Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels

This European Standard gives guidance for manual, semi-mechanised, mechanised and automatic arc welding of ferritic steels(see clause 5), excluding ferritic stainless steels, in all product forms.

Schweißen - Empfehlungen zum Schweißen metallischer Werkstoffe - Teil 2: Lichtbogenschweißen von ferritischen Stählen

Diese Europäische Norm gibt Empfehlungen für manuelles, teilmechanisches, vollmechanisches und automatisches Lichtbogenschweißen ferritischer Stähle in allen Erzeugnisarten (siehe Abschnitt 5), ausgenommen nichtrostende ferritische Stähle.

Soudage - Recommendations pour le soudage des matériaux métalliques - Partie 2 : Soudage à l'arc des aciers ferritiques

La présente Norme européenne constitue un guide pour le soudage manuel à l'arc, semi-automatique et automatique des aciers ferritiques (voir article 5), à l'exception des aciers inoxydables ferritiques, dans toutes les formes de livraison.

Varjenje - Priporočila za varjenje kovinskih materialov - 2. del: Obločno varjenje feritnih jekel

General Information

Status
Published
Publication Date
09-Dec-2003
Withdrawal Date
29-Jun-2004
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
10-Dec-2003
Completion Date
10-Dec-2003

Relations

Buy Standard

Amendment
EN 1011-2:2001/A1:2004
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2004
9DUMHQMH3ULSRURþLOD]DYDUMHQMHNRYLQVNLKPDWHULDORYGHO2EORþQRYDUMHQMH
IHULWQLKMHNHO
Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of
ferritic steels
Schweißen - Empfehlungen zum Schweißen metallischer Werkstoffe - Teil 2:
Lichtbogenschweißen von ferritischen Stählen
Soudage - Recommendations pour le soudage des matériaux métalliques - Partie 2 :
Soudage a l'arc des aciers ferritiques
Ta slovenski standard je istoveten z: EN 1011-2:2001/A1:2003
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.080.20 Jekla Steels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 1011-2:2001/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2003
ICS 25.160.10
English version
Welding - Recommendations for welding of metallic materials -
Part 2: Arc welding of ferritic steels
Soudage - Recommendations pour le soudage des Schweißen - Empfehlungen zum Schweißen metallischer
matériaux métalliques - Partie 2 : Soudage à l'arc des Werkstoffe - Teil 2: Lichtbogenschweißen von ferritischen
aciers ferritiques Stählen
This amendment A1 modifies the European Standard EN 1011-2:2001; it was approved by CEN on 20 November 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHE
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.