iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 19650-3:2020

(Main)

Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 3: Operational phase of the assets (ISO 19650-3:2020)

Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 3: Operational phase of the assets (ISO 19650-3:2020)

This document specifies requirements for information management, in the form of a management process, within the context of the operational phase of assets and the exchanges of information within it, using building information modelling.
This document can be applied to all types of assets and by organizations of all types and sizes involved in the operational phase of assets.
The requirements in this document can be achieved through direct actions carried out by the organization in question or can be delegated to another party.

Organisation und Digitalisierung von Informationen zu Bauwerken und Ingenieurleistungen, einschließlich Bauwerksinformationsmodellierung (BIM) - Informationsmanagement mit BIM - Teil 3: Betriebsphase der Assets (ISO 19650-3:2020)

Dieses Dokument legt die Anforderungen an das Informationsmanagement in Form eines Managementprozesses im Kontext der Betriebsphase von Assets und des Informationsaustauschs innerhalb dieser Phase bei der Anwendung von BIM fest.
Dieses Dokument kann auf alle Arten von Assets und von Organisationen aller Arten und Größen angewendet werden, die an der Betriebsphase der Assets beteiligt sind.
Die Anforderungen dieses Dokuments können durch direkte Maßnahmen der betreffenden Organisation umgesetzt werden oder an Dritte delegiert werden.

Organisation et numérisation des informations relatives aux bâtiments et ouvrages de génie civil y compris modélisation des informations de la construction (BIM) - Gestion de l’information par la modélisation des informations de la construction - Partie 3: Phase d’exploitation des actifs (ISO 19650-3:2020)

Le présent document spécifie les exigences relatives à la gestion de l'information, sous la forme d'un processus de gestion, dans le contexte de la phase d'exploitation des actifs, ainsi que les échanges d'informations au cours de cette phase, au moyen de la modélisation des informations de la construction.
Le présent document peut être appliqué à tous les types d'actifs et par tous les types et tailles d'organismes impliqués dans la phase d'exploitation des actifs.
Les exigences du présent document peuvent être atteintes au moyen d'actions directes menées par l'organisme en question ou elles peuvent être déléguées à une autre partie.

Organizacija in digitalizacija informacij v gradbeništvu - Upravljanje informacij z BIM - 3. del: Obratovalna faza sredstev (ISO 19650-3:2020)

General Information

Status
Published
Publication Date
18-Aug-2020
Withdrawal Date
27-Feb-2021
ICS
35.240.67 - IT applications in building and construction industry
91.010.01 - Construction industry in general
93.010 - Civil engineering in general
Technical Committee
CEN/TC 442 - Building Information Modelling (BIM)
Drafting Committee
CEN/TC 442 - Building Information Modelling (BIM)
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-Aug-2020
Completion Date
19-Aug-2020
Ref Project
SIST EN ISO 19650-3:2020 - Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 3: Operational phase of the assets (ISO 19650-3:2020)

Buy Standard

EN ISO 19650-3:2020EN ISO 19650-3:2020
PreviousNext
Standard
EN ISO 19650-3:2020
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19650-3:2020
01-oktober-2020
Organizacija in digitalizacija informacij v gradbeništvu - Upravljanje informacij z
BIM - 3. del: Obratovalna faza sredstev (ISO 19650-3:2020)
Organization and digitization of information about buildings and civil engineering works,
including building information modelling (BIM) - Information management using building
information modelling - Part 3: Operational phase of the assets (ISO 19650-3:2020)
Organisation von Informationen zu Bauwerken - Informationsmanagement mit
Bauwerksinformationsmodellierung - Teil 3: Betriebsphase der Assets (ISO 19650-
3:2020)
Organisation et numérisation des informations relatives aux bâtiments et ouvrages de
génie civil y compris modélisation des informations de la construction (BIM) - Gestion de
l’information par la modélisation des informations de la construction - Partie 3: Phase
d’exploitation des actifs (ISO 19650-3:2020)
Ta slovenski standard je istoveten z: EN ISO 19650-3:2020
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
91.010.01 Gradbeništvo na splošno Construction industry in
general
SIST EN ISO 19650-3:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19650-3:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 19650-3:2020


EN ISO 19650-3
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2020
EUROPÄISCHE NORM
ICS 35.240.67; 93.010; 91.010.01
English Version

Organization and digitization of information about
buildings and civil engineering works, including building
information modelling (BIM) - Information management
using building information modelling - Part 3: Operational
phase of the assets (ISO 19650-3:2020)
Organisation et numérisation des informations Organisation von Informationen zu Bauwerken -
relatives aux bâtiments et ouvrages de génie civil y Informationsmanagement mit
compris modélisation des informations de la Bauwerksinformationsmodellierung - Teil 3:
construction (BIM) - Gestion de l'information par la Betriebsphase der Assets (ISO 19650-3:2020)
modélisation des informations de la construction -
Partie 3: Phase d'exploitation des actifs (ISO 19650-
3:2020)
This European Standard was approved by CEN on 26 July 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19650-3:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 19650-3:2020
EN ISO 19650-3:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 19650-3:2020
EN ISO 19650-3:2020 (E)
European foreword
This document (EN ISO 19650-3:2020) has been prepared by Technical Committee ISO/TC 59
"Buildings and civil engineering works" in collaboration with Technical Committee CEN/TC 442
“Building Information Modelling (BIM)” the secretariat of which is held by SN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2021, and conflicting national standards
shall be withdrawn at the latest by February 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Accor
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 19650-4:2022(Main)
Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 4: Information exchange (ISO 19650-4:2022)
SIST EN ISO 19650-4:2023

This document specifies the detailed process and criteria for decision makings when executing an information exchange as specified by the ISO 19650 series to ensure the quality of the resulting project information model or asset information model. It details the implementation of the concepts in ISO 19650-1 and is applicable to any information exchange within the delivery stages covered by ISO 19650-2 and operational trigger events covered by ISO 19650-3.
This document is applicable to assets of all sizes and all levels of complexity. This includes portfolios of buildings, campuses, infrastructure networks, individual buildings and pieces of infrastructure. The requirements in this document should be applied in a way that is appropriate to the scale and complexity of the asset. This document makes use of the phrase “shall consider”. This phrase is used to introduce a list of items that the person in question is required to think about carefully in connection with the primary requirement described in the subclause. The amount of thought involved, the time taken to complete it, and the need for supporting evidence depend on the complexity of the asset, the experience of the person(s) involved, and the requirements of any national policy on introducing building information modelling. On a relatively small or straightforward asset, it can be possible to complete, or dismiss as not relevant, some of these “shall consider” items very quickly. One way to help identify which of the “shall consider” statements are relevant can be to review each statement and create templates for assets of different sizes and complexity.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 19650-6(Main)
Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 6: Health and safety information (ISO/DIS 19650-6:2023)
oSIST prEN ISO 19650-6:2024

This Document outlines the concepts and principles to ensure that Health and Safety information is developed, shared and managed collaboratively, ensuring the economic, environmental and social benefits are secured.
This Document;
1) specifies requirements for the collaborative sharing of structured H&S information throughout the asset life-cycle.
2) supports the progressive development of structured H&S information for all built assets.
3) provides guidance on how H&S information is produced, flows and can be used throughout the asset lifecycle. Whilst all H&S risk information can be included within an information model, this document requires the contextualization and filtering of hazards and risks to prioritize the elevated risks and aspects that are safety critical.
4) sets out a framework (risk information cycle) for the application of H&S information-use through BIM processes and applications.
This document specifies how to use H&S information in order to:
a)   provide a safer and healthier environment for end-users;
b)   mitigate the inherent hazards and risks across the asset lifecycle;
c)   result in improved H&S performance, fewer incidents and associated impacts;
d)   provide for clearer, more assured and relevant H&S information to the ‘right-people’ at the ‘right time’;
e)   reduce costs across the whole lifecycle of the asset.
The exchange and use of H&S information is intended to support:
1)   representation of the nature and characteristics of the project, site, built asset and associated activities;
2)   representation of H&S hazards, risks and associated factors;
3)   the generalization, dissemination and re-use of H&S knowledge and experience.
This document is applicable to individuals and organizations that contribute to and influence the definition of design, construction, use (including maintenance) and end of life of a built asset.
This standard is intended to address information management at a stage of maturity described as “building information modelling” (BIM according to the ISO 19650 series. However, the principles and requirements of this document can be applied equally to non-BIM projects.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19650-4:2022(Main)
Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 4: Information exchange (ISO 19650-4:2022)
SIST EN ISO 19650-4:2023

This document specifies the detailed process and criteria for decision makings when executing an information exchange as specified by the ISO 19650 series to ensure the quality of the resulting project information model or asset information model. It details the implementation of the concepts in ISO 19650-1 and is applicable to any information exchange within the delivery stages covered by ISO 19650-2 and operational trigger events covered by ISO 19650-3.
This document is applicable to assets of all sizes and all levels of complexity. This includes portfolios of buildings, campuses, infrastructure networks, individual buildings and pieces of infrastructure. The requirements in this document should be applied in a way that is appropriate to the scale and complexity of the asset. This document makes use of the phrase “shall consider”. This phrase is used to introduce a list of items that the person in question is required to think about carefully in connection with the primary requirement described in the subclause. The amount of thought involved, the time taken to complete it, and the need for supporting evidence depend on the complexity of the asset, the experience of the person(s) involved, and the requirements of any national policy on introducing building information modelling. On a relatively small or straightforward asset, it can be possible to complete, or dismiss as not relevant, some of these “shall consider” items very quickly. One way to help identify which of the “shall consider” statements are relevant can be to review each statement and create templates for assets of different sizes and complexity.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 19650-6(Main)
Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 6: Health and safety information (ISO/DIS 19650-6:2023)
oSIST prEN ISO 19650-6:2024

This Document outlines the concepts and principles to ensure that Health and Safety information is developed, shared and managed collaboratively, ensuring the economic, environmental and social benefits are secured.
This Document;
1) specifies requirements for the collaborative sharing of structured H&S information throughout the asset life-cycle.
2) supports the progressive development of structured H&S information for all built assets.
3) provides guidance on how H&S information is produced, flows and can be used throughout the asset lifecycle. Whilst all H&S risk information can be included within an information model, this document requires the contextualization and filtering of hazards and risks to prioritize the elevated risks and aspects that are safety critical.
4) sets out a framework (risk information cycle) for the application of H&S information-use through BIM processes and applications.
This document specifies how to use H&S information in order to:
a)   provide a safer and healthier environment for end-users;
b)   mitigate the inherent hazards and risks across the asset lifecycle;
c)   result in improved H&S performance, fewer incidents and associated impacts;
d)   provide for clearer, more assured and relevant H&S information to the ‘right-people’ at the ‘right time’;
e)   reduce costs across the whole lifecycle of the asset.
The exchange and use of H&S information is intended to support:
1)   representation of the nature and characteristics of the project, site, built asset and associated activities;
2)   representation of H&S hazards, risks and associated factors;
3)   the generalization, dissemination and re-use of H&S knowledge and experience.
This document is applicable to individuals and organizations that contribute to and influence the definition of design, construction, use (including maintenance) and end of life of a built asset.
This standard is intended to address information management at a stage of maturity described as “building information modelling” (BIM according to the ISO 19650 series. However, the principles and requirements of this document can be applied equally to non-BIM projects.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17294-1:2024(Main)
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements (ISO 17294-1:2024)
kSIST FprEN ISO 17294-1:2023

This document specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general requirements for the use of this technique to determine elements in water, digests of sludges and sediments (e.g. digests of water as described in ISO 15587-1 or ISO 15587-2). Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter can be introduced too. This document applies to the use of ICP-MS for aqueous solution analysis.
The ultimate determination of the elements is described in a separate International Standard for each series of elements and matrix. The individual clauses of this document refer the user to these guidelines for the basic principles of the method and the configuration of the instrument.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 683-2:2024(Main)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
kSIST FprEN 683-2:2024

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573 3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573 3, and the temper designations are defined in EN 515.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 81060-2:2019/A2:2024(Amendment)
Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type - Amendment 2 (ISO 81060-2:2018/Amd 2:2024)
SIST EN ISO 81060-2:2020/A2:2024
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16783:2024(Main)
Thermal insulation products - Environmental Product Declarations (EPD) - Product Category Rules (PCR) complementary to EN 15804 for factory made and in-situ formed products
kSIST FprEN 16783:2024

This document provides the product category rules (PCR) for Type III environmental declarations (as in EN 15804:2012+A2:20191) for factory made and in situ thermal insulation products.
Complementary to EN 15804:2012+A2:20191, the PCR described in this document:
-   specify the declared unit to be used;
-   define the system boundaries for thermal insulation products;
-   specify/describe the default scenarios and rules for defining scenarios for certain life cycle information modules.
These PCR are intended to be used for cradle to gate, cradle to gate with options or cradle to grave assessment, provided the intention is properly stated in the system boundary description.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day