EN ISO 15609-5:2004
(Main)Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2004)
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2004)
ISO 15609-5:2004 specifies requirements for the content of welding procedure specifications for resistance spot, seam, butt and projection welding processes. The acceptability of applying the principles of this International Standard to other resistance and related welding processes should be established before any qualification is undertaken.
Variables listed in ISO 15609-5:2004 are those influencing either weld dimensions (quality), weld nugget dimension, weld pattern positioning, mechanical properties or geometry of the welded joint.
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißanweisung - Teil 5: Widerstandsschweißen (ISO 15609-5:2004)
Diese Norm legt fest, wie die Schweißanweisungen die Anforderungen an den Inhalt von Widerstandspunkt-, Rollennaht-, Preßstumpf- und Buckel-Schweißprozessen erfüllen. Die Grundsätze dieser Norm können auch für andere Widerstands- sowie verwandte Schweißprozesse angewendet werden, wenn sie Gegenstand von Vereinbarungen zwischen den Vertragspartnern sind. Diese Norm ist Teil einer Normenreihe. Anhang D gibt Einzelheiten dieser Normenreihe wieder.
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Descriptif d'un mode opératoire de soudage - Partie 5: Soudage par résistance (ISO 15609-5:2004)
L'ISO 15609-5:2004 spécifie les exigences relatives au contenu des descriptifs de modes opératoires de soudage pour les procédés de soudage par résistance par points, à la molette, en bout et par bossages. Il convient de définir la possibilité d'appliquer les principes de l'ISO 15609-5:2004 à d'autres procédés de soudage par résistance ou assimilés avant d'entreprendre toute qualification.
Les variables énumérées dans l'ISO 15609-5:2004 sont celles qui ont une influence soit sur les dimensions de la soudure (qualité), les dimensions du noyau de la soudure, la configuration des soudures, les caractéristiques mécaniques, soit sur la géométrie de l'assemblage soudé.
Popis in kvalifikacija varilnih postopkov za kovinske materiale – Specifikacija varilnega postopka – 5. del: (Elektro)uporovno varjenje (ISO 15609-5:2004)
General Information
- Status
- Withdrawn
- Publication Date
- 31-Jul-2004
- Withdrawal Date
- 30-Sep-2011
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/SC 4 - Quality management in the field of welding
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Oct-2011
- Completion Date
- 01-Oct-2011
Relations
- Effective Date
- 25-Feb-2009
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN ISO 15609-5:2004 is a standard published by the European Committee for Standardization (CEN). Its full title is "Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2004)". This standard covers: ISO 15609-5:2004 specifies requirements for the content of welding procedure specifications for resistance spot, seam, butt and projection welding processes. The acceptability of applying the principles of this International Standard to other resistance and related welding processes should be established before any qualification is undertaken. Variables listed in ISO 15609-5:2004 are those influencing either weld dimensions (quality), weld nugget dimension, weld pattern positioning, mechanical properties or geometry of the welded joint.
ISO 15609-5:2004 specifies requirements for the content of welding procedure specifications for resistance spot, seam, butt and projection welding processes. The acceptability of applying the principles of this International Standard to other resistance and related welding processes should be established before any qualification is undertaken. Variables listed in ISO 15609-5:2004 are those influencing either weld dimensions (quality), weld nugget dimension, weld pattern positioning, mechanical properties or geometry of the welded joint.
EN ISO 15609-5:2004 is classified under the following ICS (International Classification for Standards) categories: 25.160.10 - Welding processes. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 15609-5:2004 has the following relationships with other standards: It is inter standard links to EN ISO 15609-5:2011, EN ISO 13710:2004, EN 13814:2004, EN ISO 14327:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 15609-5:2004 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 15609-5:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2004
Popis in kvalifikacija varilnih postopkov za kovinske materiale – Specifikacija
varilnega postopka – 5. del: (Elektro)uporovno varjenje (ISO 15609-5:2004)
Specification and qualification of welding procedures for metallic materials - Welding
procedure specification - Part 5: Resistance welding (ISO 15609-5:2004)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißanweisung - Teil 5: Widerstandsschweißen (ISO 15609-5:2004)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Descriptif d'un mode opératoire de soudage - Partie 5: Soudage par
résistance (ISO 15609-5:2004)
Ta slovenski standard je istoveten z: EN ISO 15609-5:2004
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...