CR 13846:2000
(Main)Recommendations to preserve and extend sludge utilization and disposal routes
- BACK
- 21-Mar-2000
- 16-Jun-2020
- 13.030.20
- 13.060.30
- CEN/TC 308
Recommendations to preserve and extend sludge utilization and disposal routes
No scope available
Priporočila za ohranitev in širšo uporabo blata in načinov odlaganja
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2001
3ULSRURþLOD]DRKUDQLWHYLQãLUãRXSRUDEREODWDLQQDþLQRYRGODJDQMD
Recommendations to preserve and extend sludge utilization and disposal routes
Ta slovenski standard je istoveten z: CR 13846:2000
ICS:
13.030.20 7HNRþLRGSDGNL%ODWR Liquid wastes. Sludge
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
------------
...
This May Also Interest You
ISO 5667-13:2011 gives guidance on the sampling of sludges from wastewater treatment works, water treatment works and industrial processes. It is applicable to all types of sludge arising from these works and also to sludges of similar characteristics, e.g. septic tank sludges. Guidance is also given on the design of sampling programmes and techniques for the collection of samples.
- Standard33 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Apr-2011
- 29-Nov-2011
- 13.030.20
- 13.060.30
- 13.060.45
- CEN/TC 308
ISO 5667-13:2011 gives guidance on the sampling of sludges from wastewater treatment works, water treatment works and industrial processes. It is applicable to all types of sludge arising from these works and also to sludges of similar characteristics, e.g. septic tank sludges. Guidance is also given on the design of sampling programmes and techniques for the collection of samples.
- Standard33 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Apr-2011
- 29-Nov-2011
- 13.030.20
- 13.060.30
- 13.060.45
- CEN/TC 308
This document specifies an open and extensible standard for residential, commercial, and industrial control and automation applications using the EN 14908-1 control network protocol and related protocols (EN 14908-2 to EN 14908-9) to provision and manage IoT devices, to access and update data from the devices, and to aggregate data from diverse devices and protocols for delivery to external applications and services.
The web services as specified in this document are implemented on a central gateway or edge server that communicates with multiple sensor, actuator, and controller edge devices using one or more edge protocols such as EN 14908-1, and also interfaces with one or more enterprise and cloud services or applications.
- Draft452 pagesEnglish languagesale 10% offe-Library read for×1 day
- 01-Apr-2025
- 35.240.67
- 91.140.01
- 97.120
- CEN/TC 247
This document specifies the general requirements of data exchange and interfaces for thermal energy meters.
This document is applicable to unidirectionally and bidirectionally transmitting thermal energy meters.
This document applies also to networks with up to 250 meters, for which a master unit with AC mains supply is necessary to control the M-Bus. In these cases, the document is only applicable in conjunction with EN 13757-2 (physical and link layer) and EN 13757-3 (application layer).
For wireless thermal energy meter communications, this document is only applicable in conjunction with EN 13757-4, which describes several alternatives of walk/drive-by readout via a mobile station or by using stationary receivers or a network.
NOTE Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The meter indicates thermal energy in legal units.
- Standard17 pagesEnglish languagesale 10% offe-Library read for×1 day
- 01-Apr-2025
- 17.200.10
- CEN/TC 294
This document specifies transport and security services for communication systems for meters, sensors, and actuators, used to provide metering services.
This document specifies secure communication capabilities by design and supports the building of a secure system architecture.
This document is applicable to the protection of consumer data to ensure privacy.
This document is intended to be used with the lower layer specifications determined in the relevant parts of the EN 13757 series.
- Standard91 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies test methods available for the measurement of thermoregulatory properties of textile materials for use in garments and gives guidance on the most suitable methods for selection where choices are available to the user.
This document also establishes classification of the thermoregulatory properties in three performance levels.
This document does not apply to garments or clothing intended to be worn by babies, infants and children whose thermoregulation within the body has not yet been fully developed.
This document does not apply to the thermoregulatory properties of personal protective equipment (PPE) and clothing items or textile products for which a standard already specifies a particular requirement.
This document does not apply also to heated textiles, phase change materials (PCM) and similar smart materials for thermoregulation, for which CEN ISO/TR 23383 can give better guidance.
- Standard24 pagesEnglish languagesale 10% offe-Library read for×1 day
- 01-Apr-2025
- 59.080.30
- CEN/TC 248
This document specifies application services for communication systems for meters, sensors, and actuators, used to provide metering services.
This document specifies application protocols, especially the M-Bus application protocol.
This document is intended to be used with the lower layer specifications determined in the relevant parts of the EN 13757 series.
- Standard120 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies a method using headspace gas chromatography and mass selective spectroscopy (HS-GC-MS) for detection and quantification of benzene in components of textile products.
- Standard11 pagesEnglish languagesale 10% offe-Library read for×1 day
- 01-Apr-2025
- 59.080.01
- 1907/2006
- CEN/TC 248
This document specifies safety requirements relating to materials, construction, performance, packaging and labelling of soother holders.
NOTE 1 See B.1.
It includes test methods for the mechanical and chemical requirements specified.
This document covers products for children from birth to 36 months of age, alike the soothers to which these items are connected to.
This document is intended to provide safety requirements for soother holders. All products that allow the attachment of a soother intended for babies and young children to any other object are included in the scope. The soother holder has a holding device at one end for the soother, a garment fastener that attaches to any other product, e.g. the child’s garment and a connecting device linking these parts. The safety requirements of products that a soother holder attaches to are not considered in this standard.
Where a soother holder is considered to have significant play value, the soother holder is expected to meet the safety requirements for toys as stated in the Toy Directive 2009/48/EC [6] in addition to those in this document.
NOTE 2 See B.2.
- Draft53 pagesEnglish languagesale 10% offe-Library read for×1 day
- 01-Apr-2025
- 97.190
- 2001/95/EC
- M/264
- CEN/TC 252
1.1 This document specifies requirements and tests for LTSF sterilizers, which use a mixture of low temperature steam and formaldehyde as sterilizing agent, and which are working below ambient pressure only.
These sterilizers are primarily used for the sterilization of heat labile medical devices in health care facilities.
1.2 This document specifies minimum requirements:
- for the performance and design of sterilizers intended to deliver an LTSF process capable of sterilizing medical devices;
- for the equipment and controls of these sterilizers which are needed for operation, control and monitoring of the sterilization processes, and which can be used for validation of the sterilization process.
1.3 This document specifies further test equipment and test procedures used to verify conformance of the equipment design and performance specified by this document.
1.4 This document does not specify requirements and tests for decontamination systems for use in rooms, enclosures, or environmental spaces.
- Draft119 pagesEnglish languagesale 10% offe-Library read for×1 day
- 01-Apr-2025
- 11.080.10
- 2017/745
- M/575
- CEN/TC 102
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.