iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN ISO/TS 15011-6:2012/AC:2012

(Corrigendum)

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012)

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012)

This part of ISO 15011 provides guidance on determination of emission rates of fume and gases generated by spot welding of uncoated and coated steel sheets, expressed as the quantity of pollutants per spot weld. It describes the test principle and considers methods for sampling and analysis. This part of ISO 15011 can be used for determining the influence of the type of material, the coating system, and the material thickness on the possible generation of fume and gases when using a fixed combination of electrodes, welding equipment, and testing conditions. The data generated can be used by product manufacturers to provide information for inclusion in safety data sheets and by occupational hygienists to evaluate the significant substances emitted by spot welding in the performance of risk assessments and/or workplace exposure measurements.

Arbeits- und Gesundheitsschutz beim Schweißen und bei verwandten Verfahren - Laborverfahren zum Sammeln von Rauch und Gasen - Teil 6: Verfahren zur quantitativen Bestimmung von Rauchen und Gasen beim Widerstandspunktschweißen (ISO/TS 15011-6:2012/Cor 1:2012)

Hygiène et sécurité en soudage et techniques connexes - Méthode de laboratoire d'échantillonnage des fumées et des gaz - Partie 6: Procédure pour la détermination quantitative des fumées et des gaz générés par le soudage par résistance par points - Rectificatif technique 1 (ISO/TS 15011-6:2012/Cor 1:2012)

Zdravje in varnost pri varjenju in sorodnih postopkih - Laboratorijska metoda za vzorčenje dima in plinov - 6. del: Postopek količinskega ugotavljanja dima in plinov pri uporovnem točkastem varjenju - Popravek AC (ISO/TS 15011-6:2012/Cor 1:2012)

Ta del standarda ISO 15011 vsebuje navodila za ugotavljanje stopenj emisij dima in plinov, ki nastajajo pri točkastem varjenju neprevlečene in prevlečene jeklene pločevine, izraženih v količini onesnaževal na točkovni zvar. Opisuje preskusno načelo ter obravnava metode za vzorčenje in analizo. Ta del standarda ISO 15011 je mogoče uporabiti za ugotavljanje vpliva vrste materiala, premaznega sistema in debeline materiala na morebitno nastajanje dima in plinov ob uporabi določene kombinacije elektrod, opreme za varjenje in preskusnih pogojev. Dobljene podatke lahko uporabijo proizvajalci izdelka kot informacije za vključitev v varnostne liste, higieniki na delovnem mestu pa za vrednotenje pomembnih snovi, ki nastajajo pri točkovnem varjenju, pri izvajanju ocen tveganja in/ali meritvah izpostavljenosti na delovnem mestu.

General Information

Status
Published
Publication Date
14-Sep-2012
ICS
13.100 - Occupational safety. Industrial hygiene
25.160.10 - Welding processes
Technical Committee
CEN/TC 121 - Welding
Drafting Committee
CEN/TC 121/WG 9 - Health and safety in welding and allied processes
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Sep-2012
Completion Date
15-Sep-2012
Ref Project
SIST-TS CEN ISO/TS 15011-6:2012/AC:2013 - Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012)

Relations

Corrects
CEN ISO/TS 15011-6:2012 - Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS 15011-6:2012)
Effective Date
19-Sep-2012

Buy Standard

TS CEN ISO/TS 15011-6:2012/AC:2013TS CEN ISO/TS 15011-6:2012/AC:2013
PreviousNext
Corrigendum
TS CEN ISO/TS 15011-6:2012/AC:2013
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.&RUArbeits- und Gesundheitsschutz beim Schweißen und bei verwandten Verfahren - Laborverfahren zum Sammeln von Rauch und Gasen - Teil 6: Verfahren zur quantitativen Bestimmung von Rauchen und Gasen beim Widerstandspunktschweißen (ISO/TS 15011-6:2012/Cor 1:2012)Hygiène et sécurité en soudage et techniques connexes - Méthode de laboratoire d'échantillonnage des fumées et des gaz - Partie 6: Procédure pour la détermination quantitative des fumées et des gaz générés par le soudage par résistance par points - Rectificatif technique 1 (ISO/TS 15011-6:2012/Cor 1:2012)Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012)25.160.10Varilni postopki in varjenjeWelding processes13.100Varnost pri delu. Industrijska higienaOccupational safety. Industrial hygieneICS:Ta slovenski standard je istoveten z:CEN ISO/TS 15011-6:2012/AC:2012SIST-TS CEN ISO/TS 15011-6:2012/AC:2013en,fr,de01-december-2013SIST-TS CEN ISO/TS 15011-6:2012/AC:2013SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
CEN ISO/TS 15011-6:2012/AC
September 2012
Septembre 2012
September 2012 ICS 13.100; 25.160.10 English version Version Française Deutsche Fassung
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012)
Hygiène et sécurité en soudage et techniques connexes - Méthode de laboratoire d'échantillonnage des fumées et des gaz - Partie 6: Procédure pour la détermination quantitative des fumées et des gaz générés par le soudage par résistance par points - Rectificatif technique 1 (ISO/TS 15011-6:2012/Cor 1:2012)
Arbeits- und Gesundheitsschutz beim Schweißen und bei verwandten Verfahren -Laborverfahren zum Sammeln von Rauch und Gasen - Teil 6: Verfahren zur quantitativen Bestimmung von Rauchen und Gasen beim Widerstandspunktschweißen (ISO/TS 15011-6:2012/Cor 1:2012) This corrigendum becomes effective on 15 September 2012 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 15 septembre 2012 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 15. September 2012 zur Einarbeitung in die drei offiziellen Sprachfassungender EN in Kraft.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier aux membres nationaux du CEN. Alle Rechte der Verwer
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 25980:2023(Main)
Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes (ISO 25980:2023, Corrected version 2023-08)
SIST EN ISO 25980:2023

This document specifies safety requirements for transparent welding curtains, strips and screens to be used in workplaces where arc welding is taking place. They are intended to provide protection against harmful levels of optical radiation and spatter for workers who are in the vicinity of arc welding processes but not involved in the welding itself. They are intended to reduce the discomfort glare from the arc but also allow sufficient luminous transmittance to permit a view into the workspace behind.
The transparent welding curtains can also be used in other applications as long as the UV- and blue-light emissions are less than in arc welding and the transmitted infrared irradiance is below applicable exposure limits. They are designed to be used at a distance from the arc of at least 1 m.
Welding curtains, strips and screens specified in this document are not intended to replace welding filters. For intentional viewing of welding arcs, other means of protection are used, see ISO 16321-1 and ISO 16321-2.
This document is not applicable to protection against laser radiation, for which ISO 19818-1 applies.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 25901-2:2023(Main)
Welding and allied processes - Vocabulary - Part 2: Health and safety (ISO 25901-2:2022)
SIST EN ISO 25901-2:2023

This document contains terms and definitions applicable to health and safety in welding and allied processes. It is intended to be referenced in other documents dealing with this subject.
In the main body of this document, terms are arranged in systematic order. Indexes are included at the end of this document in which all terms are listed alphabetically in English, French and German, respectively, with reference to the appropriate term numbers and translations of the terms in the other two languages.
NOTE: In addition to text written in the official ISO languages (English and French), this document gives text in German. This text is published under the responsibility of the member body for Germany (DIN) and is given for information only. Only the text given in the official languages can be considered as ISO text.

  • Standard
    86 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15011-4:2018(Main)
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2017)
SIST EN ISO 15011-4:2018

ISO 15011-4:2017 covers health and safety in welding and allied processes. It specifies requirements for determination of the emission rate and chemical composition of welding fume in order to prepare fume data sheets.
ISO 15011-4:2017 applies to all filler materials used for joining or surfacing by arc welding using a manual, partly mechanized or fully automatic process, depositing unalloyed steel, alloyed steel and non‑ferrous alloys. Manual metal arc welding, gas‑shielded metal arc welding with solid wires, metal‑cored and flux‑cored wires and arc welding with self‑shielded flux‑cored wires are included within the scope of this document.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 15011-6:2012(Main)
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS 15011-6:2012)
SIST-TS CEN ISO/TS 15011-6:2012

ISO/TS 15011-6:2012 provides guidance on determination of emission rates of fume and gases generated by spot welding of uncoated and coated steel sheets, expressed as the quantity of pollutants per spot weld. It describes the test principle and considers methods for sampling and analysis.
ISO/TS 15011-6:2012 can be used for determining the influence of the type of material, the coating system, and the material thickness on the possible generation of fume and gases when using a fixed combination of electrodes, welding equipment, and testing conditions.
The data generated can be used by product manufacturers to provide information for inclusion in safety data sheets and by occupational hygienists to evaluate the significant substances emitted by spot welding in the performance of risk assessments and/or workplace exposure measurements.

  • Technical specification
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15011-5:2011(Main)
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chromatography-mass spectrometry (ISO 15011-5:2011)
SIST EN ISO 15011-5:2011

ISO 15011-5:2011 specifies procedures for obtaining information about thermal degradation products generated when welding, cutting through, preheating and straightening metal treated with coatings composed wholly or partly of organic substances, e.g. shop primers, paints, oils, waxes and inter‑weld materials such as adhesives and sealants. It is aimed primarily at test laboratories performing such procedures. The data generated can be used by coating manufacturers to provide information for inclusion in safety data sheets and by occupational hygienists to identify thermal degradation products of significance in the performance of risk assessments and/or workplace exposure measurements. The data cannot be used to estimate workplace exposure directly.
ISO 15011-5:2011 is applicable to all coatings composed partly or wholly of organic materials that can be heated, during welding and cutting, preheating and straightening to temperatures at which thermal degradation products are generated and where it is not apparent what those degradation products are.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15011-3:2009(Main)
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3:2009)
SIST EN ISO 15011-3:2010

ISO 15011-3:2009 defines a laboratory method for measuring the emission rate of ozone during arc welding, using a hood technique. The method is directed primarily at measuring ozone emission rate when using gas-shielded arc welding processes, but it can also be employed with other processes, e.g. self-shielded flux-cored arc welding, provided that welding can be performed automatically under the hood.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15011-2:2009(Main)
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging (ISO 15011-2:2009)
SIST EN ISO 15011-2:2010

ISO 15011-2:2009 defines laboratory methods for measuring the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) generated during arc welding, cutting and gouging, using a hood technique. The methodology is suitable for use with all open arc welding processes, cutting and gouging, but different designs of hood are used depending on the process and whether or not it can be conducted automatically.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15011-1:2009(Main)
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO 15011-1:2009)
SIST EN ISO 15011-1:2010

ISO 15011-1:2009 defines a laboratory method for measuring the emission rate of fume from arc welding. It also defines a method of collecting the fume for subsequent analysis and refers to suitable analytical techniques. The methods described are suitable for use with all open arc welding processes except tungsten inert gas (TIG) welding, which produces little fume.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 15011-1(Main)
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO/DIS 15011-1:2015)
oSIST prEN ISO 15011-1:2015

2017-03-14: WI cancelled following cancellation of equivalent ISO WI (see ISO notification received on 2017-03-13).

  • Draft
    25 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 25980:2023(Main)
Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes (ISO 25980:2023, Corrected version 2023-08)
SIST EN ISO 25980:2023

This document specifies safety requirements for transparent welding curtains, strips and screens to be used in workplaces where arc welding is taking place. They are intended to provide protection against harmful levels of optical radiation and spatter for workers who are in the vicinity of arc welding processes but not involved in the welding itself. They are intended to reduce the discomfort glare from the arc but also allow sufficient luminous transmittance to permit a view into the workspace behind.
The transparent welding curtains can also be used in other applications as long as the UV- and blue-light emissions are less than in arc welding and the transmitted infrared irradiance is below applicable exposure limits. They are designed to be used at a distance from the arc of at least 1 m.
Welding curtains, strips and screens specified in this document are not intended to replace welding filters. For intentional viewing of welding arcs, other means of protection are used, see ISO 16321-1 and ISO 16321-2.
This document is not applicable to protection against laser radiation, for which ISO 19818-1 applies.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day