EN ISO 15148:2002/A1:2016

SLOVENSKI STANDARD
01-april-2016
Higrotermalne lastnosti gradbenih materialov in proizvodov - Ugotavljanje
koeficienta navzemanja z vodo z metodo delne potopitve Dopolnilo A1 (ISO
15148:2002/Amd 1:2016)
Hygrothermal performance of building materials and products - Determination of water
absorption coefficient by partial immersion - Amendment 1 (ISO 15148:2002/Amd
1:2016)
Wärme- und feuchtetechnisches Verhalten von Baustoffen und Bauprodukten -
Bestimmung des Wasseraufnahmekoeffizienten bei teilweisem Eintauchen - Änderung
A1 (ISO 15148:2002/Amd 1:2016)
Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination
du coefficient d'absorption d'eau par immersion partielle - Amendement 1 (ISO
15148:2002/Amd 1:2016)
Ta slovenski standard je istoveten z: EN ISO 15148:2002/A1:2016
ICS:
91.100.01 Gradbeni materiali na Construction materials in
splošno general
91.120.30 =DãþLWDSUHGYODJR Waterproofing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 15148:2002/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2016
EUROPÄISCHE NORM
ICS 91.100.01; 91.100.60
English Version
Hygrothermal performance of building materials and
products - Determination of water absorption coefficient
by partial immersion - Amendment 1 (ISO
15148:2002/Amd 1:2016)
Performance hygrothermique des matériaux et Wärme- und feuchtetechnisches Verhalten von
produits pour le bâtiment - Détermination du Baustoffen und Bauprodukten - Bestimmung des
coefficient d'absorption d'eau par immersion partielle - Wasseraufnahmekoeffizienten bei teilweisem
Amendement 1 (ISO 15148:2002/Amd 1:2016) Eintauchen - Änderung 1 (ISO 15148:2002/Amd
1:2016)
This amendment A1 modifies the European Standard EN ISO 15148:2002; it was approved by CEN on 26 October 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15148:2002/A1:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
European foreword
This document (EN ISO 15148:2002/A1:2016) has been prepared by Technical Committee
ISO/TC 163 “Thermal performance and energy use in the built environment” in collaboration with
Technical Committee CEN/TC 89 “Thermal performance of buildings and building components” the
secretariat of which is held by SIS.
This Amendment to the European Standard EN ISO 15148:2002 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by August 2016, and
conflicting national standards shall be withdrawn at the latest by August 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are
...