EN 1504-10:2003

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beuteilung der Konformität - Teil 10: Anwendung von Produkten und Systemen auf der Baustelle, Qualitätsüberwachung der AusführungProduits et systemes pour la protection et la réparation de structures en béton - Définitions, prescriptions, maîtrise de la qualité et évaluation de la conformité - Partie 10: Application sur site des produits et systemes et contrôle de la qualité des travauxProducts and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works91.080.40Betonske konstrukcijeConcrete structures01.040.91Gradbeni materiali in gradnja (Slovarji)Construction materials and building (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 1504-10:2003SIST EN 1504-10:2004en01-april-2004SIST EN 1504-10:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1504-10December 2003ICS 91.080.40; 01.040.91English versionProducts and systems for the protection and repair of concretestructures - Definitions - Requirements - Quality control andevaluation of conformity - Part 10: Site application of productsand systems and quality control of the worksProduits et systèmes pour la protection et la réparation destructures en béton - Définitions, prescriptions, maîtrise dela qualité et évaluation de la conformité - Partie 10:Application sur site des produits et systèmes et contrôle dela qualité des travauxProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Definitionen,Anforderungen, Qualitätsüberwachung und Beuteilung derKonformität - Teil 10: Anwendung von Produkten undSystemen auf der Baustelle, Qualitätsüberwachung derAusführungThis European Standard was approved by CEN on 28 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1504-10:2003: ESIST EN 1504-10:2004

1)currently under preparationSIST EN 1504-10:2004

Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity,quantity and size of common types of defect - Part 6: Rating of degree of chalking by tape method (ISO 4628-6:1990).EN ISO 8501–1, Preparation of steel substrates before application of paints or related products - Visualassessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrate and ofsteel substrate after overall removal of previous coatings (ISO 8501-1:1988).EN ISO 8501-1, Supplement to Part 1, Preparation of steel substrates before application of paints or relatedproducts - Visual assessment of surface cleanliness – Informative Supplement to Part 1: Representativephotographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives(ISO 8501-1:1988/Suppl:1994).ENV ISO 8502-1, Preparation of steel substrates before application of paints or related products – Tests for theassessment of surface cleanliness – Part 1: Field test for soluble iron corrosion products (ISO/TR 8502-1:1991).SIST EN 1504-10:2004
...