EN 13317:2002
(Main)Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
This European Standard is applicable to manhole cover assembly and specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of equipment to this standard. The equipment specified in this standard is suitable for use with liquid petroleum products and other dangerous substances of class3 (flammable liquids) of ADR- European Agreement concerning the International Carriage of Dangerous Goods by Road- which have a vapour pressure at 50°C not greater than 110kPa.
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Baugruppe Deckel für Einsteigeöffnungen
Diese Europäische Norm gilt für die Baugruppe Mannlochdeckel und legt Leistungsanforderungen, entscheidende Maße sowie Prüfungen fest, die erforderlich sind um nachzuweisen, daß die Ausrüstung der vorliegenden Norm entspricht. Die in dieser Norm beschriebene Ausrüstung ist zum Umfüllen flüssiger Erdölerzeugnisse und anderer gefährlicher Güter der Klasse 3 (feuergefährliche Güter) geeignet, deren Dampfdruck bei 50 °C maximal 110 kPa beträgt und für deren Transport auf der Straße die ADR (European Agreement concerning the International Carriage of Dangerous Goods by Road) gilt.
Citernes destinées au transport de matières dangereuses - Equipement de service pour citernes - Couvercles de trou d'homme
La présente Norme européenne s'applique aux couvercles de trou d'homme et spécifie les exigences de performance, les dimensions et les essais nécessaires pour vérifier la conformité du dispositif à la présente norme.
L'équipement spécifié par la présente norme convient à une utilisation avec des produits pétroliers liquides et autres matières dangereuses de la classe 3 de l'ADR - Accord européen relatif au transport international des marchandises dangereuses par route (liquides inflammables) dont la tension de vapeur ne dépasse pas 110 kPa à 50 °C (y compris l'essence) et qui n'appartiennent à aucune sous-classification des produits toxiques ou corrosifs.
Posode za prevoz nevarnih snovi - Obratovalna oprema za posode - Sklop pokrova vstopne odprtine
General Information
- Status
- Withdrawn
- Publication Date
- 22-Oct-2002
- Withdrawal Date
- 07-Nov-2006
- Technical Committee
- CEN/TC 296 - Tanks for transport of dangerous goods
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 08-Nov-2006
- Completion Date
- 08-Nov-2006
Relations
- Effective Date
- 19-Jan-2023
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 13317:2002 is a standard published by the European Committee for Standardization (CEN). Its full title is "Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly". This standard covers: This European Standard is applicable to manhole cover assembly and specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of equipment to this standard. The equipment specified in this standard is suitable for use with liquid petroleum products and other dangerous substances of class3 (flammable liquids) of ADR- European Agreement concerning the International Carriage of Dangerous Goods by Road- which have a vapour pressure at 50°C not greater than 110kPa.
This European Standard is applicable to manhole cover assembly and specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of equipment to this standard. The equipment specified in this standard is suitable for use with liquid petroleum products and other dangerous substances of class3 (flammable liquids) of ADR- European Agreement concerning the International Carriage of Dangerous Goods by Road- which have a vapour pressure at 50°C not greater than 110kPa.
EN 13317:2002 is classified under the following ICS (International Classification for Standards) categories: 13.300 - Protection against dangerous goods; 23.020.10 - Stationary containers and tanks; 23.020.20 - Vessels and containers mounted on vehicles. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13317:2002 has the following relationships with other standards: It is inter standard links to EN 13317:2002+A1:2006, EN ISO 28802:2012, EN ISO 11855-1:2015, EN ISO 11079:2007, EN ISO 14644-3:2005, EN ISO 29462:2013, EN ISO 7933:2004, EN 4618:2009; is excused to EN 13314:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13317:2002 is associated with the following European legislation: EU Directives/Regulations: 94/55/EC, 96/49/EC, 96/86/EC, 96/87/EC, TRRTP121. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13317:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Posode za prevoz nevarnih snovi - Obratovalna oprema za posode - Sklop pokrova vstopne odprtineTanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Baugruppe Deckel für EinsteigeöffnungenCiternes destinées au transport de matieres dangereuses - Equipement de service pour citernes - Couvercles de trou d'hommeTanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13317:2002SIST EN 13317:2003en01-december-2003SIST EN 13317:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13317October 2002ICS 13.300; 23.020.20English versionTanks for transport of dangerous goods - Service equipment fortanks - Manhole cover assemblyCiternes destinées au transport de matières dangereuses -Equipement de service pour citernes - Couvercles de troud'hommeTanks für die Beförderung gefährlicher Güter -Bedienungsausrüstung von Tanks - Baugruppe Deckel fürEinsteigeöffnungenThis European Standard was approved by CEN on 17 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13317:2002 ESIST EN 13317:2003
Drop test apparatus.10Annex B (normative)
Manhole cover assembly.11SIST EN 13317:2003
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...