91.010 - Construction industry

This document provides the opportunity to add information about the contents of a container by further specializing the generic types of links specified in ISO 21597-1. The defined link types have been chosen to enhance the use of the container by allowing the addition of semantic relationships that are human interpretable to provide greater clarity about those links.

1.1   Scope of CEN/TS 17440
(1)This document provides additional or amended provisions to EN 1990 to cover the assessment of existing structures (see EN 1990:2002, 1.1(4)), and the retained parts of existing structures that are being modified, extended, strengthened or retrofitted.
NOTE 1   The assessment of an existing structure is, in many aspects, different from the design of a new structure, see Introduction.
NOTE 2   There can be some aspects of EN 1990 that are required for design but are not...view more

This International standard sets out the concepts, principles and the general structure for product data templates for products used in construction works. This general structure can be used to describe any product, e.g. in the domains of construction products, mechanical products, electrical products, plumbing products, and HVAC products.
This standard gives the specification of a taxonomy model based on ISO 12006-3 Building construction -- Organization of information about construction work...view more

This proposed ISO standard will specify requirements for the security-minded management of projects utilizing digital technologies, associated control systems, for example building management systems, digital built environments and smart asset management. It outlines security threats to information during asset:.
• conception, strategy and briefing;
• procurement;
• design;
• construction;
• commissioning and handover;
• operation and maintenance;
• performance management;
• change of us...view more

The scope of this guidance is deliberately restricted only to refer to EN ISO 19650-1 and -2, highlighting and describing the manner in which to use it -and not extending or contradicting the scope and content of the standard  The document aims simply to provide minimum supporting text to achieve a basic understanding and ability to implement EN ISO 19650-1 and -2. In each country, each client, each team can use this guidance to provide the best response to information management in each project...view more

This new Standard will specify requirements for information management in relation to the operation and maintenance of assets (buildings and infrastructure)
It will cover the information management processes to:
a)    establish an asset breakdown structure and data dictionary;
b)    establish and fulfil the organization’s requirements for information throughout the operational phase of an asset and for operational information throughout the delivery phase of an asset;
c)    create an asset informa...view more

This document provides an index of typical existing information on concept, disaster risk and countermeasure for resilience of buildings and civil engineering works.

This document specifies requirements for information management, in the form of a management process, within the context of the operational phase of assets and the exchanges of information within it, using building information modelling. This document can be applied to all types of assets and by organizations of all types and sizes involved in the operational phase of assets. The requirements in this document can be achieved through direct actions carried out by the organization in question or c...view more

This document sets out the principles and structure for data templates for construction objects. It is developed to support digital processes using machine-readable formats using a standard data structure to exchange information about any type of construction object, e.g. product, system, assembly, space, building etc., used in the inception, brief, design, production, operation and demolition of facilities. This document provides the specification of a taxonomy model that defines concepts from ...view more

This document defines an open and stable container format to exchange files of a heterogeneous nature
to deliver, store and archive documents that describe an asset throughout its entire lifecycle.
It is suitable for all parties dealing with information concerning the built environment, where there is
a need to exchange multiple documents and their interrelationships, either as part of the process or
as contracted deliverables. The format is intended to use resources either included in the c...view more

This Guide sets out the rules for the drafting and presentation of candidate harmonized European Standards (hENs) for construction products drafted in the framework of Regulation (EU) 305/2011 (Construction Products Regulation).
This Guide gives rules which are additional to the CEN-CENELEC Internal Regulations - Part 3 (based on ISO/IEC Directives, Part 2) when this is necessary because of the special provisions of harmonized product standards in the construction sector.
This Guide applies to...view more

This document specifies the principles and requirements for security-minded information management at a stage of maturity described as "building information modelling (BIM) according to the ISO 19650 series", and as defined in ISO 19650-1, as well as the security-minded management of sensitive information that is obtained, created, processed and stored as part of, or in relation to, any other initiative, project, asset, product or service. It addresses the steps required to create and cultivate ...view more

This European standard establishes the rules for defining properties used in construction and a methodology for authoring and maintaining them, for a confident and seamless digital share between stakeholders.
Regarding definition of properties, it provides:
•   rules of definitions of properties
•   definition of property’s attributes
Regarding authoring and maintaining process, it provides:
•   definition of request’s attributes
•   definition and role of experts;
•   a governance model t...view more

This document defines an open and stable container format to exchange files of a heterogeneous nature to deliver, store and archive documents that describe an asset throughout its entire lifecycle. It is suitable for all parties dealing with information concerning the built environment, where there is a need to exchange multiple documents and their interrelationships, either as part of the process or as contracted deliverables. The format is intended to use resources either included in the conta...view more

This document provides product category rules (PCR) for Type III environmental declarations for windows and pedestrian doorsets as defined in EN 14351-1 and EN 14351-2. Windows and pedestrian doorsets additionally providing fire resistance and/or smoke control characteristics according to EN 16034 are also covered by this document.
NOTE 1   Windows that incorporate shutters and/or shutter boxes and/or blinds are in scope of this PCR. For any connected electrical devices (e.g. motors, sensors) -se...view more

ISO 12006-2:2015 defines a framework for the development of built environment classification systems. It identifies a set of recommended classification table titles for a range of information object classes according to particular views, e.g. by form or function, supported by definitions. It shows how the object classes classified in each table are related, as a series of systems and sub-systems, e.g. in a building information model.
ISO 12006-2:2015 does not provide a complete operational clas...view more

ISO 12006-2:2015 defines a framework for the development of built environment classification systems. It identifies a set of recommended classification table titles for a range of information object classes according to particular views, e.g. by form or function, supported by definitions. It shows how the object classes classified in each table are related, as a series of systems and sub-systems, e.g. in a building information model.
ISO 12006-2:2015 does not provide a complete operational clas...view more

This European standard provides core product category rules (PCR) for Type III environmental declarations for any construction product and construction service.
NOTE   The assessment of social and economic performances at product level is not covered by this standard.
The core PCR:
-   defines the parameters to be declared and the way in which they are collated and reported,
-   describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the...view more