EN 1034-8:2012
(Main)Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants
This European Standard applies to low consistency refining plants, i.e. plants working with suspensions of fibres of virgin pulp, mechanical wood pulp or deinking pulp in water with a consistency up to approximately 6 %, used in the paper making process and applies together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to refining plants, when used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This standard does not apply to beaters.
This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.
Sicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 8: Mahlanlagen
Diese Europäische Norm gilt für Mahlanlagen mit niedriger Stoffdichte, d. h. Anlagen für Suspensionen aus natürlichem Zellstoff, mechanischem Holzstoff oder Deinking-Stoff in Wasser mit einer Stoffdichte von bis zu etwa 6 %, die in der Papierherstellung verwendet werden, und gilt zusammen mit EN 1034-1:2000+A1:2010. Sie behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse für Mahlanlagen, die bestimmungsgemäß und unter den vom Hersteller vorherzusehenden Bedingungen verwendet werden (siehe Abschnitt 4).
Diese Europäische Norm gilt nicht für Holländer (en: beaters).
Diese Europäische Norm gilt nicht für Maschinen, die vor dem Datum der Veröffentlichung als europäische Norm hergestellt wurden.
Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 8: Ateliers de raffinage
La présente Norme européenne s'applique aux ateliers de raffinage à basse concentration, c’est-à-dire les ateliers de traitement de suspensions aqueuses contenant au plus approximativement 6 % de fraction massique de fibres de pâte vierge, de pâte de bois mécanique ou de pâte désencrée, utilisés dans le processus de fabrication du papier. Cette norme doit être appliquée conjointement avec l'EN 1034 1:2000+A1:2010. Elle traite de l’ensemble des phénomènes dangereux et situations et événements dangereux qui concernent les ateliers de raffinage, quand ceux-ci sont utilisés normalement et dans les conditions prévues par le fabricant (voir Article 4).
Cette norme n'est pas applicable aux piles raffineuses.
Cette norme n'est pas applicable aux machines qui ont été fabriquées avant la publication de la présente norme par le CEN.
Varnost strojev - Varnostne zahteve za načrtovanje in konstrukcijo strojev in opreme za izdelavo papirja - 8. del: Naprave za mletje
Ta evropski standard se uporablja za nizkokonsistenčne naprave za mletje, tj. naprave, ki delujejo s suspenzijami vlaken primarne papirne kaše, mehanske lesovine ali razbarvane papirne kaše v vodi s konsistenco do približno 6 %, ki se uporabljajo v postopku izdelave papirja in velja skupaj s standardom EN 1034-1:2000+A1:2010. Opisuje večja tveganja, nevarne situacije in nevarne dogodke v zvezi z napravami za mletje, kadar se uporabljajo v skladu z njihovim namenom in pod pogoji, ki jih določa proizvajalec (glejte točko 4). Ta standard se ne uporablja za stepalnike. Ta dokument se ne uporablja za stroje, izdelane preden je CEN izdal ta dokument.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 8: MahlanlagenSécurité de machines - Exigences techniques de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 8: Usines de raffinageSafety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants85.100Oprema za papirno industrijoEquipment for the paper industry21.020Characteristics and design of machines, apparatus, equipment13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN 1034-8:2012SIST EN 1034-8:2012en,fr01-maj-2012SIST EN 1034-8:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1034-8
March 2012 ICS 85.100 English Version
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants
Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 8: Ateliers de raffinage
Sicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 8: Mahlanlagen This European Standard was approved by CEN on 8 January 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1034-8:2012: ESIST EN 1034-8:2012
Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 17Tables Table 1 — List of significant hazards . 9Table 2 — Safety Integrity Level und Performance Level.11Table 3 — Methods used to verify safety requirements and/or measures .15 SIST EN 1034-8:2012
1 Scope This European Standard applies to low consistency refining plants, i.e. plants working with suspensions of fibres of virgin pulp, mechanical wood pulp or deinking pulp in water with a consistency up to approximately 6 %, used in the paper making process and applies together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to refining plants, when used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This standard does not apply to beaters. This document is not applicable to machines which are manufactured before the date of publication of this document by CEN. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 349:1992+A1:2008, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body EN 614-1:2006+A1:2009, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles EN 614-2:2000+A1:2008, Safety of machinery — Ergonomic design principles — Part 2: Interaction between the design of machinery and work tasks EN 809:1998+A1:2009, Pumps and pump units for liquids — Common safety requirements EN 894-1:1997+A1:2008, Safety of machinery — Ergonomic requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators EN 894-2:1997+A1:2008, Safety of machinery — Ergonomic requirements for the design of displays and control actuators — Part 2: Displays EN 953:1997+A1:2009, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards EN 1034-1:2000+A1:2010, Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 1: Common requirements EN 1037:1995+A1:2008, Safety of machinery — Prevention of unexpected start-up EN 1837:1999+A1:2009, Safety of machinery — Integral lighting of machines EN 13023:2003+A1:2010, Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment — Accuracy grades 2 and 3 EN 60204-1:2006, Safety of machinery — Electrical equipment — Part 1: General requirements
(IEC 60204-1:2005, modified) EN 60204-11:2000, Safety of machinery — Electrical equipment of machines — Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV (IEC 60204-11:2000) EN 61000-6-2:2005, Electromagnetic compatibility (EMC) — Part 6-2: Generic standards — Immunity for industrial environments (IEC 61000-6-2:2005) SIST EN 1034-8:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.