EN ISO 14744-2:2000
(Main)Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics (ISO 14744-2:2000)
Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics (ISO 14744-2:2000)
This standard is intended for use when the characteristics of the accelerating voltage of electron beam welding machines complying with prEN ISO 14744-1 is to be measured in connection with an acceptance inspection. It provides essential information on the procedure and apparatus to be used for making the measurements. The accelerating voltage is one of the significant parameters in electron beam welding. When accelerating the electrons, the voltage should be stable and reproductible within given short-term and long-term limits.
Schweißen - Abnahmeprüfung von Elektronenstrahl-Schweißmaschinen - Teil 2: Messen der Beschleunigungsspannung-Kenngrößen (ISO 14744-2:2000)
Diese Norm ist für das Messen der Beschleunigungsspannungs-Kenngrößen bei Abnahmeprüfungen von Elektronenstrahl-Schweißmaschinen nach prEN ISO 14744-1 anzuwenden. Sie enthält wesentliche Informationen zum Verfahren und zu Geräten für die Durchführung der Messungen. Die Beschleunigungsspannung gehört zu den wichtigsten Parametern beim Elektronenstrahlschweißen. Die Spannung sollte die Elektronen innerhalb definierter Kurz- und Langzeitabweichungen daher gleichmäßig und reproduzierbar beschleunigen.
Soudage - Essais de réception des machines de soudage par faisceau d'électrons - Partie 2: Mesure des caractéristiques de la tension d'accélération (ISO 14744-2:2000)
La présente norme internationale a pour but d'être utilisée lorsque les caractéristiques de la tension d'accélération de machines de soudage par faisceau d'électrons en conformité avec l'ISO 14744-1 sont à mesurer dans le cadre d'essais de réception. Elle fournit des informations essentielles sur le mode opératoire et les appareillages à utiliser pour réaliser de telles mesures. La tension d'accélération est un des paramètres importants en soudage par faisceau d'électrons. Lors de l'accélération des électrons, il convient que la tension soit stable et reproductible, en restant dans des limites à court terme et à long terme données. Ainsi, l'objet de la mesure est de vérifier si les variations de la tension d'accélération sont comprises dans des limites spécifiées.
Varjenje - Prevzemni preskusi strojev za varjenje z elektronskim snopom - 2. del: Merjenje značilnosti pospeševalne napetosti (ISO 14744-2:2000)
General Information
- Status
- Published
- Publication Date
- 14-Apr-2000
- Withdrawal Date
- 30-Oct-2000
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/SC 4 - Quality management in the field of welding
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 14-Jun-2005
- Completion Date
- 14-Jun-2005
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
EN ISO 14744-2:2000 is a crucial standard issued by CEN that addresses the acceptance inspection of electron beam welding machines, specifically focusing on the measurement of accelerating voltage characteristics. This document complements the requirements outlined in prEN ISO 14744-1 by detailing the procedures and apparatus necessary for accurately assessing the stability and reproducibility of the accelerating voltage in electron beam welding machines.
The accelerating voltage is a fundamental parameter in electron beam welding, directly influencing the quality and precision of welds. The standard ensures that these machines maintain voltage consistency within specified short-term and long-term limits, securing optimal welding performance and operational reliability.
Key Topics
Accelerating Voltage Measurement
Guidance on how to measure the accelerating voltage characteristics accurately during the acceptance inspection of electron beam welding equipment.Stability and Reproducibility Criteria
Defines the required limits for short-term and long-term voltage stability to guarantee consistent welding operation.Inspection Procedures
Detailed methodology for performing tests using specified apparatus to ensure compliance with voltage characteristic requirements.Compatibility with EN ISO 14744-1
The standard is designed as a part two complement, enhancing the inspection process for machines that meet the first part’s general requirements.
Applications
Electron Beam Welding Equipment Validation
Used by manufacturers and quality assurance teams to validate the performance of electron beam welding machines before commissioning or delivery.Quality Control in Manufacturing
Ensures electron beam welders operate consistently within defined parameters, supporting high-quality welds in aerospace, automotive, and precision engineering industries.Maintenance and Calibration
Provides benchmarks for periodic voltage measurement, helping maintenance personnel assess machine condition and recalibrate equipment as necessary.Acceptance Inspection
A vital component for acceptance testing protocols, facilitating compliance verification against safety and performance criteria stipulated in industry contracts.
Related Standards
EN ISO 14744-1 – Electron beam welding - General acceptance inspection of electron beam welding machines. This standard provides foundational requirements related to machine design and component inspection, which EN ISO 14744-2 builds upon by focusing on voltage measurement specifics.
IEC 60974 Series – Welding equipment standards related to power sources and control systems, which complement the voltage characteristic requirements in the electron beam welding context.
ISO 3834 – Quality requirements for fusion welding of metallic materials, which often encompasses electron beam welding quality assurance processes including inspection procedures.
By following EN ISO 14744-2:2000, organizations involved in electron beam welding can ensure their welding machines meet stringent criteria for accelerating voltage stability and reproducibility, crucial for achieving consistent weld quality and long-term machine reliability. This standard supports industry-wide best practices and compliance in specialized welding equipment inspection and measurement.
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN ISO 14744-2:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics (ISO 14744-2:2000)". This standard covers: This standard is intended for use when the characteristics of the accelerating voltage of electron beam welding machines complying with prEN ISO 14744-1 is to be measured in connection with an acceptance inspection. It provides essential information on the procedure and apparatus to be used for making the measurements. The accelerating voltage is one of the significant parameters in electron beam welding. When accelerating the electrons, the voltage should be stable and reproductible within given short-term and long-term limits.
This standard is intended for use when the characteristics of the accelerating voltage of electron beam welding machines complying with prEN ISO 14744-1 is to be measured in connection with an acceptance inspection. It provides essential information on the procedure and apparatus to be used for making the measurements. The accelerating voltage is one of the significant parameters in electron beam welding. When accelerating the electrons, the voltage should be stable and reproductible within given short-term and long-term limits.
EN ISO 14744-2:2000 is classified under the following ICS (International Classification for Standards) categories: 25.160 - Welding, brazing and soldering. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 14744-2:2000 has the following relationships with other standards: It is inter standard links to EN ISO 14744-3:2000, EN ISO 14744-1:2008, EN 4677-001:2012, EN 1011-7:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 14744-2:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2001
9DUMHQMH3UHY]HPQLSUHVNXVLVWURMHY]DYDUMHQMH]HOHNWURQVNLPVQRSRPGHO
0HUMHQMH]QDþLOQRVWLSRVSHãHYDOQHQDSHWRVWL ,62
Welding - Acceptance inspection of electron beam welding machines - Part 2:
Measurement of accelerating voltage characteristics (ISO 14744-2:2000)
Schweißen - Abnahmeprüfung von Elektronenstrahl-Schweißmaschinen - Teil 2: Messen
der Beschleunigungsspannung-Kenngrößen (ISO 14744-2:2000)
Soudage - Essais de réception des machines de soudage par faisceau d'électrons -
Partie 2: Mesure des caractéristiques de la tension d'accélération (ISO 14744-2:2000)
Ta slovenski standard je istoveten z: EN ISO 14744-2:2000
ICS:
25.160.30 Varilna oprema Welding equipment
2003-01.Slovenski inštitut
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...