EN ISO 10960:1996

SLOVENSKI STANDARD
01-december-2000
*XPHQHDOLSROLPHUQHFHYL2FHQDRGSRUQRVWLSURWLR]RQXSULGLQDPLþQLKSRJRMLK
,62
Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions
(ISO 10960:1994)
Gummi- und Kunststoffschläuche - Beurteilung der Ozonbeständigkeit unter
dynamischen Bedingungen (ISO 10960:1994)
Tuyaux en caoutchouc et en plastique - Evaluation de la résistance a l'ozone dans des
conditions dynamiques (ISO 10960:1994)
Ta slovenski standard je istoveten z: EN ISO 10960:1996
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

ISO
INTERNATIONAL
STANDARD 10960
First edition
1994-12-01
Rubber and plastics hoses 7 Assessment
of ozone resistance under dynamic
conditions
Tuyaux en caoutchouc et en plastique - t%aluation de Ia r&istance a
I’ozone dans des conditions dynamiques
Reference number
ISO 10960:1994(E)
ISO 10960:1994(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft international Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 10960 was prepared by Technical Committee
ISOnC 45, Rubber and rubber products, Subcommittee SC 1, Hoses
(rubber and plastics).
0 ISO 1994
All rights reserved. Unless otherwise specified, no part of this publication mag/ be reproduced
or utilized in a and
ny form or by any means, electronie or mechanical, rncluding photocopyrng
microfilm, wit hout permisse on In writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-121 1 Geneve 20 l Switzerland
Printed in Switzerland
ii
ISO 10960:1994(E)
INTERNATIONAL STANDARD 0 ISO
- Assessment of ozone
Rubber and plastics hoses
resistance under dynamic conditions
4 Apparatus
1 Scope
This International Standard specifies a method of as-
4.1 Ozone cabinet, with apparatus for generating
sessing the resistance of hoses to the deleterious ef-
ozone and monitoring and controlling the ozone con-
fects of atmospheric ozone under dynamic conditions.
centration as described in ISO 1431-1.
lt is applicable to hoses with bore diameters up to and
including 25 mm.
4.2 Test piece holder, as shown in figure 1, with
means of carrying out flexing at the required fre-
quency.
Details given in ISO 1431-1 :1989, subclause 5.6, shall
2 Normative references
be followed.
The following Standards contain provisions which,
All apparatus placed in the test cabinet shall be made
through reference in this text, constitute provisions
from materials which do not absorb or decompose
of this International Standard. At the time of publica-
ozone.
tion, the editions indicate
...