended for use as a damp proof course, nor units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire nor chimney flue units.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day