91.010.99 - Other aspects

This document provides product category rules (PCR) for Type III environmental declarations for windows and pedestrian doorsets as defined in EN 14351-1 and EN 14351-2. Windows and pedestrian doorsets additionally providing fire resistance and/or smoke control characteristics according to EN 16034 are also covered by this document.
NOTE 1   Windows that incorporate shutters and/or shutter boxes and/or blinds are in scope of this PCR. For any connected electrical devices (e.g. motors, sensors) -se...view more

This European standard provides core product category rules (PCR) for Type III environmental declarations for any construction product and construction service.
NOTE   The assessment of social and economic performances at product level is not covered by this standard.
The core PCR:
-   defines the parameters to be declared and the way in which they are collated and reported,
-   describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the...view more

The general scope of the core product category rules (PCR) is given in EN 15804:2012+A1:2013, Clause 1.
This PCR is primarily intended for the creation of cradle-to-gate EPDs of cement and building lime.
In other respects, the scope is as in EN 15804.

This Technical Report (TR) has been developed by CEN/TC 350/WG 1 and WG 3 to provide a clear and structured view on the relevance, robustness and applicability of a predefined set of additional impact categories and related indicators for the assessment of the environmental performance of construction works, construction products and building materials.
The TR describes the evaluation criteria that are used to determine, for these impact categories, the suitability of indicators and calculation...view more

This Technical Report (TR) has been developed by CEN/TC 350/WG 1 and WG 3 to provide a clear and structured view on the relevance, robustness and applicability of a predefined set of additional impact categories and related indicators for the assessment of the environmental performance of construction works, construction products and building materials.
The TR describes the evaluation criteria that are used to determine, for these impact categories, the suitability of indicators and calculation...view more

This Technical Report provides general guidance to the users of EN 15804 and those preparing complementary Product Category Rules (c-PCR's) by:
—   stating general principles for the use of EN 15804 by CEN Technical Committees for construction products (Product TC's) in order to ensure consistency among the complementary PCR produced by Product TC's;
—   addressing the questions raised by Product TC's, manufacturers or their sub-contractors who provide LCA studies underlying an Environmental Prod...view more

Standard je namenjen prostorskim načrtovalcem kot eno od izhodišč za načrtovanje odprtega
prostora, dostopnega za vse uporabnike. Z upoštevanjem standarda se lahko izboljša gibanje ljudi z
okvarami vida, posledično pa tudi njihova samostojnost in kakovost življenja. Standard temelji na
nacionalnih in mednarodnih dokumentih, ki predvidevajo enakopravnost vseh ljudi ne glede na njihove
različne sposobnosti in zmožnosti. Dostopnost grajenega okolja je eden od ključnih vidikov, ki lahko to
enak...view more

This European Standard provides general Product Category Rules (PCR) for Type III environmental declarations for wood and wood-based products for use in construction and related construction and in-service processes.
This European Standard complements the core rules for the product category of construction products as defined in EN 15804 and is intended to be used in conjunction with EN 15804.
NOTE    The assessment of social and economic performances at product level is not covered by this stan...view more

This Technical Report supports the development of Environmental Product Declarations (EPD).
It assists in using generic data according to the core product category rules (prEN 15804) during the preparation of EPD of construction products, processes and services in a consistent way, and also in the application of generic data in the environmental performance assessment of buildings according to prEN 15978.
The requirements for the use of generic data are described in prEN 15804.

This Technical Report sets out recommendations for achieving acceptable levels of health and safety with temporary works equipment intended for use during construction or maintenance of buildings and other permanent structures. Its recommendations should be considered when writing standards for designing and producing temporary works equipment under CEN/TC 53.

This document is applicable to all construction products and services related to buildings and construction works. It specifies and describes the communication format for the information defined in EN 15804 for business-to-business communication to ensure a common understanding through consistent communication of information.
NOTE   This document does not deal with business to consumer communication and is not intended for that purpose. Business to consumer communication format is planned to be t...view more

This document is applicable to all construction products and services related to buildings and construction works. It specifies and describes the communication format for the information defined in EN 15804 for business-to-business communication to ensure a common understanding through consistent communication of information.
NOTE   This document does not deal with business to consumer communication and is not intended for that purpose. Business to consumer communication format is planned to be t...view more

Identical to EN 15804+A1 amendment to add additional indicators. Indicators could be : - land use (biodiversity, soil quality), - particulate matter (PM 10), - human tox, - eco tox, - ionizing radiation, - water scarcity, Note oft he secretary: - If it turns out that it is not feasible to have additional indicators a justification has to be developed. - For each indicator this applicability or not should be indicating and justify - Coordination with WG1 - jwg meeting planned however perspective ...view more

This standard is applicable to building products, processes and services. The product category rules specify requirements for all building products in accordance with ISO 21930 (proposed to be implemented as EN ISO 21930 in another Work Item) and ISO 14025 for the intended audience whether business or consumers. This standard supports the application of environmental product declarations for the assessment of the environmental performance of buildings and for the assessment of the health & comfo...view more

This European standard provides core product category rules (PCR) for Type III environmental declarations for any construction product and construction service. NOTE The assessment of social and economic performances at product level is not covered by this standard. The core PCR: - defines the parameters to be declared and the way in which they are collated and reported, - describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the lif...view more