EN 15316-4-10:2017
(Main)Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-10: Wind power generation systems, Module M11-8-7
Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-10: Wind power generation systems, Module M11-8-7
This European Standard deals with procedures for the assessment of electricity generation within the direct building environment through wind power systems. The wind power systems described in this document are small plants as they may occur in domestic production and use of electricity in connection with buildings. This standard covers wind generation power systems ≤ 75 kW.
Enegetische Bewertung von Gebäuden - Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 4-10: Windkraftanlagen, Modul M11-8-7
Performance énergétique des bâtiments - Méthode de calcul des besoins énergétiques et des rendements des systèmes - Partie 4-10 : Systèmes de production d’électricité éolienne, Module M11-8-7
La présente Norme européenne définit une méthode permettant d’évaluer la production d’électricité sur site ou à proximité de l’environnement des bâtiments par des systèmes d’énergie éolienne (wind power systems - WPS) et de calculer la performance énergétique de ces systèmes d’énergie éolienne. Les WPS décrits dans le présent document sont des unités de petite taille, adaptées à la production et à l’utilisation urbaine d’électricité dans des bâtiments spécifiques. La présente norme traite des systèmes de production d’énergie éolienne ≤ 75 kW.
La présente norme européenne ne traite ni du dimensionnement ni de l’inspection des WPS.
D’autres systèmes de production sont traités dans d’autres sous-modules de la partie M3-8.
Le Tableau 1 montre la position relative de la présente norme dans l’ensemble des normes PEB, dans le contexte de la structure modulaire définie dans l’ISO 52000 1.
NOTE 1 L’ISO/TR 52000 2 contient le même tableau avec, pour chaque module, les numéros des normes PEB pertinentes et les rapports techniques associés qui ont été publiés ou qui sont en cours de préparation.
NOTE 2 Les modules représentent les normes PEB ; toutefois une même norme PEB peut couvrir plus d’un module et un module peut être couvert par plus d’une norme PEB, comme dans le cas d’une procédure simplifiée et d’une procédure détaillée, respectivement. Voir également l’Article 2 et les Tableaux A.1 et B.1.
Energijske lastnosti stavb - Metoda za izračun energijskih zahtev in učinkovitosti sistema - 4-10. del: Sistemi za izkoriščanje vetrne energije - Modul M11-8-7
Ta standard se ukvarja s postopki za oceno proizvodnje električne energije v neposrednem okolju stavbe preko sistemov vetrnih elektrarn. Sistemi vetrnih elektrarn, opisani v tem dokumentu, so majhne elektrarne, ki se lahko uporabljajo pri gospodinjski proizvodnji in uporabi električne energije v stavbah. Ta standard zajema sisteme vetrnih elektrarn ≤ 75 kW.
General Information
Overview
EN 15316-4-10:2017 - part of the CEN energy performance of buildings (EPB) series - defines a harmonized method to calculate electricity generation from small wind power systems (WPS) located onsite or near buildings. It targets small wind plants (≤ 75 kW) as typically used for domestic or building‑connected electricity production. The standard describes input/output quantities, calculation procedures and default parameter values for inclusion of WPS in building energy performance assessments (Module M11‑8‑7).
Key topics and requirements
- Scope and limits: Assessment method for WPS ≤ 75 kW; the standard does not cover sizing or inspection of turbines.
- Meteorological inputs: Use of monthly mean wind velocities at a reference height (typically 10 m); on‑site wind measurements are recommended for accuracy.
- Height correction: Conversion of wind speed from reference height to hub height using a height‑exponent (default 0.14 for average terrain).
- Wind statistics: Use of a Weibull distribution to represent wind speed frequency (default k = 2.0, scale factor WS derived from mean wind speed).
- Power calculation: Wind power per speed class computed from rotor area, air density and velocity; WPS power derived by applying a mean power coefficient that factors Betz limit and component efficiencies (defaults provided, e.g. mean power coefficient ≈ 0.2).
- Operating limits: Cut‑in and cut‑out speeds are considered; where product data are absent, defaults vin = 4 m/s and vout = 16 m/s are used.
- Monthly yield: Aggregation over wind speed classes yields monthly net electricity production Qf,prod,WPS,i (kWh).
- Annexes: Informative annexes supply default parameters, examples and calculation guidance.
Practical applications
- Integrating small wind generation into building energy performance calculations and compliance reports.
- Estimating monthly electricity yield from building‑attached or nearby micro and small turbines for energy balance, feasibility studies or energy rating inputs.
- Providing a standardized basis for national EPB implementations (allows replacement by national annexes where applicable).
Who uses this standard
- Energy assessors and consultants performing EPB calculations.
- Building services engineers and architects evaluating on‑site renewable electricity options.
- Policy makers and national standards bodies implementing EPB methodology.
- Developers, installers and product assessors needing a common calculation method for small WPS contribution.
Related standards
- EN 15316‑1 (general system calculation methods)
- EN 15603 (overall energy use and energy ratings)
- Other EN 15316 sub‑parts for different on‑site generation technologies
Keywords: EN 15316‑4‑10:2017, wind power generation systems, energy performance of buildings, small wind turbines, WPS, Weibull distribution, hub height, monthly yield, CEN.
Frequently Asked Questions
EN 15316-4-10:2017 is a standard published by the European Committee for Standardization (CEN). Its full title is "Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-10: Wind power generation systems, Module M11-8-7". This standard covers: This European Standard deals with procedures for the assessment of electricity generation within the direct building environment through wind power systems. The wind power systems described in this document are small plants as they may occur in domestic production and use of electricity in connection with buildings. This standard covers wind generation power systems ≤ 75 kW.
This European Standard deals with procedures for the assessment of electricity generation within the direct building environment through wind power systems. The wind power systems described in this document are small plants as they may occur in domestic production and use of electricity in connection with buildings. This standard covers wind generation power systems ≤ 75 kW.
EN 15316-4-10:2017 is classified under the following ICS (International Classification for Standards) categories: 27.180 - Wind turbine energy systems; 91.140.10 - Central heating systems. The ICS classification helps identify the subject area and facilitates finding related standards.
You can purchase EN 15316-4-10:2017 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Enegetische Bewertung von Gebäuden - Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 4-10: Windkraftanlagen, Modul M11-8-7Performance énergétique des bâtiments - Méthode de calcul des besoins énergétiques et des rendements des systèmes - Partie 4-10 : Systèmes de production d’électricité éolienne, Module M11-8-7Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-10: Wind power generation systems, Module M11-8-791.140.10Sistemi centralnega ogrevanjaCentral heating systems27.180Vetrne elektrarneWind turbine energy systemsICS:Ta slovenski standard je istoveten z:EN 15316-4-10:2017SIST EN 15316-4-10:2018en,fr,de01-maj-2018SIST EN 15316-4-10:2018SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15316-4-10
May
t r s y ICS
t yä s z râ
{ sä s v rä s r English Version
Energy performance of buildings æ Method for calculation of system energy requirements and system efficiencies æ Part
væ s rã Wind power generation systemsá Module M s sæ zæ y Performance énergétique des bâtiments æ Méthode de calcul des besoins énergétiques et des rendements des systèmes æ Partie
væ s r ã Systèmes de production d 5électricité éolienneá Module M s sæ zæ y
Enegetische Bewertung von Gebäuden æ Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen æ Teil
væ s rã Windkraftanlagená Modul M s sæ zæ y This European Standard was approved by CEN on
x February
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s w u s xæ væ s rã t r s y ESIST EN 15316-4-10:2018
Additional values for parametering the WPS . 12 Annex B (informative)
Additional default values for parametering the WPS . 13 Annex C (informative) Calculation example . 14 Bibliography . 16
75 kW. This European Standard does not cover sizing or inspection of WPS. Other generation systems are covered in other sub modules of part M3-8. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1. NOTE 1 In ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation. NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1. SIST EN 15316-4-10:2018
Building (as such) Technical Building Systems
Descriptions
Descriptions
Descriptions Heating Cooling Ventilation Humidification Dehumidification Domestic Hot water Lighting Automation and control Electricity production sub1
M1 sub1 M2 sub1
M3 M4 M5 M6 M7 M8 M9 M10 M11 1 General
1 General 1 General 15316–1
15316–1
2 Common terms and definitions; symbols, units and subscripts
2 Building Energy Needs 2 Needs
12831–3
3 Applications
3 (Free) Indoor Conditions without
Systems 3 Maximum Load and Power 12831–1
12831–3
4 Ways to Express Energy Performance
4 Ways to Express Energy Performance 4 Ways to Express Energy Performance 15316–1
15316–1
5 Building Functions and Building Boundaries
5 Heat Transfer by Transmission 5 Emission and control 15316–2 15316–2
6 Building Occupancy and Operating Conditions
6 Heat Transfer by Infiltration and Ventilation 6 Distribution and control 15316–3 15316–3
15316–3
7 Aggregation of Energy Services and Energy Carriers
7 Internal Heat Gains 7 S
...
기사 제목: EN 15316-4-10:2017 - 건물의 에너지 성능 - 시스템 에너지 요구 및 시스템 효율 계산 방법 - 파트 4-10: 풍력 발전 시스템, 모듈 M11-8-7 기사 내용: 이 유럽 표준은 건물 내 풍력 발전 시스템을 통해 전기 생산을 평가하기 위한 절차에 대해 다루고 있다. 이 문서에서 설명되는 풍력 발전 시스템은 건물과 연결되어 가정용 전기 생산과 사용과 관련된 소규모 발전소에 해당한다. 이 표준은 75 kW 이하의 풍력 발전 시스템을 다룬다.
The article discusses the European Standard EN 15316-4-10:2017, which focuses on the evaluation of electricity generation from wind power systems in buildings. The standard specifically addresses small wind power plants that are commonly found in residential settings for the production and usage of electricity. It applies to wind generation power systems with a capacity of 75 kW or less.
記事のタイトル：EN 15316-4-10:2017 - 建築物のエネルギー性能 - システムのエネルギー要求とシステムの効率の計算方法 - 第4-10部：風力発電システム、モジュールM11-8-7 記事の内容：この欧州規格は、風力発電システムを介して建物内での電力生成の評価手順に関するものです。この文書で説明される風力発電システムは、建物と関連して家庭用の電力生産と使用が行われる小規模な発電所を指します。この規格は、75 kW以下の風力発電システムをカバーしています。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...