EN 1097-6:2000
(Main)Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
This European Standard specifies methods for the determination of the particle density and water absorption of aggregates. The first five methods are applicable to normal aggregates with a sixth method for lightweight aggregates. The principal methods specified are: a) a wire basket method for aggregates passing a 63 mm sieve but retained on a 31,5 mm sieve; b) pyknometer methods for aggregates passing a 31,5 mm sieve but retained on a 0,063 mm sieve.
Prüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 6: Bestimmung der Rohdichte und der Wasseraufnahme
Diese Europäische Norm legt Verfahren für die Bestimmung der Rohrdichte und Wasseraufnahme von Gesteinskörnungen fest. Die ersten fünf Verfahren sind für übliche Gesteinskörnungen anwendbar, das sechste Verfahren gilt für leichte Gesteinskörnungen. Die wichtigsten festgelegten Verfahren sind: a) ein Drahtkorbverfahren für Gesteinskörnungen, die durch ein 63-mm-Sieb hindurchgehen, jedoch von einem 31,5-mm-Sieb zurückgehalten werden; b) Pyknometer-Verfahren für Gesteinskörnungen, die durch ein 31,5-mm-Sieb hindurchgehen, jedoch von einem 0,063-mm-Sieb zurückgehalten werden.
Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 6: Détermination de la masse volumique réelle et du coefficient d'absorption d'eau
La présente Norme européenne spécifie les méthodes de détermination de la masse volumique réelle et du coeffient d'absorption d'eau des granulats. Les cinq premières méthodes s'appliquent aux granulats courants, la sixième concernant les granulats légers. Les principales méthodes spécifiées sont: a) la méthode du panier en treillis pour les granulats passant au tamis de 63 mm et refusés au tamis de 31,5 mm; b) les méthodes au pycnomètre pour les granulats passant au tamis de 31,5 mm et refusés au tamis de 0,063 mm.
Preskusi mehanskih in fizikalnih lastnosti agregatov - 6. del: Določevanje prostorninske mase zrn in vpijanja vode
General Information
- Status
- Withdrawn
- Publication Date
- 19-Sep-2000
- Withdrawal Date
- 02-Jul-2013
- Technical Committee
- CEN/TC 154 - Aggregates
- Drafting Committee
- CEN/TC 154/SC 6 - Test methods
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 03-Jul-2013
- Completion Date
- 03-Jul-2013
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 23-Mar-2009
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
EN 1097-6:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption". This standard covers: This European Standard specifies methods for the determination of the particle density and water absorption of aggregates. The first five methods are applicable to normal aggregates with a sixth method for lightweight aggregates. The principal methods specified are: a) a wire basket method for aggregates passing a 63 mm sieve but retained on a 31,5 mm sieve; b) pyknometer methods for aggregates passing a 31,5 mm sieve but retained on a 0,063 mm sieve.
This European Standard specifies methods for the determination of the particle density and water absorption of aggregates. The first five methods are applicable to normal aggregates with a sixth method for lightweight aggregates. The principal methods specified are: a) a wire basket method for aggregates passing a 63 mm sieve but retained on a 31,5 mm sieve; b) pyknometer methods for aggregates passing a 31,5 mm sieve but retained on a 0,063 mm sieve.
EN 1097-6:2000 is classified under the following ICS (International Classification for Standards) categories: 91.100.15 - Mineral materials and products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1097-6:2000 has the following relationships with other standards: It is inter standard links to EN 1097-6:2013, EN 15732:2012, EN 14227-2:2013, EN 13242:2002+A1:2007, EN 13055-1:2002, EN 13450:2002, EN 14227-5:2013, EN 14227-3:2013, EN 14227-5:2004, EN 1097-2:2010, EN 13055-2:2004, EN 14227-1:2013, EN 13043:2002, EN 1097-6:2000/A1:2005, EN 1097-6:2000/AC:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1097-6:2000 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/125. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1097-6:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.ORþHYDQMHPrüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 6: Bestimmung der Rohdichte und der WasseraufnahmeEssais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 6: Détermination de la masse volumique réelle et du coefficient d'absorption d'eauTests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 1097-6:2000SIST EN 1097-6:2002en01-septembe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...