iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13002-2:1999

(Main)

Carbon fibre yarns - Part 2: Test methods and general specifications

Carbon fibre yarns - Part 2: Test methods and general specifications

This standard is applicable to high-performance, high modulus carbon fibre filament yarns as defined in material standards. The carbon fibre filament yarns are used for manufacturing semi-finished products and for reinforcing metallic, plastic and ceramic parts. Polyacrylonitrile, pitch or viscose filament yarns are used as precursor which are transformed into carbon fibre filament yarns by controlled pyrolysis.

Kohlenstoffilamentgarne - Teil 2: Prüfverfahren und allgemeine Festlegungen

Diese Norm gilt für Filamentgarne hoher Festigkeit und mit hohem Elastizitätsmodul nach Werkstoffnormen angewendet. Die Kohlenstoffilamentgarne werden für die Herstellung von Halbzeug und zur Verstärkung von Teilen aus Metallen, Kunststoffen und keramischen Werkstoffen verwendet. Als Ausgangsmaterial dienen Filamentgarne aus Polyacrylnitril, Pech oder Viskose, die durch eine gesteuerte Pyrolyse in Kohlenstoffilamentgarne überführt werden.

Fils de carbone - Partie 2: Méthodes d'essais et spécifications générales

Cette norme est applicable aux fils réalisés à partir de fibres de carbone, haute performance, haut module, définis dans la nome européenne de matériaux. Les fibres de carbone sont utilisées pour fabriquer des semi-produits et pour renforcer des pièces métalliques, plastiques et céramiques. Les fibres de polyacrilonitrile de brai ou de viscose sont utilisées comme précurseur. Elles sont transformées en fibre de carbone par pyrolyse contrôlée.

Preje iz ogljikovih vlaken - 2. del: Preskusne metode in splošne specifikacije

General Information

Status
Withdrawn
Publication Date
20-Apr-1999
Withdrawal Date
19-Feb-2013
ICS
59.100.20 - Carbon materials
Technical Committee
CEN/TC 249 - Plastics
Drafting Committee
CEN/TC 249/SC 2/WG 1 - Reinforcements
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
20-Feb-2013
Completion Date
20-Feb-2013
Ref Project
SIST EN 13002-2:2000 - Carbon fibre yarns - Part 2: Test methods and general specifications

Buy Standard

EN 13002-2:2000EN 13002-2:2000
PreviousNext
Standard
EN 13002-2:2000
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preje iz ogljikovih vlaken - 2. del: Preskusne metode in splošne specifikacijeKohlenstoffilamentgarne - Teil 2: Prüfverfahren und allgemeine FestlegungenFils de carbone - Partie 2: Méthodes d'essais et spécifications généralesCarbon fibre yarns - Part 2: Test methods and general specifications59.1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 10548:2003/AC:2009(Corrigendum)
Carbon fibre - Determination of size content (ISO 10548:2002/Cor 1:2008)
SIST EN ISO 10548:2003/AC:2009

ISO - Taking over of an ISO Technical Corrigendum

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10618:2004(Main)
Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004)
SIST EN ISO 10618:2004

ISO 10618:2004 specifies a method of test for the determination of the tensile strength, tensile modulus of elasticity and strain at maximum load of a resin-impregnated yarn specimen. The method is applicable to yarns (continuous and staple-fibre yarns) of carbon fibre for use as reinforcements in composite materials.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10548:2003(Main)
Carbon fibre - Determination of size content (ISO 10548:2002)
SIST EN ISO 10548:2003

ISO 10548 specifies test methods for the determination of the size content of carbon fibre yarn. It is applicable to continuous-filament yarns and staple-fibre yarns.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13002:1998(Main)
Carbon fibre - Designation system for filament yarns (ISO 13002:1998)
SIST EN ISO 13002:2000

1.1 This International Standard establishes a system of designation for filament yarns of carbon fibre which may be used as the basis for specifications.
1.2 This designation system is applicable to filament yarns used for the reinforcement of polymer composites.
It does not apply to discontinuous fibre products pyrolized in the form of staple yarns, woven fabrics, braids, knits,
mats, etc.
1.3 The types of filament yarns are differentiated from each other by a classification system based on appropriate levels of the designatory properties:
a) tensile modulus of elasticity;
b) tensile strength;
c) linear density.
1.4 It is not intended to imply that materials having the same designation give the same performance. This International Standard does not provide engineering data, performance data or data on processing conditions which may be required to specify a material for a particular application and/or method of processing.
1.5 In order to specify a filament yarn for a particular application or to ensure reproducible processing, additional
requirements may be given in data block 3 (see clause 3).

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10548:2003/AC:2009(Corrigendum)
Carbon fibre - Determination of size content (ISO 10548:2002/Cor 1:2008)
SIST EN ISO 10548:2003/AC:2009

ISO - Taking over of an ISO Technical Corrigendum

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10618:2004(Main)
Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004)
SIST EN ISO 10618:2004

ISO 10618:2004 specifies a method of test for the determination of the tensile strength, tensile modulus of elasticity and strain at maximum load of a resin-impregnated yarn specimen. The method is applicable to yarns (continuous and staple-fibre yarns) of carbon fibre for use as reinforcements in composite materials.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10548:2003(Main)
Carbon fibre - Determination of size content (ISO 10548:2002)
SIST EN ISO 10548:2003

ISO 10548 specifies test methods for the determination of the size content of carbon fibre yarn. It is applicable to continuous-filament yarns and staple-fibre yarns.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13002:1998(Main)
Carbon fibre - Designation system for filament yarns (ISO 13002:1998)
SIST EN ISO 13002:2000

1.1 This International Standard establishes a system of designation for filament yarns of carbon fibre which may be used as the basis for specifications.
1.2 This designation system is applicable to filament yarns used for the reinforcement of polymer composites.
It does not apply to discontinuous fibre products pyrolized in the form of staple yarns, woven fabrics, braids, knits,
mats, etc.
1.3 The types of filament yarns are differentiated from each other by a classification system based on appropriate levels of the designatory properties:
a) tensile modulus of elasticity;
b) tensile strength;
c) linear density.
1.4 It is not intended to imply that materials having the same designation give the same performance. This International Standard does not provide engineering data, performance data or data on processing conditions which may be required to specify a material for a particular application and/or method of processing.
1.5 In order to specify a filament yarn for a particular application or to ensure reproducible processing, additional
requirements may be given in data block 3 (see clause 3).

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12625-5:2024(Main)
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2024)
SIST EN ISO 12625-5:2024

This document specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.
Currently, two types of tensile-strength-testing apparatus are commercially available, one where the test piece is positioned vertically and, for the other, horizontally. This document applies for both. For vertical tensile-strength-testing apparatus, a device that is held in the lower grip of the tensile-strength-testing apparatus, called a Finch Cup, is used to achieve the wetting. For horizontal tensile-strength-testing apparatus, the soaking device is placed between the two clamps.
This document is not applicable to cases where impurities and contraries are determined.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 5601:2024(Main)
Paints and varnishes - Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content - Best practices for the selection of test methods (ISO/TR 5601:2023)
kSIST-TP FprCEN ISO/TR 5601:2024

This document aims to enable users to identify an appropriate method for the determination of volatile organic compounds (VOC) content and/or the semi-volatile organic compounds (SVOC) content of coating materials and their raw materials. This document provides a step-by-step procedure for identifying appropriate tests. This document is intended to be used in conjunction with ISO 11890-1, ISO 11890-2 and ISO 17895, to help users select an appropriate analytical method for their analytical problem.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day