EN ISO 15614-12:2004
(Main)Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2004)
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2004)
ISO 15614-12:2004 specifies the tests which may be used for qualification of welding procedure specifications for spot, seam and projection welding processes.
ISO 15614-12:2004 defines the conditions for carrying out tests and the limits of validity of a qualified welding procedure for all practical welding operations covered by this International Standard.
Tests shall be carried out in accordance with this International Standard unless more severe tests are specified by the relevant application standard or contract when these shall apply.
The acceptability of applying the principles of this International Standard to other resistance welding processes should be established before any qualification is undertaken.
ISO 15614-12:2004 covers the following resistance welding processes:
- spot welding;
- indirect spot welding;
- direct spot welding;
- seam welding;
- lap seam welding;
- mash seam welding;
- fail butt-seam welding;
- seam welding with strip;
- projection welding;
- indirect projection welding;
- direct projection welding.
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißverfahrensprüfung - Teil 12: Widerstandspunkt-, Rollennaht- und Buckelschweißen (ISO 15614-12:2004)
Diese Norm legt fest, wie eine Schweißanweisung durch Schweißverfahrensprüfungen anerkannt wird.
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Epreuve de qualification d'un mode opératoire de soudage - Partie 12: Soudage par points, à la molette et par bossages (ISO 15614-12:2004)
L'ISO 15614-12:2004 spécifie les épreuves qui peuvent être utilisées pour la qualification de descriptifs de modes opératoires de soudage.
L'ISO 15614-12:2004 définit les conditions de déroulement des épreuves et les limites de validité d'un mode opératoire de soudage qualifié pour toutes les opérations de soudage effectuées en pratique et qui sont couvertes par l'ISO 15614-12:2004.
Les contrôles, examens et essais doivent être réalisés conformément à l'ISO 15614-12:2004, sauf lorsque des contrôles, examens et essais plus sévères sont spécifiés par la norme d'application correspondante ou le contrat devant être appliqués.
Il convient de définir la possibilité d'appliquer les principes de l'ISO 15614-12:2004 à d'autres procédés de soudage par résistance avant d'entreprendre toute qualification.
L'ISO 15614-12:2004 couvre les procédés de soudage par résistance suivants:
soudage par résistance par points;
soudage indirect par résistance par points;
soudage direct par résistance par points;
soudage à la molette;
soudage à la molette par recouvrement;
soudage à la molette par écrasement;
soudage en bout à la molette avec feuillard;
soudage à la molette avec feuillard;
soudage par bossages;
soudage indirect par bossages;
soudage direct par bossages.
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus postopka varjenja - 12. del: Točkovno, kolutno in projekcijsko varjenje (ISO 15614-12:2004)
General Information
- Status
- Withdrawn
- Publication Date
- 31-Jul-2004
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/SC 4 - Quality management in the field of welding
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 02-Jul-2014
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 09-Jul-2014
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN ISO 21049:2004 - Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004) - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN ISO 15614-12:2004 is a standard published by the European Committee for Standardization (CEN). Its full title is "Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2004)". This standard covers: ISO 15614-12:2004 specifies the tests which may be used for qualification of welding procedure specifications for spot, seam and projection welding processes. ISO 15614-12:2004 defines the conditions for carrying out tests and the limits of validity of a qualified welding procedure for all practical welding operations covered by this International Standard. Tests shall be carried out in accordance with this International Standard unless more severe tests are specified by the relevant application standard or contract when these shall apply. The acceptability of applying the principles of this International Standard to other resistance welding processes should be established before any qualification is undertaken. ISO 15614-12:2004 covers the following resistance welding processes: - spot welding; - indirect spot welding; - direct spot welding; - seam welding; - lap seam welding; - mash seam welding; - fail butt-seam welding; - seam welding with strip; - projection welding; - indirect projection welding; - direct projection welding.
ISO 15614-12:2004 specifies the tests which may be used for qualification of welding procedure specifications for spot, seam and projection welding processes. ISO 15614-12:2004 defines the conditions for carrying out tests and the limits of validity of a qualified welding procedure for all practical welding operations covered by this International Standard. Tests shall be carried out in accordance with this International Standard unless more severe tests are specified by the relevant application standard or contract when these shall apply. The acceptability of applying the principles of this International Standard to other resistance welding processes should be established before any qualification is undertaken. ISO 15614-12:2004 covers the following resistance welding processes: - spot welding; - indirect spot welding; - direct spot welding; - seam welding; - lap seam welding; - mash seam welding; - fail butt-seam welding; - seam welding with strip; - projection welding; - indirect projection welding; - direct projection welding.
EN ISO 15614-12:2004 is classified under the following ICS (International Classification for Standards) categories: 25.160.10 - Welding processes. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 15614-12:2004 has the following relationships with other standards: It is inter standard links to EN ISO 15614-12:2014, EN ISO 14271:2017, EN ISO 15609-5:2011, EN ISO 14732:2025, EN ISO 14270:2016, EN ISO 17653:2012, EN ISO 14272:2016, EN ISO 15607:2003, EN ISO 14273:2016, EN ISO 9241-410:2008/A1:2012, EN 13814:2004, EN ISO 21049:2004, EN ISO 13710:2004, EN 3-8:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 15614-12:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2004
3RSLVLQNYDOLILNDFLMDYDULOQLKSRVWRSNRY]DNRYLQVNHPDWHULDOH3UHVNXVSRVWRSND
YDUMHQMDGHO 7RþNRYQRNROXWQRLQSURMHNFLMVNRYDUMHQMH ,62
Specification and qualification of welding procedures for metallic materials - Welding
procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2004)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißverfahrensprüfung - Teil 12: Widerstandspunkt-, Rollennaht- und
Buckelschweißen (ISO 15614-12:2004)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Epreuve de qualification d'un mode opératoire de soudage - Partie 12:
Soudage par points, a la molette et par bossages (ISO 15614-12:2004)
Ta slovenski standard je istoveten z: EN ISO 15614-12:2004
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...