EN 45545-5:2013+A1:2015
(Main)Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
This Part of EN 45545 specifies the fire safety requirements for electrical equipment on railway vehicles, including that of trolley buses, track guided buses and magnetic levitation vehicles.
The measures and requirements, specified in this European Standard meet the objective of protecting passengers and staff in railway vehicles in the event of a fire on board by:
- lowering the risk of starting a fire both during operation and as a result of technical defect and/or malfunction of the electrical equipment,
- ensuring that electrical emergency equipment continues to be functional until evacuation is complete
(see EN 45545-6).
Bahnanwendungen - Brandschutz in Schienenfahrzeugen - Teil 5: Brandschutzanforderungen an die elektrische Ausrüstung einschließlich der von Oberleitungsbussen, spurgeführten Bussen und Magnetschwebefahrzeugen
Dieser Teil von EN 45545 legt die Sicherheitsanforderungen an die elektrische Ausrüstung von Schienen-fahrzeugen einschließlich der von Oberleitungsbussen, spurgeführten Bussen und Magnetschwebefahr-zeugen fest.
Die in dieser Europäischen Norm festgelegten Maßnahmen und Anforderungen haben zum Ziel, Fahrgäste und Personal in Schienenfahrzeugen im Brandfall an Bord zu schützen, indem:
– die Gefahr des Ausbruches von Feuer während des Betriebes und als Ergebnis eines technischen Fehlers und/oder des Versagens der elektrischen Ausrüstung auf ein Mindestmaß reduziert wird;
– sichergestellt wird, dass die elektrischen Notfallausrüstungen solange zur Verfügung stehen, bis die Eva¬kuierung abgeschlossen ist (siehe FprEN 45545 6).
Applications ferroviaires - Protection contre les incendies dans les véhicules ferroviaires - Partie 5: Exigences de sécurité incendie pour l'équipement électrique, y compris celui des trolleybus, des autobus guidés et des véhicules à sustentation magnét
La présente partie de l’EN 45545 spécifie les exigences de sécurité incendie pour l’équipement électrique des véhicules ferroviaires y compris celui des trolleybus, des autobus guidés et des véhicules à sustentation magnétique.
Les mesures et les exigences spécifiées dans la présente Norme européenne ont pour objectif de protéger à la fois les voyageurs et le personnel dans les véhicules ferroviaires en cas d’incendie à bord:
- en réduisant les risques d’ignition à la fois lors de l’exploitation et comme résultant d’un défaut technique et/ou fonctionnel de l’équipement électrique;
- en assurant le fonctionnement des équipements électriques de sécurité jusqu’à l’évacuation complète des personnes (voir FprEN 45545-6).
Železniške naprave - Požarna zaščita na železniških vozilih - 5. del: Zahteve požarne varnosti za električno opremo, vključno z opremo trolejbusov, tirno vodenih avtobusov in lebdečih vozil na magnetni blazini
Ta del standarda EN 45545 določa zahteve požarne varnosti za električno opremo na železniških vozilih, vključno z opremo trolejbusov, tirno vodenih avtobusov in lebdečih vozil na magnetni blazini.
Ukrepi in zahteve iz tega evropskega standarda ščitijo potnike in vlakovno osebje na železniških vozilih v primeru požara na vozilu:
– zmanjšujejo nevarnost požara med obratovanjem in požara, ki nastane zaradi tehnične napake in/ali okvare električne opreme,
– zagotavljajo, da je električna oprema za uporabo v sili vedno funkcionalna vse do konca evakuacije
(glej standard EN 45545-6).
General Information
Relations
Overview
EN 45545-5:2013+A1:2015 - part of the CEN series “Railway applications - Fire protection on railway vehicles” - specifies fire safety requirements for electrical equipment on railway vehicles, including trolley buses, track-guided buses and magnetic levitation vehicles. Its purpose is to reduce ignition risk from electrical systems and to ensure that electrical emergency equipment remains functional until evacuation is complete (see EN 45545-6). The standard applies to design, installation and maintainability of on-board electrical equipment to protect passengers and staff in the event of fire.
Key Topics
- Scope & Objectives: Lowering fire-start risk from electrical equipment and ensuring emergency electrical systems operate through evacuation.
- Design requirements:
- Overload protection: selection and setting of protection (consider short-circuit currents, source and line impedances, breaking capability).
- Cabling: requirements for metallic ducts/conduits, earth bonding, mechanical protection, and arc extinguishing devices where protection response is slower than 250 ms.
- Electrical arc protection: types of arc containment - arc splash barriers, Type A (short-duration arcs) and Type B (fault arcs) - with associated material and fire-resistance classifications referenced to EN 45545-2 and EN 45545-3.
- Enclosures & partitions: protection from external influences, contact with live parts, venting of explosive gases, and interaction with fire barriers required by EN 45545-3.
- Batteries: venting to exterior, insulation and protection of battery circuits, and rules when poles are not body-bonded (see EN 50547).
- Other components: switchgear, emergency electrical equipment, bonding, resistors/heaters, forced-ventilated equipment, flammable liquids and cable ducts.
- Maintainability & Modifications: maintenance requirements and controls for electrical equipment changes.
- Conformity & Compliance: evaluation of conformity and relationship to EU Directive 2008/57/EC (informative Annex ZA).
Applications / Who Uses It
- Rolling stock designers and OEMs creating traction systems, auxiliary power and control equipment.
- System integrators and electrical engineers responsible for cabling, battery enclosures and switchgear selection.
- Safety and certification engineers preparing conformity assessments and documentation for regulatory compliance.
- Maintenance teams and asset managers defining inspection, modification and repair procedures for on-board electrical equipment.
- Procurement and fleet owners specifying fire-safe electrical equipment and installation practices.
Related Standards
- EN 45545-1, -2, -3, -4, -6 (fire protection series)
- EN 50124-1 (insulation coordination), EN 50125-1 (environmental conditions), EN 50153 (electrical hazards)
- EN 50343 (cabling installation), EN 50547 (batteries), EN 61140 (electrical protection)
Keywords: EN 45545-5:2013+A1:2015, fire protection on railway vehicles, electrical equipment, arc protection, cabling, battery venting, railway safety, conformity.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Brandschutz in Schienenfahrzeugen - Teil 5: Brandschutzanforderungen an die elektrische Ausrüstung einschließlich der von Oberleitungsbussen, spurgeführten Bussen und MagnetschwebefahrzeugenApplications ferroviaires - Protection contre les incendies dans les véhicules ferroviaires - Partie 5: Exigences de sécurité incendie pour l'équipement électrique, y compris celui des trolleybus, des autobus guidés et des véhicules à sustentation
magnétRailway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles45.060.01Železniška vozila na splošnoRailway rolling stock in general13.220.20Fire protectionICS:Ta slovenski standard je istoveten z:EN 45545-5:2013+A1:2015SIST EN 45545-5:2013+A1:2015en,fr,de01-december-2015SIST EN 45545-5:2013+A1:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 45545-5:2013+A1
October
t r s w ICS
s uä t t rä t râ
v wä r x rä r s Supersedes EN
v w w v wæ wã t r s uEnglish Version
Railway applications æ Fire protection on railway vehicles æPart
wã Fire safety requirements for electrical equipment including that of trolley busesá track guided buses and magnetic levitation vehicles Applications ferroviaires æ Protection contre les incendies dans les vßhicules ferroviaires æ Partie
wã Exigences de sßcuritß incendie pour l 5ßquipement ßlectriqueá y compris celui des trolleybusá des autobus guidßs et des vßhicules à sustentation
magnßtique
Bahnanwendungen æ Brandschutz in Schienenfahrzeugen æ Teil
wã Brandschutzanforderungen an die elektrische Ausrüstung einschließlich der von Oberleitungsbussená spurgeführten Bussen und MagnetschwebefahrzeugenThis European Standard was approved by CEN on
s r December
t r s t and includes Amendment
s approved by CEN on
s v August
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v w w v wæ wã t r s u ªA sã t r s w ESIST EN 45545-5:2013+A1:2015
Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC . 12 Bibliography . 14
(see EN 45545-6). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 45545-1:2013, Railway applications — Fire protection on railway vehicles — Part 1: General !EN 45545-2:2013+A1:2015", Railway applications — Fire protection on railway vehicles — Part 2: Requirements for fire behavior of materials and components EN 45545-3:2013, Railway applications — Fire protection on railway vehicles — Part 3: Fire resistance requirements for fire barriers EN 45545-4, Railway applications — Fire protection on railway vehicles — Part 4: Fire safety requirements for rolling stock design EN 45545-6, Railway applications — Fire protection on railway vehicles — Part 6: Fire control and management systems EN 50124-1, Railway applications - Insulation coordination — Part 1: Basic requirements — Clearances and creepage distances for all electrical and electronic equipment EN 50125-1, Railway applications — Environmental conditions for equipment — Part 1: Equipment on board rolling stock EN 50153, Railway applications — Rolling stock — Protective provisions relating to electrical hazards EN 50343, Railway applications — Rolling stock — Rules for installation of cabling !EN 50547, Railway applications — Batteries for auxiliary power supply systems" EN 61140, Protection against electric shock — Common aspects for installation and equipment(IEC 61140) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 45545-1:2013 apply. SIST EN 45545-5:2013+A1:2015
...
Frequently Asked Questions
EN 45545-5:2013+A1:2015 is a standard published by the European Committee for Standardization (CEN). Its full title is "Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles". This standard covers: This Part of EN 45545 specifies the fire safety requirements for electrical equipment on railway vehicles, including that of trolley buses, track guided buses and magnetic levitation vehicles. The measures and requirements, specified in this European Standard meet the objective of protecting passengers and staff in railway vehicles in the event of a fire on board by: - lowering the risk of starting a fire both during operation and as a result of technical defect and/or malfunction of the electrical equipment, - ensuring that electrical emergency equipment continues to be functional until evacuation is complete (see EN 45545-6).
This Part of EN 45545 specifies the fire safety requirements for electrical equipment on railway vehicles, including that of trolley buses, track guided buses and magnetic levitation vehicles. The measures and requirements, specified in this European Standard meet the objective of protecting passengers and staff in railway vehicles in the event of a fire on board by: - lowering the risk of starting a fire both during operation and as a result of technical defect and/or malfunction of the electrical equipment, - ensuring that electrical emergency equipment continues to be functional until evacuation is complete (see EN 45545-6).
EN 45545-5:2013+A1:2015 is classified under the following ICS (International Classification for Standards) categories: 13.220.20 - Fire protection; 45.060.01 - Railway rolling stock in general; 45.140 - Metro, tram and light rail equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 45545-5:2013+A1:2015 has the following relationships with other standards: It is inter standard links to EN 45545-5:2013/FprA1. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 45545-5:2013+A1:2015 is associated with the following European legislation: EU Directives/Regulations: 2008/57/EC; Standardization Mandates: M/483. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 45545-5:2013+A1:2015 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
記事のタイトル：EN 45545-5:2013+A1:2015 - 鉄道車両における火災保護 - 第5部：トロリーバス、トラックガイドバス、および磁気浮上車両を含む電気設備の火災安全要件 記事の内容：このEN 45545-5は、トロリーバス、トラックガイドバス、および磁気浮上車両などの鉄道車両の電気設備に対する火災安全要件を規定しています。 この欧州標準で指定されている措置と要件は、火災発生時に乗客やスタッフを保護することを目的としています。具体的には、以下のことを行います： - 運行中および電気設備の技術的欠陥や故障による火災のリスクを低減すること - 非常用電気設備が完全な避難が完了するまで機能し続けることを保証すること（EN 45545-6を参照）
The article is about EN 45545-5:2013+A1:2015, a European standard that specifies fire safety requirements for electrical equipment on railway vehicles such as trolley buses, track guided buses, and magnetic levitation vehicles. The standard aims to protect passengers and staff in the event of a fire by minimizing the risk of fires starting due to technical defects or malfunctions of the electrical equipment. It also ensures that electrical emergency equipment remains functional until evacuation is complete.
기사 제목: EN 45545-5:2013+A1:2015 - 철도 차량에 대한 화재 보호 - 파트 5: 돌리 버스, 트랙 가이드 버스 및 자기 부상 차량을 포함한 전기 장비에 대한 화재 안전 요구 사항 기사 내용: 이 부분은 돌리 버스, 트랙 가이드 버스 및 자기 부상 차량을 비롯한 철도 차량의 전기 장비에 대한 화재 안전 요구 사항을 명시합니다. 이 유럽 표준에서 지정된 조치와 요구 사항은 화재 발생 시 탑승자와 스태프를 보호하는 목적을 달성하기 위해 다음과 같은 것들을 수행합니다: - 운전 중에 화재 발생 위험을 줄이고, 전기 장비의 기술적 결함이나 고장으로 인한 화재 위험을 줄이는 것 - 철도 차량 내에서 완화가 완료 될 때까지 전기 비상 장비가 기능을 계속 유지하도록 보장하는 것(EN 45545-6 참조)
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...